H3C-POSA-MIB

All MIBs › H3C-POSA-MIB

Organization: H3C Technologies Co., Ltd.

Last Updated: 2010-04-09

Category: Vendor: H3C/HH3C

Description: H3C MIB for Point of Sale Adapter (POSA) managing serial-to-Ethernet conversion for POS terminal connectivity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-POSA-MIB?

This is an H3C (Hangzhou Huawei-3Com) enterprise MIB for the POSA (Point-Of-Sale Access) system, which provides serial-to-Ethernet conversion so that legacy POS terminals and card readers can connect over an IP network. It exposes server-level configuration (h3cPosaServerEnable, various FCM timeout settings), a table of POSA applications (h3cPosaAppTable/h3cPosaAppEntry indexed by h3cPosaAppID), and a set of trap-enable flags for server/application state changes and link negotiation failures. It is primarily a software/service status MIB—monitoring whether the POSA server and individual POS applications are enabled and operating, and whether FCM (transaction) timeouts or negotiation failures are occurring—useful for retail environments where terminal connectivity outages directly affect point-of-sale transactions. As an H3C enterprise MIB it stands on its own without a stated dependency on IETF standard MIBs. It is deployed on H3C switches or access devices providing POS terminal aggregation in retail networks. Engineers can download the H3C-POSA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-POSA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C switches/access devices with POSA (Point-of-Sale Access) modules

Monitoring Examples

An admin would poll h3cPosaAppTable/h3cPosaAppEntry by h3cPosaAppID to check each POS application's state, and watch for traps such as h3cPosaAppStateChangeTrapEnable, h3cPosaTerminalHangUpTrapEnable, or h3cPosaFcmLnkNegoFailTrapEnable firing. A terminal-hangup trap combined with rising h3cPosaFcmTradeTimeout occurrences would indicate a POS terminal losing its transaction session, useful for diagnosing checkout-lane outages.

What Can Be Monitored

POSA server enable state
POS application status
transaction (FCM) timeout events
link/negotiation failure traps
terminal hang-up events

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cCommon

OBJECT-IDENTITY

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using h3cPosaFcmStatTimeoutCnts OID:

