All MIBs › H3C-DOT11-APMT-MIB
Organization: Hangzhou H3C Technologies Co., Ltd.
Last Updated: 2010-10-11
Category: Technology: Wireless, Vendor: H3C/HH3C
Description: H3C MIB for 802.11 wireless Access Point Management (APMT) covering AP registration, configuration, and monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is H3C-DOT11-APMT-MIB?
H3C-DOT11-APMT-MIB is an H3C proprietary MIB reporting Access Point (AP) status in a Fit-AP wireless deployment managed by an Access Controller (AC). Its AP-object-status table, keyed by AP ID, records IP/MAC address, operation status, template name, a reset action, CPU usage, connection type, last-image-download time, IPv6 address, and last-register time, while a companion current-AP table reports the AC port index, MAC mode, template name, associated-station count, name, model name, and image name for currently-online APs. As a hardware/software-status MIB it lets an administrator confirm an AP's CPU usage and associated-client count, and trigger a remote reset. It is deployed on H3C Fit-AP wireless deployments managed by an Access Controller. Engineers can download the H3C-DOT11-APMT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-DOT11-APMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C Fit-AP wireless deployments (Access Controller-managed)
Monitoring Examples
An administrator checks h3cDot11CurrAPStationAssocCount and h3cDot11APCpuUsage to identify an overloaded AP before it starts rejecting new wireless client associations on an H3C WLAN.
What Can Be Monitored
- AP CPU usage and associated-client count
This MIB depends on
Related MIBs
Imported Objects
From H3C-DOT11-REF-MIB
| H3cDot11ChannelScopeType | |
| H3cDot11MACModeType | |
| H3cDot11NotifyReasonType | |
| H3cDot11ObjectIDType | |
| H3cDot11RFModeType | |
| H3cDot11RadioElementIndex | |
| H3cDot11RadioScopeType | |
| H3cDot11SSIDStringType | |
| H3cDot11ServicePolicyIDType | |
| H3cDot11TxPwrLevelScopeType | |
| h3cDot11 | MODULE-IDENTITY |
| h3cDot11APElementIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using h3cDot11ChannelSwitchTimes OID:
Select an H3C wireless access point (Fit-AP status, AC-managed) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cDot11ChannelSwitchTimes into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the channel switch times. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| h3cDot11APMT | 1.3.6.1.4.1.2011.10.2.75.2 | This MIB provides AP information which includes AP current object information, AP statistic data. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable STA invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. | ||
| h3cDot11APObjectGroup | 1.3.6.1.4.1.2011.10.2.75.2.1 | |||
| h3cDot11APObjectStatusTable | 1.3.6.1.4.1.2011.10.2.75.2.1.1 | not-accessible | The table will provide the general information about APs in different status. | |
| h3cDot11APObjectStatusEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1 | not-accessible | Each entry contains the general information of an AP. | |
| H3C h3cDot11APID | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.1 | H3cDot11ObjectIDType | accessible-for-notify | To uniquely identify each AP, and relation-ship between h3cDot11APID and AP device will be static. |
| IP h3cDot11APIPAddress | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.2 | IpAddress | read-only | Represents the IP address of an AP. |
| MAC h3cDot11APMacAddress | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.3 | MacAddress | read-only | Represents the MAC address of an AP. |
| INT h3cDot11APOperationStatus | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.4 | INTEGER | read-only | Represents operational status of AP. The following values are supported: join(1) - AP is joining to AC. joinConfirm(2) - AC confirm whether permit AP to join. download(3) - AP is downloading software from AC. config(4) - AP and AC exchange configuration before AP - provide WLAN service. run(5) - The WLAN service is ready. |
| OCT h3cDot11APTemplateNameOfAP | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.5 | OCTET STRING | read-only | Represents the name of current AP template configured for AP. |
| T/F h3cDot11APReset | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.6 | TruthValue | read-write | When read the value from the node 2: Represents the AP can not be reseted. 1: Represents the AP can be reseted. When write the value to the node 1: Represents reseting the AP. Other values are not supported |
| I32 h3cDot11APCpuUsage | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.7 | Integer32 | read-only | Represents the current CPU usage for AP. |
| INT h3cDot11APConnectionType | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.8 | INTEGER | read-only | Represents the current connection type. |
| DAT h3cDot11APLastImgDownloadTime | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.9 | DateAndTime | read-only | Represents the time at which the device last downloaded image. |
| OCT h3cDot11APIPv6Address | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.10 | OCTET STRING | read-only | Represents the IPv6 address of AP. |
| DAT h3cDot11APLastRegisterTime | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.11 | DateAndTime | read-only | Represents the time at which the device last registered with AC. |
| h3cDot11APObjectTable | 1.3.6.1.4.1.2011.10.2.75.2.1.2 | not-accessible | The table will provide information for APs in the running status. | |
| h3cDot11APObjectEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1 | not-accessible | Each entry contains information of an AP in run status. | |
| H3C h3cDot11APObjID | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.1 | H3cDot11ObjectIDType | not-accessible | To uniquely identify each AP, and relation-ship between h3cDot11APObjID and AP device will be static. |
| IP h3cDot11CurrAPIPAddress | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.2 | IpAddress | read-only | Represents the IP address of an AP. |
| MAC h3cDot11CurrAPMacAddress | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.3 | MacAddress | read-only | Represents the MAC address of an AP. |
| I32 h3cDot11CurrACPortIndex | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.4 | Integer32 | read-only | Represents the port on the AC, by which the traffic of this AP comes through. NMS could refer it to access information kept in the MIB-2. |
| H3C h3cDot11CurrAPMACMode | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.5 | H3cDot11MACModeType | read-only | Represents what MAC mode defined in the CAPWAP is applied. For fat AP, the value will be fatap. |
| OCT h3cDot11CurrAPTemplateName | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.6 | OCTET STRING | read-only | Represents the name of current AP template. |
| I32 h3cDot11CurrAPStationAssocCount | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.7 | Integer32 | read-only | Represents the total number of stations which are associating to AP. |
| OCT h3cDot11CurrAPName | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.8 | OCTET STRING | read-only | Represents the name of AP. |
| OCT h3cDot11CurrAPModelName | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.9 | OCTET STRING | read-only | Represents index of WTP model,with it to get AP model information. |
| OCT h3cDot11CurrAPImageName | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.10 | OCTET STRING | read-only | Represents the image file name of AP. |
| OCT h3cDot11CurrAPSoftwareVersion | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.11 | OCTET STRING | read-only | Represents the software version of AP. |
| IP h3cDot11CurrAPIPNetMask | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.12 | IpAddress | read-only | Represents the IP netmask of AP. |
| I32 h3cDot11CurrRadioModeSupport | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.13 | Integer32 | read-only | Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4). |
| I32 h3cDot11CurrIfNumber | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.14 | Integer32 | read-only | Represents number of interface of the AP. |
| I32 h3cDot11CurrAPElementID | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.15 | Integer32 | read-only | Represents the AP element ID. |
| INT h3cDot11CurrAPMode | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.16 | INTEGER | read-only | Represents the forward mode of the AP. |
| OCT h3cDot11CurrAPIPv6Address | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.17 | OCTET STRING | read-only | Represents the IPv6 address of AP. |
| I32 h3cDot11CurrAPSSIDNumber | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.18 | Integer32 | read-only | Represents the number of SSID configured on AP. |
| OCT h3cDot11CurrAPManufacturer | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.19 | OCTET STRING | read-only | By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP. |
| I32 h3cDot11CurrAPMemorySize | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.20 | Integer32 | read-only | Represents the size of AP memory. |