Select an H3C switch/access device with POSA (Point-of-Sale Access) module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cPosaFcmStatTimeoutCnts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of disconnections because of trade timeouts. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cPosa	1.3.6.1.4.1.2011.10.2.92			This MIB is to provide the definition of the POSA (Point Of Sale Access) system.
h3cPosaControl	1.3.6.1.4.1.2011.10.2.92.1
INT h3cPosaServerEnable	1.3.6.1.4.1.2011.10.2.92.1.1	INTEGER	read-write	This attribute controls the starting or stoppage of POS access function. The defalut value is disabled(1).
I32 h3cPosaFcmAnswerTimeout	1.3.6.1.4.1.2011.10.2.92.1.2	Integer32	read-write	The maximum answer time of a POS connection through a FCM (Fast Connection Modem) interface. The answer time is the interval from the POS terminal sending request to the Router giving its reply, in units of milliseconds.
I32 h3cPosaFcmTradeTimeout	1.3.6.1.4.1.2011.10.2.92.1.3	Integer32	read-write	The maximum time of a POS trade through a FCM interface, in units of milliseconds.
I32 h3cPosaFcmIdleTimeout	1.3.6.1.4.1.2011.10.2.92.1.4	Integer32	read-write	The maximum idle time of a POS connection through the FCM interface, in units of seconds.
T/F h3cPosaSrvStateChangeTrapEnable	1.3.6.1.4.1.2011.10.2.92.1.5	TruthValue	read-write	This attribute controls whether the h3cPosaServerStatusChange trap will be sent or not.
T/F h3cPosaAppStateChangeTrapEnable	1.3.6.1.4.1.2011.10.2.92.1.6	TruthValue	read-write	This attribute controls whether the h3cPosaAppStateChange trap will be sent or not.
T/F h3cPosaTerminalHangUpTrapEnable	1.3.6.1.4.1.2011.10.2.92.1.7	TruthValue	read-write	This attribute controls whether the h3cPosaTerminalHangUp trap will be sent or not.
T/F h3cPosaFcmLnkNegoFailTrapEnable	1.3.6.1.4.1.2011.10.2.92.1.8	TruthValue	read-write	This attribute controls whether the h3cPosaFcmLinkNegoFailed trap will be sent or not.
T/F h3cPosaFcmPhyNegoFailTrapEnable	1.3.6.1.4.1.2011.10.2.92.1.9	TruthValue	read-write	This attribute controls whether the h3cPosaFcmPhyNegoFailed trap will be sent or not.
h3cPosaTables	1.3.6.1.4.1.2011.10.2.92.2
h3cPosaAppTable	1.3.6.1.4.1.2011.10.2.92.2.1		not-accessible	This table shows the configuration information and running status of POS application.
h3cPosaAppEntry	1.3.6.1.4.1.2011.10.2.92.2.1.1		not-accessible	This table shows the configuration information and running status of POS application.
I32 h3cPosaAppID	1.3.6.1.4.1.2011.10.2.92.2.1.1.1	Integer32	accessible-for-notify	The identification of a POS application. It ranges from 1 to 31.
H3C h3cPosaAppServiceType	1.3.6.1.4.1.2011.10.2.92.2.1.1.2	H3cAppServiceType	read-create	The service type of a POS application. It means the way in which the router connects with the application server.
I32 h3cPosaAppIfIndex	1.3.6.1.4.1.2011.10.2.92.2.1.1.3	Integer32	read-create	This attribute is the ifindex through which the router connecting with the application server, if the service type of POS application is flow(2). It is invalid if the service type is tcp(1). At preasent, it supports 5 types of interface: FCM, SERIAL, ASYNC, AM (Analog Modem) and AUX.
H3C h3cPosaAppMode	1.3.6.1.4.1.2011.10.2.92.2.1.1.4	H3cAppMode	read-create	The work mode of a POS application.
IPt h3cPosaAppHostIPType	1.3.6.1.4.1.2011.10.2.92.2.1.1.5	InetAddressType	read-create	The IP address type of the application server. And now it must be IPV4. It is invalid if the service type is flow(2).
IP h3cPosaAppHostIP	1.3.6.1.4.1.2011.10.2.92.2.1.1.6	InetAddress	read-create	The IP address of the application server. And now it only supports IPV4. It is invalid if the service type is flow(2).
I32 h3cPosaAppHostPort	1.3.6.1.4.1.2011.10.2.92.2.1.1.7	Integer32	read-create	The listening port of the application server. If the information of the application server is not specified, this object will return the value 0. It is invalid if the service type is flow(2).
IPt h3cPosaAppRouterIPType	1.3.6.1.4.1.2011.10.2.92.2.1.1.8	InetAddressType	read-create	The source IP address type of the access router. Now it must be ipv4. It is invalid if the service type is flow(2).
IP h3cPosaAppRouterIP	1.3.6.1.4.1.2011.10.2.92.2.1.1.9	InetAddress	read-create	The source IP address of access router used in connecting with application server. Now it only supports ipv4. It is invalid if the service type is flow(2).
I32 h3cPosaAppKeepAliveInterval	1.3.6.1.4.1.2011.10.2.92.2.1.1.10	Integer32	read-create	The TCP keep alive interval of the connection between the router and the application server. In unit of seconds. The default value is 2 seconds. It is valid only when the service type is tcp(1).
I32 h3cPosaAppKeepAliveCount	1.3.6.1.4.1.2011.10.2.92.2.1.1.11	Integer32	read-create	The maximum number of sending TCP keep alive packets. It is valid only when the service type is tcp(1).
I32 h3cPosaAppConnectTimeout	1.3.6.1.4.1.2011.10.2.92.2.1.1.12	Integer32	read-create	The maximum interval that the router waits for the reply from application server after sending the request for establishing a TCP connection. It is invalid if the service type is flow(2).
H3C h3cPosaAppState	1.3.6.1.4.1.2011.10.2.92.2.1.1.13	H3cPeerState	read-only	The current running state of application server.
ROW h3cPosaAppRowStatus	1.3.6.1.4.1.2011.10.2.92.2.1.1.14	RowStatus	read-create	Operation status.
OCT h3cPosaAppName	1.3.6.1.4.1.2011.10.2.92.2.1.1.15	OCTET STRING	read-create	The description of a POS application.
T/F h3cPosaCallerIDTransEnable	1.3.6.1.4.1.2011.10.2.92.2.1.1.16	TruthValue	read-create	Enable or disable the caller-id transmission function.
H3C h3cPosaTpduChangeStrategy	1.3.6.1.4.1.2011.10.2.92.2.1.1.17	H3cTpduChangeStrategy	read-create	Set the strategy to modify the address of the packet from terminals before delivering it to application server.
h3cPosaTerminalTable	1.3.6.1.4.1.2011.10.2.92.2.2		not-accessible	This table shows the configuration information and running status of POS terminal.
h3cPosaTerminalEntry	1.3.6.1.4.1.2011.10.2.92.2.2.1		not-accessible	This table shows the configuration information and running status of POS terminal.
I32 h3cPosaTerminalID	1.3.6.1.4.1.2011.10.2.92.2.2.1.1	Integer32	not-accessible	The identification of a POS terminal.
H3C h3cPosaTerminalAccessType	1.3.6.1.4.1.2011.10.2.92.2.2.1.2	H3cTerminalAccessType	read-create	The access type of a POS terminal.
I32 h3cPosaTerminalIfIndex	1.3.6.1.4.1.2011.10.2.92.2.2.1.3	Integer32	read-create	The ifindex of the interface through which connects the POS terminal and the router. It is invalid if the access type is TCP.
I32 h3cPosaTerminalTransAppID	1.3.6.1.4.1.2011.10.2.92.2.2.1.4	Integer32	read-create	The identification of the application server to which all the packets from this POS terminal will be sent. If this object is set to 0, the destination application server to which a packet from this POS terminal will be sent is determined by its TPDU (Transport Protocol Data Unit) destination address. It is invalid if the access type is TCP.
I32 h3cPosaTerminalListenPort	1.3.6.1.4.1.2011.10.2.92.2.2.1.5	Integer32	read-create	The listening port accepting the connection from POS terminals. It is valid only when the access type is TCP.
H3C h3cPosaTerminalState	1.3.6.1.4.1.2011.10.2.92.2.2.1.6	H3cPeerState	read-only	The current running status of a POS terminal.