| I32 h3cDot11CurrAPMemSizeInBytes | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.21 | Integer32 | read-only | Represents the size of AP memory. |
| I32 h3cDot11CurrAPFlashSize | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.22 | Integer32 | read-only | Represents the size of AP flash. |
| I32 h3cDot11CurrAPFlashSizeInBytes | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.23 | Integer32 | read-only | This object represents the size of AP flash. |
| OCT h3cDot11CurrAPReleasedVersion | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.24 | OCTET STRING | read-only | Represents the released version of AP. |
| h3cDot11APRadioTable | 1.3.6.1.4.1.2011.10.2.75.2.1.3 | not-accessible | The table will describe the radio information of AP. The AP here will be in running status. | |
| h3cDot11APRadioEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1 | not-accessible | Each entry contains the information of each radio of a specific AP. | |
| H3C h3cDot11CurAPID | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.1 | H3cDot11ObjectIDType | not-accessible | To uniquely identify a AP in running status. |
| H3C h3cDot11RadioID | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.2 | H3cDot11RadioScopeType | accessible-for-notify | Represents each radio. |
| T/F h3cDot11AdminStatus | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.3 | TruthValue | read-only | Represents the administrator status of radio. |
| T/F h3cDot11OperStatus | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.4 | TruthValue | read-only | Represents the operational status of radio. |
| H3C h3cDot11Channel | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.5 | H3cDot11ChannelScopeType | read-only | Represents the current channel allocation for radio. |
| H3C h3cDot11TxPowerLevel | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.6 | H3cDot11TxPwrLevelScopeType | read-only | Represents the current transmit power level for radio. |
| I32 h3cDot11APRadioIfIndex | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.7 | Integer32 | read-only | Represents the interface index for the radio. |
| I32 h3cDot11AntennaGain | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.8 | Integer32 | read-only | Represents the current gain for antenna. |
| I32 h3cDot11MaxBandwidth | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.9 | Integer32 | read-only | Represents the maximum bandwidth for the radio. |
| I32 h3cDot11ResourceUseRatio | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.10 | Integer32 | read-only | Represents the ratio of radio resource usage. |
| U32 h3cDot11RadioModeSupport | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.11 | Unsigned32 | read-only | Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11gn(16), dot11an(32). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4). |
| INT h3cDot11TxPowerLevel2 | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.12 | INTEGER | read-only | The TxPowerLevel N currently being used to transmit data. |
| T/F h3cDot11PowerMgmtStatus | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.13 | TruthValue | read-only | Represents status of power management of the radio. |
| C32 h3cDot11ChannelSwitchTimesEx | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.14 | Counter32 | read-only | Represents the channel switch times. |
| OCT h3cDot11AntennaType | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.15 | OCTET STRING | read-only | Represents type of the antenna which radio used. |
| T/F h3cDot11DiversitySelectionRx | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.16 | TruthValue | read-only | Represents the diversity selection received. |
| OCT h3cDot11MaxTxPwrLvl | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.17 | OCTET STRING | read-only | Represents the maximum transmit power. |
| I32 h3cDot11PwrAttRange | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.18 | Integer32 | read-only | Represents the range of power attenuation. |
| I32 h3cDot11AvgRxSignalStrength | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.19 | Integer32 | read-only | Represents the average received signal strength. |
| I32 h3cDot11HighestRxSignalStrength | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.20 | Integer32 | read-only | Represents the highest received signal strength. |
| I32 h3cDot11LowestRxSignalStrength | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.21 | Integer32 | read-only | Represents the lowest received signal strength. |
| C32 h3cDot11RadioIfUpdownTimes | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.22 | Counter32 | read-only | Represents the up/down times on radio interface. |
| TIK h3cDot11RadioIfLastChange | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.23 | TimeTicks | read-only | Represents time at last change that occurred on radio interface. |
| h3cDot11APBSSTable | 1.3.6.1.4.1.2011.10.2.75.2.1.4 | not-accessible | After AP connect to AC and get AP template configuration, it will create BSS data structure for each radio. The table will describe BSS information of AP and service policy as per BSS. | |
| h3cDot11APBSSEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1 | not-accessible | Each entry contains information of each BSS for specific radio. | |
| I32 h3cDot11WlanID | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.1 | Integer32 | not-accessible | Represents ID of a specific ESS. |
| MAC h3cDot11BSSID | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.2 | MacAddress | read-only | As MAC Address format, it is to identify BSS. |
| H3C h3cDot11CurrSvcPolicyID | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.3 | H3cDot11ServicePolicyIDType | read-only | Represents the ID of each service policy used by the AP. |
| OCT h3cDot11SSID | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.4 | OCTET STRING | read-only | This object represents the SSID corresponding to this BSS. |
| I32 h3cDot11CurrSSIDResourceUseRatio | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.5 | Integer32 | read-only | Represents the ratio of resource usage of curr SSID |
| I32 h3cDot11APEssVlanId | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.6 | Integer32 | read-only | This object represents the VlanID of the interface ESS corresponding to this BSS. |
| h3cDot11APModelTable | 1.3.6.1.4.1.2011.10.2.75.2.1.5 | not-accessible | The table defines the capability information for a specific kind of AP. | |
| h3cDot11APModelEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1 | not-accessible | Each entry contains capability information for a specific kind of AP. | |
| OCT h3cDot11APModelAlias | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.1 | OCTET STRING | not-accessible | Represents alias of AP model name. |
| OCT h3cDot11APModelName | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.2 | OCTET STRING | read-only | Represents AP model name(like WA2100). |
| H3C h3cDot11RadioNumSupport | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.3 | H3cDot11RadioScopeType | read-only | Represents how many radios the specific AP model could support. |
| I32 h3cDot11StationNumSupport | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.4 | Integer32 | read-only | Represents how many station could be supported by a specific AP model. |
| H3C h3cDot11MACModeSupport | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.5 | H3cDot11MACModeType | read-only | Represents the MAC mode type could be supported by a specific AP model. |
| OCT h3cDot11APManufacturer | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.6 | OCTET STRING | read-only | By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP. |
| OCT h3cDot11APCPUType | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.7 | OCTET STRING | read-only | Represents the CPU type of AP |
| U32 h3cDot11APCPUClockSpeed | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.8 | Unsigned32 | read-only | Represents the clock speed of CPU. |
| OCT h3cDot11APMemoryType | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.9 | OCTET STRING | read-only | Represents the memory card type of AP |
| OCT h3cDot11APFlashType | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.11 | OCTET STRING | read-only | Represents the flash card type of AP |
| U32 h3cDot11APFlashSize | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.12 | Unsigned32 | read-only | Represents the size of AP flash card. |
| G32 h3cDot11APMemSize | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.13 | Gauge32 | read-only | Represents the size of AP memory card. |
| U32 h3cDot11APFlashSizeInBytes | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.14 | Unsigned32 | read-only | This object represents the size of AP flash card in bytes. |
| U32 h3cDot11APMemorySize | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.20 | Unsigned32 | read-only | Represents the size of AP memory card. |
| h3cDot11APIfTable | 1.3.6.1.4.1.2011.10.2.75.2.1.6 | not-accessible | This table represents the AP interface informations. | |
| h3cDot11APIfEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1 | not-accessible | Each entry of the table will provide data for the interface of AP. | |
| I32 h3cDot11APIfIndex | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.1 | Integer32 | not-accessible | Represents the index for a interface. |
| OCT h3cDot11APIfDescr | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.2 | OCTET STRING | read-only | Represents the interface description for a interface. |
| I32 h3cDot11APIfType | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.3 | Integer32 | read-only | Represents the interface type for a interface. |
| I32 h3cDot11APIfMtu | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.4 | Integer32 | read-write | Represents size of the largest datagram which can be sent/received on the interface, specified in octets. |
| OCT h3cDot11APIfPHYAddress | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.5 | OCTET STRING | read-only | Represents the PHY address of interface. |
| I32 h3cDot11APIfSpeed | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.6 | Integer32 | read-only | Represents maximum bandwidth of this interface. |
| I32 h3cDot11APIfInDataRate | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.7 | Integer32 | read-only | Represents the average input data rate of this interface in latest 300 seconds. |
| I32 h3cDot11APIfOutDataRate | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.8 | Integer32 | read-only | Represents the average output data rate of this interface in latest 300 seconds. |
| G32 h3cDot11APIfSpeedKbps | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.9 | Gauge32 | read-only | Represents maximum bandwidth of this interface. |
| h3cDot11APSSIDObjectTable | 1.3.6.1.4.1.2011.10.2.75.2.1.7 | not-accessible | This table provides BSSID number configuration information based on SSID. | |
| h3cDot11APSSIDObjectEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1 | not-accessible | Each entry provides BSSID number configuration information of a SSID. | |
| H3C h3cDot11APConfigSPID | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.1 | H3cDot11ServicePolicyIDType | not-accessible | Represents the service policy ID. |
| STR h3cDot11APConfigSSIDName | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.2 | H3cDot11SSIDStringType | read-only | Represents the SSID name of this service policy. |
| I32 h3cDot11APConfigBSSIDNum | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.3 | Integer32 | read-only | Represents the number of BSSID that be configured with current SSID. |
| h3cDot11APSysInfoTable | 1.3.6.1.4.1.2011.10.2.75.2.1.8 | not-accessible | The table provides the system information of the AP. | |
| h3cDot11APSysInfoEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1 | not-accessible | Each entry provides system information of an AP. | |
| TIK h3cDot11APSysUpTime | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.1 | TimeTicks | read-only | Represents how long AP has been powered on. |
| I32 h3cDot11APCPURTUsage | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.2 | Integer32 | read-only | Represents the CPU real time usage for AP. |
| I32 h3cDot11APCPUAvgUsage | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.3 | Integer32 | read-only | Represents the CPU average usage for AP. |
| I32 h3cDot11APMemRTUsage | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.4 | Integer32 | read-only | Represents the memory real time usage for AP. |
| I32 h3cDot11APMemAvgUsage | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.5 | Integer32 | read-only | Represents the average memory usage for AP. |
| IP h3cDot11APIPAddressGateway | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.6 | IpAddress | read-only | Represents the IP address gateway for AP. |
| INT h3cDot11APACAssociateStatus | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.7 | INTEGER | read-only | Represents associate status of AP and AC. |
| OCT h3cDot11APManuBuildInfo | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.8 | OCTET STRING | read-only | Represents the device version information for AP. |
| U32 h3cDot11APFlashFreeSize | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.9 | Unsigned32 | read-only | Represents the free size of AP flash card. |
| INT h3cDot11APTemperature | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.10 | INTEGER | read-only | Represents the device temperature information for AP. |
| h3cDot11APIdleListTable | 1.3.6.1.4.1.2011.10.2.75.2.1.9 | not-accessible | This table provides the list of idle AP. | |
| h3cDot11APIdleListEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.9.1 | not-accessible | Each entry provides information of a idle AP. | |
| OCT h3cDot11APIdleTemplateName | 1.3.6.1.4.1.2011.10.2.75.2.1.9.1.1 | OCTET STRING | not-accessible | Represents the name of idle AP template. |
| OCT h3cDot11APIdleSerialID | 1.3.6.1.4.1.2011.10.2.75.2.1.9.1.2 | OCTET STRING | read-only | Represents AP serial ID. |
| h3cDot11APSysInfoByAPIDTable | 1.3.6.1.4.1.2011.10.2.75.2.1.10 | not-accessible | The table provides the system information of the AP. | |
| h3cDot11APSysInfoByAPIDEntry | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1 | not-accessible | Each entry provides system information of an AP. | |
| TIK h3cDot11APSysUpTime2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.1 | TimeTicks | read-only | Represents how long AP has been powered on. |
| I32 h3cDot11APCPURTUsage2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.2 | Integer32 | read-only | Represents the CPU real time usage for AP. |
| I32 h3cDot11APCPUAvgUsage2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.3 | Integer32 | read-only | Represents the CPU average usage for AP. |
| I32 h3cDot11APMemRTUsage2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.4 | Integer32 | read-only | Represents the memory real time usage for AP. |
| I32 h3cDot11APMemAvgUsage2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.5 | Integer32 | read-only | Represents the average memory usage for AP. |
| IP h3cDot11APIPAddressGateway2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.6 | IpAddress | read-only | Represents the IP address gateway for AP. |
| INT h3cDot11APACAssociateStatus2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.7 | INTEGER | read-only | Represents associate status of AP and AC. |
| OCT h3cDot11APManuBuildInfo2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.8 | OCTET STRING | read-only | Represents the device version information for AP. |
| U32 h3cDot11APFlashFreeSize2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.9 | Unsigned32 | read-only | Represents the free size of AP flash card. |
| I32 h3cDot11APTemperature2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.10 | Integer32 | read-only | Represents the device temperature information for AP. |
| MAC h3cDot11APMacAddress2 | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.11 | MacAddress | read-only | Represents the MAC address of AP. |
| h3cDot11APStatisGroup | 1.3.6.1.4.1.2011.10.2.75.2.2 | |||
| h3cDot11APRxStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.1 | not-accessible | The table will provide the receiving statistic for a specific radio of AP. | |
| h3cDot11APRxStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1 | not-accessible | Each entry of the table will provide the statistic data for each radio of a specific AP. | |
| C32 h3cDot11RxFrameDupCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.1 | Counter32 | read-only | Represents the number of duplicate frames reception. |
| C32 h3cDot11RxFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.2 | Counter32 | read-only | Represents the number of frames reception. |
| C32 h3cDot11RxUcastFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.3 | Counter32 | read-only | Represents the number of unicast frames reception. |
| C32 h3cDot11RxBcastFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.4 | Counter32 | read-only | Represents the number of broadcast frames reception. |
| C32 h3cDot11RxMcastFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.5 | Counter32 | read-only | Represents the number of multicast frames reception. |
| C32 h3cDot11RxDiscardFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.6 | Counter32 | read-only | Represents the number of frames discarded by AP. |
| C32 h3cDot11RxFragCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.7 | Counter32 | read-only | Represents the number of frame fragments reception. |
| C32 h3cDot11RxFcsErrCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.8 | Counter32 | read-only | Represents the number of FCS error frames reception. |
| C32 h3cDot11RxFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.9 | Counter32 | read-only | Represents the bytes of frames reception. |
| C32 h3cDot11RxUcastFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.10 | Counter32 | read-only | Represents the bytes of unicast frames reception. |