ROW h3cPosaTerminalRowStatus	1.3.6.1.4.1.2011.10.2.92.2.2.1.7	RowStatus	read-create	Operation status.
OCT h3cPosaTerminalName	1.3.6.1.4.1.2011.10.2.92.2.2.1.8	OCTET STRING	read-create	The description of a POS terminal.
I32 h3cPosaTerminalCfgIfIndex	1.3.6.1.4.1.2011.10.2.92.2.2.1.9	Integer32	read-only	The ifindex of the interface on which the terminal configuration is. If it is a physical interface, its value is equal to that of h3cPosaTerminalIfIndex.
h3cPosaMapTable	1.3.6.1.4.1.2011.10.2.92.2.3		not-accessible	This table describe the application-mapping information.
h3cPosaMapEntry	1.3.6.1.4.1.2011.10.2.92.2.3.1		not-accessible	This table describe the application-mapping information.
OCT h3cPosaMapDestCode	1.3.6.1.4.1.2011.10.2.92.2.3.1.1	OCTET STRING	not-accessible	The destination code of the mapping item. Generally, the destination code is a 4-character-string. If the destination address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special destination code, 'default', is for default mapping item.
I32 h3cPosaMapAppID	1.3.6.1.4.1.2011.10.2.92.2.3.1.2	Integer32	read-create	The identifier of POS application. It is the index of h3cPosaAppTable.
ROW h3cPosaMapRowStatus	1.3.6.1.4.1.2011.10.2.92.2.3.1.3	RowStatus	read-create	Operation status.
OCT h3cPosaMapSrcCode	1.3.6.1.4.1.2011.10.2.92.2.3.1.4	OCTET STRING	not-accessible	The source code of the mapping item. Generally, the source code is a 4-character-string. If the source address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special source code, 'default', is for default mapping item.
h3cPosaFcmStatTable	1.3.6.1.4.1.2011.10.2.92.2.4		not-accessible	This table shows the statistics information of FCM interface.
h3cPosaFcmStatEntry	1.3.6.1.4.1.2011.10.2.92.2.4.1		not-accessible	This table shows the statistics information of FCM interface.
I32 h3cPosaFcmStatIfIndex	1.3.6.1.4.1.2011.10.2.92.2.4.1.1	Integer32	not-accessible	The index of FCM interface.
C32 h3cPosaFcmStatTimeoutCntsEx	1.3.6.1.4.1.2011.10.2.92.2.4.1.2	Counter32	read-only	The number of disconnections because of trade timeouts.
C32 h3cPosaFcmStatConnectFailCnts	1.3.6.1.4.1.2011.10.2.92.2.4.1.3	Counter32	read-only	The number of connection failures because of unsuccessful negotiations.
h3cPosaAppStatTable	1.3.6.1.4.1.2011.10.2.92.2.5		not-accessible	This table shows the statistics information of application.
h3cPosaAppStatEntry	1.3.6.1.4.1.2011.10.2.92.2.5.1		not-accessible	This table shows the statistics information of application.
C32 h3cPosaAppRecvPkts	1.3.6.1.4.1.2011.10.2.92.2.5.1.1	Counter32	read-only	The number of packets recieved from the application server.
C32 h3cPosaAppSendPkts	1.3.6.1.4.1.2011.10.2.92.2.5.1.2	Counter32	read-only	The number of packets sent to the application server.
C32 h3cPosaAppErrPkts	1.3.6.1.4.1.2011.10.2.92.2.5.1.3	Counter32	read-only	The number of inbound packets that contained errors.
C32 h3cPosaAppDistributeErrCnts	1.3.6.1.4.1.2011.10.2.92.2.5.1.4	Counter32	read-only	The number of packets that are discarded when no corresponding POS terminal can be found.
C32 h3cPosaAppInDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.5.1.5	Counter32	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C32 h3cPosaAppOutDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.5.1.6	Counter32	read-only	The number of outbound packets that are discarded because of link errors between the router and the application server.
h3cPosaTerminalStatTable	1.3.6.1.4.1.2011.10.2.92.2.6		not-accessible	This table shows the statistics information of application.
h3cPosaTerminalStatEntry	1.3.6.1.4.1.2011.10.2.92.2.6.1		not-accessible	This table shows the statistics information of application.