| C32 h3cDot11RxBcastFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.11 | Counter32 | read-only | Represents the bytes of broadcast frames reception. |
| C32 h3cDot11RxMcastFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.12 | Counter32 | read-only | Represents the bytes of multicast frames reception. |
| C32 h3cDot11RxDiscardFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.13 | Counter32 | read-only | Represents the bytes of frames discarded by AP. |
| C32 h3cDot11RxMgmtFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.14 | Counter32 | read-only | Represents the number of management frames reception. |
| C32 h3cDot11RxCtrlFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.15 | Counter32 | read-only | Represents the number of control frames reception. |
| C32 h3cDot11RxDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.16 | Counter32 | read-only | Represents the number of data frames reception. |
| C32 h3cDot11RxDecryptErrorCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.17 | Counter32 | read-only | Represents the number of decryption error. |
| C32 h3cDot11RxAuthenFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.18 | Counter32 | read-only | Represents the number of authentication frame reception. |
| C32 h3cDot11RxAssociateFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.19 | Counter32 | read-only | Represents the number of associate frame reception. |
| I32 h3cDot11RxFrameErrorRatio | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.20 | Integer32 | read-only | Represents the ratio of error frame. |
| C32 h3cDot11RxPhyErrorCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.21 | Counter32 | read-only | Represents the number of physical reception error. |
| C32 h3cDot11RxMICErrorCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.22 | Counter32 | read-only | Represents the number of MIC verification error. |
| C32 h3cDot11RxDataFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.23 | Counter32 | read-only | Represents the bytes of data frames reception. |
| I32 h3cDot11RadioRxAverSnr | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.24 | Integer32 | read-only | Represents the average signal noise rate of this radio. |
| C32 h3cDot11RxPayloadBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.25 | Counter32 | read-only | Represents the payload bytes of data frames reception. |
| I32 h3cDot11RxTrafficSpeed | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.26 | Integer32 | read-only | Represents the bytes of frames reception per second. |
| C64 h3cDot11RxUcastDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.27 | Counter64 | read-only | Represents the number of unicast data frames reception. |
| C64 h3cDot11RxNUcastDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.28 | Counter64 | read-only | Represents the number of non-unicast data frames reception. |
| C64 h3cDot11RxTotalDiscardFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.29 | Counter64 | read-only | Represents the number of total frames discarded by radio. |
| h3cDot11APTxStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.2 | not-accessible | The table will provide the transmission statistic for a specific radio of AP. | |
| h3cDot11APTxStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1 | not-accessible | Each entry of the table will provide the statistic data for each radio of a specific AP. | |
| C32 h3cDot11TxFragCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.1 | Counter32 | read-only | Represents the number of fragmented frames transmission. |
| C32 h3cDot11FailedCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.2 | Counter32 | read-only | Represents the number of transmission failures. |
| C32 h3cDot11RetryCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.3 | Counter32 | read-only | Represents the number of transmit retries. |
| C32 h3cDot11MultiRetryCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.4 | Counter32 | read-only | Represents the number of transmits that required more than one retry. |
| C32 h3cDot11RtsSuccessCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.5 | Counter32 | read-only | Represents the number of successful RTS (Request to send) transmission. |
| C32 h3cDot11RtsFailCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.6 | Counter32 | read-only | Represents the number of RTS transmission failures. |
| C32 h3cDot11AckFailCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.7 | Counter32 | read-only | Represents the number of acknowledgement failures. |
| C32 h3cDot11TxFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.8 | Counter32 | read-only | Represents the total number of frames transmission. |
| C32 h3cDot11TxUcastFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.9 | Counter32 | read-only | Represents the number of unicast frames transmission. |
| C32 h3cDot11TxBcastFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.10 | Counter32 | read-only | Represents the number of broadcast frames transmission. |
| C32 h3cDot11TxMcastFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.11 | Counter32 | read-only | Represents the number of multicast frames transmission. |
| C32 h3cDot11TxDiscardFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.12 | Counter32 | read-only | Represents the number of frames discarded by AP. |
| C32 h3cDot11TxFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.13 | Counter32 | read-only | Represents the total bytes of frames transmission. |
| C32 h3cDot11TxUcastFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.14 | Counter32 | read-only | Represents the bytes of unicast frames transmission. |
| C32 h3cDot11TxBcastFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.15 | Counter32 | read-only | Represents the bytes of broadcast frames transmission. |
| C32 h3cDot11TxMcastFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.16 | Counter32 | read-only | Represents the bytes of multicast frames transmission. |
| C32 h3cDot11TxDiscardFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.17 | Counter32 | read-only | Represents the bytes of multicast frames transmission. |
| C32 h3cDot11TxAuthenFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.18 | Counter32 | read-only | Represents the number of authentication frame transmission. |
| C32 h3cDot11TxAssociateFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.19 | Counter32 | read-only | Represents the number of associate frame transmission. |
| I32 h3cDot11TxFrameRetryRatio | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.20 | Integer32 | read-only | Represents the ratio of retry frame. |
| C32 h3cDot11TxDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.21 | Counter32 | read-only | Represents the number of data frame transmission. |
| C32 h3cDot11TxDataFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.22 | Counter32 | read-only | Represents the bytes of data frame transmission. |
| C32 h3cDot11TxMSDUCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.23 | Counter32 | read-only | Represents the total number of MSDU transmission. |
| C32 h3cDot11TxDiscardMSDUCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.24 | Counter32 | read-only | Represents the number of discarded MSDU transmission. |
| C32 h3cDot11RetryMSDUCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.25 | Counter32 | read-only | Represents the number of retransfer MSDU. |
| C32 h3cDot11TxPayloadBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.26 | Counter32 | read-only | Represents the payload bytes of data frames transmission. |
| I32 h3cDot11TxTrafficSpeed | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.27 | Integer32 | read-only | Represents the bytes of frames transmission per second. |
| I32 h3cDot11TxErrFrameRatio | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.28 | Integer32 | read-only | Represents the ratio of error frame. |
| I32 h3cDot11TxFrameRate | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.29 | Integer32 | read-only | Represents the count of frames transmission per second. |
| C32 h3cDot11TxMgtFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.30 | Counter32 | read-only | Represents the number of transmitted management frames. |
| C32 h3cDot11TxCtrlFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.31 | Counter32 | read-only | Represents the number of transmission control frames. |
| C32 h3cDot11TxMACErrCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.32 | Counter32 | read-only | Represents the count of MAC error frame. |
| C32 h3cDot11TxErrFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.33 | Counter32 | read-only | Represents the count of error frame. |
| C64 h3cDot11TxUcastDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.34 | Counter64 | read-only | Represents the number of unicast data frames transmission. |
| C64 h3cDot11TxNUcastDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.35 | Counter64 | read-only | Represents the number of non-unicast data frames transmission. |
| h3cDot11APAssocStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.3 | not-accessible | The table will provide the station association statistic for AP. | |
| h3cDot11APAssocStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1 | not-accessible | Each entry of the table will provide the statistic data of station association for AP. | |
| C32 h3cDot11ApStationAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.1 | Counter32 | read-only | Represents the total number of station association with this AP. |
| C32 h3cDot11ApStationAssocFailSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.2 | Counter32 | read-only | Represents the total number of station association failure with this AP. |
| C32 h3cDot11ApStationReassocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.3 | Counter32 | read-only | Represents the total number of station reassociation with this AP. |
| C32 h3cDot11ApStationAssocRejectSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.4 | Counter32 | read-only | Represents the total number of station association rejected on account of resource limit with this AP. |
| C32 h3cDot11ApStationExDeAuthenSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.5 | Counter32 | read-only | Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this AP. |
| I32 h3cDot11ApStationCurAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.6 | Integer32 | read-only | Represents the total number of current associated stations with this AP. |
| I32 h3cDot11ApStaCurAuthSuccSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.7 | Integer32 | read-only | Represents the successful number of station authentication with this AP. |
| C32 h3cDot11AllStationUpSumTime | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.8 | Counter32 | read-only | Represents the sum of duration of all stations which associate with this AP. |
| C32 h3cDot11ApStationAssocReqSum | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.9 | Counter32 | read-only | Represents the number of station association request with this AP. |
| TIK h3cDot11AllStationUpSumTimeTicks | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.10 | TimeTicks | read-only | Represents the sum of duration of all stations which associate with this AP. |
| h3cDot11BSSRxStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.4 | not-accessible | The table will provide the reception statistic for a specific BSS on a radio. | |
| h3cDot11BSSRxStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1 | not-accessible | Each entry of the table will provide the statistic data for each BSS on a specific radio. | |
| C32 h3cDot11BSSRxFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.1 | Counter32 | read-only | Represents the number of frames reception with this BSS. |
| C32 h3cDot11BSSRxFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.2 | Counter32 | read-only | Represents the bytes of frames reception with this BSS. |
| C32 h3cDot11BSSRxDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.3 | Counter32 | read-only | Represents the number of data frames reception with this BSS. |
| C32 h3cDot11BSSRxDataFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.4 | Counter32 | read-only | Represents the bytes of data frames reception with this BSS. |
| C32 h3cDot11BSSRxAssociateFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.5 | Counter32 | read-only | Represents the number of associate frames reception with this BSS. |
| I32 h3cDot11BSSRxFrameErrorRatio | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.6 | Integer32 | read-only | Represents the ratio of error frames reception with this BSS. |
| C32 h3cDot11BSSRxPayloadBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.7 | Counter32 | read-only | Represents the payload bytes of data frames reception with this BSS. |
| C32 h3cDot11BSSRxUniFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.8 | Counter32 | read-only | Represents the count of unicast frames received. |
| I32 h3cDot11BSSRxNonUniFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.9 | Integer32 | read-only | Represents the count of non-unicast frames received. |
| C32 h3cDot11BSSRxAuthenFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.10 | Counter32 | read-only | Represents the count of authentication frames received. |
| h3cDot11BSSTxStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.5 | not-accessible | The table will provide the transmission statistic for a specific BSS on a radio. | |
| h3cDot11BSSTxStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1 | not-accessible | Each entry of the table will provide the statistic data for each BSS on a specific radio. | |
| C32 h3cDot11BSSTxFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.1 | Counter32 | read-only | Represents the total number of frames transmission with this BSS. |
| C32 h3cDot11BSSTxFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.2 | Counter32 | read-only | Represents the total number of bytes transmission with this BSS. |
| C32 h3cDot11BSSTxDataFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.3 | Counter32 | read-only | Represents the number of data frame transmission with this BSS. |
| C32 h3cDot11BSSTxDataFrameBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.4 | Counter32 | read-only | Represents the bytes of data frame transmission with this BSS. |
| C32 h3cDot11BSSTxAssociateFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.5 | Counter32 | read-only | Represents the number of associate frame transmission with this BSS. |
| C32 h3cDot11BSSTxPayloadBytes | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.6 | Counter32 | read-only | Represents the payload bytes of data frame transmission with this BSS. |
| C32 h3cDot11BSSTxRetryCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.7 | Counter32 | read-only | Represents the count of bytes retransmitted with this BSS. |
| C32 h3cDot11BSSTxUniFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.8 | Counter32 | read-only | Represents the count of unicast frames transmission with this BSS. |
| I32 h3cDot11BSSTxNonUniFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.9 | Integer32 | read-only | Represents the number of non-unicast frames transmission with this BSS. |
| C32 h3cDot11BSSTxAuthenFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.10 | Counter32 | read-only | Represents the count of authentication frames transmission with this BSS. |
| h3cDot11BSSAssocStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.6 | not-accessible | The table will provide the station association statistic for BSS. | |
| h3cDot11BSSAssocStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1 | not-accessible | Each entry of the table will provide the statistic data of station association for BSS. | |
| C32 h3cDot11BSSStationAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.1 | Counter32 | read-only | Represents the total number of station association with this BSS. |
| C32 h3cDot11BSSStationAssocFailSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.2 | Counter32 | read-only | Represents the total number of station association failure with this BSS. |
| C32 h3cDot11BSSStationReassocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.3 | Counter32 | read-only | Represents the total number of station reassociation with this BSS. |
| C32 h3cDot11BSSStationAssocRejectSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.4 | Counter32 | read-only | Represents the total number of station association rejected on account of resource limit with this BSS. |
| C32 h3cDot11BSSStationExDeAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.5 | Counter32 | read-only | Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this BSS. |
| I32 h3cDot11BSSStationCurAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.6 | Integer32 | read-only | Represents the total number of current associated stations with this BSS. |
| C32 h3cDot11BSSStationAssocReqSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.7 | Counter32 | read-only | Represents the total number of station association request with this BSS. |
| I32 h3cDot11BSSStationCurAuthSum | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.8 | Integer32 | read-only | Represents the total number of current associated stations which have passed portal or 1x authentication with this BSS. |
| h3cDot11APLinkStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.7 | not-accessible | The table will provide the link statistic for AP. | |
| h3cDot11APLinkStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.7.1 | not-accessible | Each entry provides the link statistic of the AP. | |
| C32 h3cDot11UpLinkUpDownTimes | 1.3.6.1.4.1.2011.10.2.75.2.2.7.1.1 | Counter32 | read-only | Represents up/down times of uplink interface of the AP. |
| C32 h3cDot11DownLinkUpDownTimes | 1.3.6.1.4.1.2011.10.2.75.2.2.7.1.2 | Counter32 | read-only | Represents up/down times of downlink interface of the AP. |