C32 h3cPosaTerminalRecvPkts	1.3.6.1.4.1.2011.10.2.92.2.6.1.1	Counter32	read-only	The number of packets recieved from the POS terminal.
C32 h3cPosaTerminalSendPkts	1.3.6.1.4.1.2011.10.2.92.2.6.1.2	Counter32	read-only	The number of packets sent to the POS terminal.
C32 h3cPosaTerminalErrPkts	1.3.6.1.4.1.2011.10.2.92.2.6.1.3	Counter32	read-only	The number of inbound packets that contained errors.
C32 h3cPosaTerminalMapErrCnts	1.3.6.1.4.1.2011.10.2.92.2.6.1.4	Counter32	read-only	The number of packets that are discarded because of mapping errors.
C32 h3cPosaTerminalInDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.6.1.5	Counter32	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C32 h3cPosaTerminalOutDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.6.1.6	Counter32	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal.
h3cPosaBatchTerminalTable	1.3.6.1.4.1.2011.10.2.92.2.7		not-accessible	The table of the configuration information relevant to a batch of POS terminals.
h3cPosaBatchTerminalEntry	1.3.6.1.4.1.2011.10.2.92.2.7.1		not-accessible	The configuration information relevant to a batch of POS terminals.
I32 h3cPosaBatchTerminalFirstID	1.3.6.1.4.1.2011.10.2.92.2.7.1.1	Integer32	read-create	The first ID of the batch of POS terminals.
ROW h3cPosaBatchTerminalRowStatus	1.3.6.1.4.1.2011.10.2.92.2.7.1.2	RowStatus	read-create	Operation status.
h3cPosaTcpTermStatTable	1.3.6.1.4.1.2011.10.2.92.2.8		not-accessible	This table shows the statistics information of terminal whose access type is tcp.
h3cPosaTcpTermStatEntry	1.3.6.1.4.1.2011.10.2.92.2.8.1		not-accessible	This table shows the statistics information of terminal whose access type is tcp.
I32 h3cPosaTcpTermStatIndex	1.3.6.1.4.1.2011.10.2.92.2.8.1.1	Integer32	not-accessible	The index of entity.
IPt h3cPosaTcpTermStatIPType	1.3.6.1.4.1.2011.10.2.92.2.8.1.2	InetAddressType	read-create	The type of Internet address. And now it must be ipv4.
IP h3cPosaTcpTermStatIP	1.3.6.1.4.1.2011.10.2.92.2.8.1.3	InetAddress	read-create	The IP address or the subnet of the statistics terminal(s). When the vlaue is a subnet, the statistics of all the terminals in the subnet will be added up. And now it only supports ipv4.
IP h3cPosaTcpTermStatIPMask	1.3.6.1.4.1.2011.10.2.92.2.8.1.4	InetAddress	read-create	The mask associated with the IP address or the subnet. And now it only supports ipv4.
C64 h3cPosaTcpTermRecvPkts	1.3.6.1.4.1.2011.10.2.92.2.8.1.5	Counter64	read-only	The number of packets recieved from the POS terminal(s).
C64 h3cPosaTcpTermSendPkts	1.3.6.1.4.1.2011.10.2.92.2.8.1.6	Counter64	read-only	The number of packets sent to the POS terminal(s).
C64 h3cPosaTcpTermErrPkts	1.3.6.1.4.1.2011.10.2.92.2.8.1.7	Counter64	read-only	The number of inbound packets that contained errors.
C64 h3cPosaTcpTermMapErrCnts	1.3.6.1.4.1.2011.10.2.92.2.8.1.8	Counter64	read-only	The number of packets that are discarded because of mapping errors.
C64 h3cPosaTcpTermInDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.8.1.9	Counter64	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C64 h3cPosaTcpTermOutDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.8.1.10	Counter64	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
ROW h3cPosaTcpTermStatRowStatus	1.3.6.1.4.1.2011.10.2.92.2.8.1.11	RowStatus	read-create	Operation status.
h3cPosaFcmConfTable	1.3.6.1.4.1.2011.10.2.92.2.9		not-accessible	This table shows the configuration information of FCM (Fast Connection Modem) interfaces.
h3cPosaFcmConfEntry	1.3.6.1.4.1.2011.10.2.92.2.9.1		not-accessible	This entry shows the configuration information of FCM (Fast Connection Modem) interfaces.
I32 h3cPosaFcmNegoHookOff	1.3.6.1.4.1.2011.10.2.92.2.9.1.1	Integer32	read-write	Delay time for hookoff.