| h3cDot11RadioAssocStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.8 | not-accessible | The table will provide the station association statistic for radio. | |
| h3cDot11RadioAssocStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1 | not-accessible | Each entry of the table will provide the statistic data of station association for radio. | |
| C32 h3cDot11RadioStaAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.1 | Counter32 | read-only | Represents the total number of station association with this radio. |
| C32 h3cDot11RadioStaAssocFailSum | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.2 | Counter32 | read-only | Represents the total number of station association failure with this radio. |
| C32 h3cDot11RadioStaReassocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.3 | Counter32 | read-only | Represents the total number of station re-association with this radio. |
| C32 h3cDot11RadioStaAssocRejectSum | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.4 | Counter32 | read-only | Represents the total number of station association rejected on account of resource limit with this radio. |
| C32 h3cDot11RadioStaExDeAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.5 | Counter32 | read-only | Represents the total number of exceptional station de-authentication (Without sending a de-authentication to AP) with this radio. |
| I32 h3cDot11RadioStaCurAssocSum | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.6 | Integer32 | read-only | Represents the total number of current associated stations with this radio. |
| h3cDot11RadioMngFrameStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.9 | not-accessible | The table will provide the management frame statistic for this radio. | |
| h3cDot11RadioMngFrameStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1 | not-accessible | Each entry of the table will provide the management frame statistic for this radio. | |
| H3C h3cDot11RadioStatisIndex | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1.1 | H3cDot11RadioElementIndex | not-accessible | Represents index of radio. |
| INT h3cDot11MngFrameType | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1.2 | INTEGER | not-accessible | Represents the type of the management frame on this radio. |
| C32 h3cDot11MngFrameCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1.3 | Counter32 | read-only | Represents the total number of each type for management frame on this radio. |
| h3cDot11APAuthFailStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.10 | not-accessible | The table will provide the authentication failure statistic for this AP. | |
| h3cDot11APAuthFailStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.10.1 | not-accessible | Each entry of the table will provide the authentication failure statistic for this AP. | |
| INT h3cDot11APAuthFailStatisType | 1.3.6.1.4.1.2011.10.2.75.2.2.10.1.1 | INTEGER | not-accessible | Represents the type of authentication failure with this AP. |
| C32 h3cDot11APAuthFailStatisCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.10.1.2 | Counter32 | read-only | Represents the total number of each type for authentication failure on this AP. |
| h3cDot11APAssocFailStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.11 | not-accessible | The table will provide the association failure statistic for this AP. | |
| h3cDot11APAssocFailStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.11.1 | not-accessible | Each entry of the table will provide the association failure statistic for this AP. | |
| INT h3cDot11APAssocFailStatisType | 1.3.6.1.4.1.2011.10.2.75.2.2.11.1.1 | INTEGER | not-accessible | Represents the type of association failure with this AP. |
| C32 h3cDot11APAssocFailStatisCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.11.1.2 | Counter32 | read-only | Represents the total number of each type for association failure on this AP. |
| h3cDot11APReassocStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.12 | not-accessible | The table will provide the re-association statistic for this AP. | |
| h3cDot11APReassocStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.12.1 | not-accessible | Each entry of the table will provide the re-association statistic for this AP. | |
| INT h3cDot11APReassocStatisType | 1.3.6.1.4.1.2011.10.2.75.2.2.12.1.1 | INTEGER | not-accessible | Represents the type of re-association with this AP. |
| C32 h3cDot11APReassocStatisCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.12.1.2 | Counter32 | read-only | Represents the total number of each type for re-association with this AP. |
| h3cDot11APUserAuthStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.13 | not-accessible | The table will provide the user authentication statistic for this AP. | |
| h3cDot11APUserAuthStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.13.1 | not-accessible | Each entry of the table will provide the user authentication statistic for this AP. | |
| INT h3cDot11UserAuthStatisType | 1.3.6.1.4.1.2011.10.2.75.2.2.13.1.1 | INTEGER | not-accessible | Represents the type of user authentication with this AP. |
| C32 h3cDot11UserAuthStatisCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.13.1.2 | Counter32 | read-only | Represents the total number of each type for user authentication with this AP. |
| h3cDot11APDeauthStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.14 | not-accessible | The table will provide the de-authentication statistic for this AP. | |
| h3cDot11APDeauthStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.14.1 | not-accessible | Each entry of the table will provide the de-authentication statistic for this AP. | |
| INT h3cDot11APDeauthStatisType | 1.3.6.1.4.1.2011.10.2.75.2.2.14.1.1 | INTEGER | not-accessible | Represents the type of de-authentication for this AP. |
| C32 h3cDot11APDeauthStatisCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.14.1.2 | Counter32 | read-only | Represents the total number of each type for de-authentication with this AP. |
| h3cDot11APDeassocStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.15 | not-accessible | The table will provide the de-association statistic for this AP. | |
| h3cDot11APDeassocStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.15.1 | not-accessible | Each entry of the table will provide the de-association statistic for this AP. | |
| INT h3cDot11APDeassocStatisType | 1.3.6.1.4.1.2011.10.2.75.2.2.15.1.1 | INTEGER | not-accessible | Represents the type of de-association with this AP. |
| C32 h3cDot11APDeassocStatisCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.15.1.2 | Counter32 | read-only | Represents the total number of each type for de-association with this AP. |
| h3cDot11APAssocFailStatis2Table | 1.3.6.1.4.1.2011.10.2.75.2.2.16 | not-accessible | This table will provide statistic of association fails for each ap. | |
| h3cDot11APAssocFailStatis2Entry | 1.3.6.1.4.1.2011.10.2.75.2.2.16.1 | not-accessible | Each entry will provide statistic of association fails for this ap. | |
| INT h3cDot11APAssocFailStatis2Type | 1.3.6.1.4.1.2011.10.2.75.2.2.16.1.1 | INTEGER | not-accessible | Represents the type of association fails for this AP |
| C32 h3cDot11APAssocFailStatis2Cnt | 1.3.6.1.4.1.2011.10.2.75.2.2.16.1.2 | Counter32 | read-only | Represents the total count of association fails for this AP. |
| h3cDot11APIfStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.17 | not-accessible | The table will provide the statistics on the interface of the AP. | |
| h3cDot11APIfStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1 | not-accessible | Each entry of the table will provide statistics on the interface of the AP. | |
| C32 h3cDot11APIfInPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.1 | Counter32 | read-only | Represents the total number of packets received on the interface. |
| C32 h3cDot11APIfInNormalPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.2 | Counter32 | read-only | Represents the total number of correct packets received on the interface. |
| C32 h3cDot11APIfInErrorPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.3 | Counter32 | read-only | Represents the total number of error packets received on the interface. |
| C32 h3cDot11APIfOutPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.4 | Counter32 | read-only | Represents the total number of packets sent from the interface. |
| C32 h3cDot11APIfInOctets | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.5 | Counter32 | read-only | Represents the total number of octets received on the interface. |
| C32 h3cDot11APIfOutOctets | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.6 | Counter32 | read-only | Represents the total number of octets sent from the interface. |
| U32 h3cDot11APIfFlowOut | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.7 | Unsigned32 | read-only | Represents the traffic rate (byte/s) on the uplink interface during a sampling period. |
| U32 h3cDot11APIfFlowIN | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.8 | Unsigned32 | read-only | Represents the traffic rate (byte/s) on the downlink interface during a sampling period. |
| C32 h3cDot11APIfInUcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.9 | Counter32 | read-only | Represents the number of unicast packets received on the interface. |
| C32 h3cDot11APIfInNUcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.10 | Counter32 | read-only | Represents the number of non-unicast packets received on the wired interface. |
| C32 h3cDot11APIfInDiscardPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.11 | Counter32 | read-only | Represents the number of unicast packets discarded on the interface. |
| C32 h3cDot11APIfOutUcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.12 | Counter32 | read-only | Represents the number of unicast packets send on the interface. |
| C32 h3cDot11APIfOutNUcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.13 | Counter32 | read-only | Represents the number of non-unicast packets send on the interface. |
| C32 h3cDot11APIfOutDiscardPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.14 | Counter32 | read-only | Represents the number of discarded packets send on the interface. |
| C32 h3cDot11APIfOutErrorPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.15 | Counter32 | read-only | Represents the number of error packets send on the interface. |
| C32 h3cDot11APIfUpdownTimes | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.16 | Counter32 | read-only | Represents the up/down times on the interface. |
| TIK h3cDot11APIfStatusKeepTime | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.17 | TimeTicks | read-only | Represents the last change time on the interface. |
| INT h3cDot11APIfOperStatus | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.18 | INTEGER | read-only | Represents the operational state of the interface. |
| C64 h3cDot11APIfInBrdcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.19 | Counter64 | read-only | Represents the number of broadcast packets received on the interface. |
| C64 h3cDot11APIfOutBrdcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.20 | Counter64 | read-only | Represents the number of broadcast packets sent on the interface. |
| C64 h3cDot11APIfInMulcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.21 | Counter64 | read-only | Represents the number of multicast packets received on the interface. |
| C64 h3cDot11APIfOutMulcastPkts | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.22 | Counter64 | read-only | Represents the number of multicast packets sent on the interface. |
| C64 h3cDot11APIfInPayloadOctets | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.23 | Counter64 | read-only | Represents the number of actual octets received on the interface. |
| C64 h3cDot11APIfOutPayloadOctets | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.24 | Counter64 | read-only | Represents the number of actual octets sent on the interface. |
| h3cDot11RadioMngFrmStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.18 | not-accessible | The table will provide the management frame statistic of this radio. | |
| h3cDot11RadioMngFrmStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.18.1 | not-accessible | Each entry of the table will provide the management frame statistic of this radio. | |
| INT h3cDot11MngFrmType | 1.3.6.1.4.1.2011.10.2.75.2.2.18.1.1 | INTEGER | not-accessible | Represents the type of the management frame on this radio. |
| C32 h3cDot11MngFrmCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.18.1.2 | Counter32 | read-only | Represents the total number of each type of management frame on this radio. |
| h3cDot11APPacketSizeStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.19 | not-accessible | This table provides packets statistic base on size. | |
| h3cDot11APPacketSizeStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1 | not-accessible | Each entry provides packets statistic base on size for each radio of a specific AP. | |
| INT h3cDot11APPacketSize | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1.1 | INTEGER | not-accessible | This node represents packet size: sizeLevel1 : size 1024 |
| C64 h3cDot11APRXPacketSizeCount | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1.2 | Counter64 | read-only | Represents the count of packets reception base on frame size. |
| C64 h3cDot11APTXPacketSizeCount | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1.3 | Counter64 | read-only | Represents the count of packets transmission base on frame size. |
| h3cDot11APPacketRateStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.20 | not-accessible | This table provides packets statistic base on rate. | |
| h3cDot11APPacketRateStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1 | not-accessible | Each entry provides packets statistic base on rate for each radio of a specific AP. | |
| I32 h3cDot11APPacketRate | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1.1 | Integer32 | not-accessible | Represents transmit data rate(twice as actual rate). |
| C64 h3cDot11APRXPacketRateCount | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1.2 | Counter64 | read-only | Represents the count of packets reception base on transmit data rate. |
| C64 h3cDot11APTXPacketRateCount | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1.3 | Counter64 | read-only | Represents the count of packets transmission base on transmit data rate. |
| h3cDot11APPacketMCSRateStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.21 | not-accessible | This table provides packets statistic base on MCS rate. | |
| h3cDot11APPacketMCSRateStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1 | not-accessible | Each entry provides packets statistic base on MCS rate for each radio of a specific AP. | |
| I32 h3cDot11APPacketMCSRate | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1.1 | Integer32 | not-accessible | Represents transmit data rate(twice as actual rate). |
| C64 h3cDot11APRXPacketMCSRateCount | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1.2 | Counter64 | read-only | Represents the count of packets reception base on transmit data rate. |
| C64 h3cDot11APTXPacketMCSRateCount | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1.3 | Counter64 | read-only | Represents the count of packets transmission base on transmit data rate. |
| h3cDot11APAssocFailStatis3Table | 1.3.6.1.4.1.2011.10.2.75.2.2.22 | not-accessible | This table will provide statistic of association fails for each AP. | |
| h3cDot11APAssocFailStatis3Entry | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1 | not-accessible | Each entry will provide statistic of association failure with this AP because of different reasons. | |
| C32 h3cDot11APAssocFailStatis3SRCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.1 | Counter32 | read-only | This object represents the count of association failure because of lack of resource. |
| C32 h3cDot11APAssocFailStatis3NSRCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.2 | Counter32 | read-only | This object represents the count of association failure because of not support rate set. |
| C32 h3cDot11APAssocFailStatis3URCCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.3 | Counter32 | read-only | This object represents the count of association failure because of unknown reason code. |
| C32 h3cDot11APAssocFailStatis3RFCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.4 | Counter32 | read-only | This object represents the count of association failure because of re-associate failed. |
| C32 h3cDot11APAssocFailStatis3OtherCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.5 | Counter32 | read-only | This object represents the count of association fails because of reason not in 802.11 the protocol. |
| h3cDot11APIfStatisByAPIDTable | 1.3.6.1.4.1.2011.10.2.75.2.2.23 | not-accessible | The table will provide the statistics on the interface of the AP. | |
| h3cDot11APIfStatisByAPIDEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1 | not-accessible | Each entry of the table will provide statistics on the interface of the AP. | |
| C64 h3cDot11APIfInPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.1 | Counter64 | read-only | Represents the total number of packets received on the interface. |
| C64 h3cDot11APIfInNormalPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.2 | Counter64 | read-only | Represents the total number of correct packets received on the interface. |
| C64 h3cDot11APIfInErrorPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.3 | Counter64 | read-only | Represents the total number of error packets received on the interface. |
| C64 h3cDot11APIfOutPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.4 | Counter64 | read-only | Represents the total number of packets sent from the interface. |
| C64 h3cDot11APIfInOctets2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.5 | Counter64 | read-only | Represents the total number of octets received on the interface. |