I32 h3cPosaFcmNegoSilence	1.3.6.1.4.1.2011.10.2.92.2.9.1.2	Integer32	read-write	Silence time for modem negotiation.
I32 h3cPosaFcmNegoScrmbBinary1	1.3.6.1.4.1.2011.10.2.92.2.9.1.3	Integer32	read-write	Scramble-binary1 time for modem negotiation.
I32 h3cPosaFcmNegoUnscrmbBinary1	1.3.6.1.4.1.2011.10.2.92.2.9.1.4	Integer32	read-write	Unscramble-binary1 time for modem negotiation.
I32 h3cPosaFcmThresholdRlsdOff	1.3.6.1.4.1.2011.10.2.92.2.9.1.5	Integer32	read-write	RLSD (Received Line Signal Detect) off threshold for modem.
I32 h3cPosaFcmThresholdRlsdOn	1.3.6.1.4.1.2011.10.2.92.2.9.1.6	Integer32	read-write	RLSD (Received Line Signal Detect) on threshold for modem.
I32 h3cPosaFcmThresholdTxPower	1.3.6.1.4.1.2011.10.2.92.2.9.1.7	Integer32	read-write	TX power for modem.
I32 h3cPosaFcmThresholdAnswerTone	1.3.6.1.4.1.2011.10.2.92.2.9.1.8	Integer32	read-write	Answer tone level for modem.
h3cPosaCallerStatTable	1.3.6.1.4.1.2011.10.2.92.2.10		not-accessible	This table shows the statistics information of terminal according the caller-ID.
h3cPosaCallerStatEntry	1.3.6.1.4.1.2011.10.2.92.2.10.1		not-accessible	This table shows the statistics information of terminal according the caller-ID.
OCT h3cPosaCallerStatCallerID	1.3.6.1.4.1.2011.10.2.92.2.10.1.1	OCTET STRING	not-accessible	The caller number.
C64 h3cPosaCallerRecvPkts	1.3.6.1.4.1.2011.10.2.92.2.10.1.2	Counter64	read-only	The number of packets recieved from the POS terminal(s).
C64 h3cPosaCallerSendPkts	1.3.6.1.4.1.2011.10.2.92.2.10.1.3	Counter64	read-only	The number of packets sent to the POS terminal(s).
C64 h3cPosaCallerErrPkts	1.3.6.1.4.1.2011.10.2.92.2.10.1.4	Counter64	read-only	The number of inbound packets that contained errors.
C64 h3cPosaCallerMapErrCnts	1.3.6.1.4.1.2011.10.2.92.2.10.1.5	Counter64	read-only	The number of packets that are discarded because of mapping errors.
C64 h3cPosaCallerInDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.10.1.6	Counter64	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C64 h3cPosaCallerOutDiscardedPkts	1.3.6.1.4.1.2011.10.2.92.2.10.1.7	Counter64	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
ROW h3cPosaCallerStatRowStatus	1.3.6.1.4.1.2011.10.2.92.2.10.1.8	RowStatus	read-create	Operation status.
h3cPosaTrap	1.3.6.1.4.1.2011.10.2.92.3
h3cPosaTrapPrex	1.3.6.1.4.1.2011.10.2.92.3.0
NTF h3cPosaServerStatusChange	1.3.6.1.4.1.2011.10.2.92.3.0.1			This trap is generated when the POS function is started or stopped.
NTF h3cPosaAppStateChange	1.3.6.1.4.1.2011.10.2.92.3.0.2			This trap is generated whenever the availability of application server changes.
NTF h3cPosaTerminalHangUp	1.3.6.1.4.1.2011.10.2.92.3.0.3			This trap is generated whenever the POS connection through a FCM (Fast Connection Modem) interface is hanged up by POS terminal.
NTF h3cPosaFcmLinkNegoFailed	1.3.6.1.4.1.2011.10.2.92.3.0.4			This trap is generated whenever the link layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
NTF h3cPosaFcmPhyNegoFailed	1.3.6.1.4.1.2011.10.2.92.3.0.5			This trap is generated whenever the physical layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
h3cPosaTrapObjects	1.3.6.1.4.1.2011.10.2.92.3.1
INT h3cPosaAppStateChangeObject	1.3.6.1.4.1.2011.10.2.92.3.1.1	INTEGER	accessible-for-notify	This is a dummy MIB object referenced by the h3cPosaAppStateChange trap. This object shows the availability changing of corresponding application server.

RFC description

Manages Point Of Sale Access (POSA) systems on H3C network devices including FCM configuration and terminal connections.

Start monitoring H3C switch/access device with POSA (Point-of-Sale Access) module with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-POSA-MIB