| C64 h3cDot11APIfOutOctets2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.6 | Counter64 | read-only | Represents the total number of octets sent from the interface. |
| U32 h3cDot11APIfFlowOut2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.7 | Unsigned32 | read-only | Represents the traffic rate (byte/s) on the uplink interface during a sampling period. |
| U32 h3cDot11APIfFlowIN2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.8 | Unsigned32 | read-only | Represents the traffic rate (byte/s) on the downlink interface during a sampling period. |
| C64 h3cDot11APIfInUcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.9 | Counter64 | read-only | Represents the number of unicast packets received on the interface. |
| C64 h3cDot11APIfInNUcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.10 | Counter64 | read-only | Represents the number of non-unicast packets received on the wired interface. |
| C64 h3cDot11APIfInDiscardPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.11 | Counter64 | read-only | Represents the number of unicast packets discarded on the interface. |
| C64 h3cDot11APIfOutUcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.12 | Counter64 | read-only | Represents the number of unicast packets send on the interface. |
| C64 h3cDot11APIfOutNUcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.13 | Counter64 | read-only | Represents the number of non-unicast packets send on the interface. |
| C64 h3cDot11APIfOutDiscardPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.14 | Counter64 | read-only | Represents the number of discarded packets send on the interface. |
| C64 h3cDot11APIfOutErrorPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.15 | Counter64 | read-only | Represents the number of error packets send on the interface. |
| C32 h3cDot11APIfUpdownTimes2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.16 | Counter32 | read-only | Represents the up/down times on the interface. |
| TIK h3cDot11APIfStatusKeepTime2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.17 | TimeTicks | read-only | Represents the last change time on the interface. |
| INT h3cDot11APIfOperStatus2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.18 | INTEGER | read-only | Represents the operational state of the interface. |
| C64 h3cDot11APIfInBrdcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.19 | Counter64 | read-only | Represents the number of broadcast packets received on the interface. |
| C64 h3cDot11APIfOutBrdcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.20 | Counter64 | read-only | Represents the number of broadcast packets sent on the interface. |
| C64 h3cDot11APIfInMulcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.21 | Counter64 | read-only | Represents the number of multicast packets received on the interface. |
| C64 h3cDot11APIfOutMulcastPkts2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.22 | Counter64 | read-only | Represents the number of multicast packets sent on the interface. |
| C64 h3cDot11APIfInPayloadOctets2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.23 | Counter64 | read-only | Represents the number of actual octets received on the interface. |
| C64 h3cDot11APIfOutPayloadOctets2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.24 | Counter64 | read-only | Represents the number of actual octets sent on the interface. |
| C64 h3cDot11APIfInDataOctets2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.25 | Counter64 | read-only | Represents the number of actual data octets received on the interface. |
| C64 h3cDot11APIfOutDataOctets2 | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.26 | Counter64 | read-only | Represents the number of actual data octets sent on the interface. |
| h3cDot11APUserSecAuthStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.24 | not-accessible | The table will provide the user authentication statistic for this AP. | |
| h3cDot11APUserSecAuthStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1 | not-accessible | Each entry of the table will provide the user authentication statistic for this AP. | |
| I32 h3cDot11APUserAuthCurNumber | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.1 | Integer32 | read-only | Represents the current number of user authenticated with this AP. |
| C32 h3cDot11APUserConnFailCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.2 | Counter32 | read-only | Represents the total number of user disconnected with this AP. |
| C32 h3cDot11APUserAuthReqCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.3 | Counter32 | read-only | Represents the total number of user authenticate request with this AP. |
| C32 h3cDot11APUserAuthSuccCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.4 | Counter32 | read-only | Represents the total number of user authenticated successed with this AP. |
| C32 h3cDot11APUserAuthFailCnt | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.5 | Counter32 | read-only | Represents the total number of user authenticated failed with this AP. |
| h3cDot11APUserInfoStatisTable | 1.3.6.1.4.1.2011.10.2.75.2.2.25 | not-accessible | The table will provide the user information statistic of this AP. | |
| h3cDot11APUserInfoStatisEntry | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1 | not-accessible | Each entry of the table will provide the user information statistic of this AP. | |
| MAC h3cDot11APUserMacAddr | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.1 | MacAddress | not-accessible | Represents the mac address of user logging in this AP. |
| IP h3cDot11APUserIpAddr | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.2 | IpAddress | read-only | Represents the ip address of user logging in this AP. |
| OCT h3cDot11APUserLoginName | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.3 | OCTET STRING | read-only | Represents the login name of user logging in this AP. |
| OCT h3cDot11APUserLoginTime | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.4 | OCTET STRING | read-only | Represents the login time of user with this AP. |
| TIK h3cDot11APUserOnlineTime | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.5 | TimeTicks | read-only | Represents the online time of user with this AP. |
| h3cDot11APReassocStatis2Table | 1.3.6.1.4.1.2011.10.2.75.2.2.26 | not-accessible | This table will provide statistic of reassociation for each AP. | |
| h3cDot11APReassocStatis2Entry | 1.3.6.1.4.1.2011.10.2.75.2.2.26.1 | not-accessible | Each entry will provide statistic of reassociation with this AP because of different reasons. | |
| C32 h3cDot11APReassocFailStatis2Cnt | 1.3.6.1.4.1.2011.10.2.75.2.2.26.1.1 | Counter32 | read-only | This object represents the count of reassociation failure because of lack of resource. |
| h3cDot11APMtNotifyGroup | 1.3.6.1.4.1.2011.10.2.75.2.3 | |||
| h3cDot11APMtTraps | 1.3.6.1.4.1.2011.10.2.75.2.3.0 | |||
| NTF h3cDot11APMtWorkModeChgTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.1 | The notification will be sent when AP changes the work mode, and h3cDot11APWorkMode suggests which work mode will be used by AP. | ||
| NTF h3cDot11APMtCfgErrorTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.2 | The notification will represent errors caused by the configuration operation of AP. | ||
| NTF h3cDot11APMtRadioFailTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.3 | The notification will notify which the operational status of radio becomes down. | ||
| NTF h3cDot11APMtRadioFailRecoverTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.4 | The notification will notify the operational status of which radio becomes up again. | ||
| NTF h3cDot11APMtRdoChanlChgTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.5 | The notification will represent which radio changes the channel. | ||
| NTF h3cDot11APMtTimeSynFail | 1.3.6.1.4.1.2011.10.2.75.2.3.0.6 | The notification will be sent when AC and AP failed to synchronize their time. | ||
| NTF h3cDot11APMtChlIntfDetected | 1.3.6.1.4.1.2011.10.2.75.2.3.0.7 | The notification will be sent when some ambient device interferes with current channel. | ||
| NTF h3cDot11APMtIntfAPDetected | 1.3.6.1.4.1.2011.10.2.75.2.3.0.8 | The notification will be sent when some ambient AP interferes with current channel. | ||
| NTF h3cDot11APMtIntfStaDetected | 1.3.6.1.4.1.2011.10.2.75.2.3.0.9 | The notification will be sent when some ambient station interferes with current channel. | ||
| NTF h3cDot11APMtIPChange | 1.3.6.1.4.1.2011.10.2.75.2.3.0.10 | The notification will be sent when IP address of the AP changes. | ||
| NTF h3cDot11APFlashWriteFailure | 1.3.6.1.4.1.2011.10.2.75.2.3.0.11 | The notification will be sent when AP failed to write data into flash. | ||
| NTF h3cDot11APSysReboot | 1.3.6.1.4.1.2011.10.2.75.2.3.0.12 | The notification will be sent when AP reboots. | ||
| NTF h3cDot11APMtAvailChlTooLow | 1.3.6.1.4.1.2011.10.2.75.2.3.0.13 | The notification will be sent when number of available channels is too low. | ||
| NTF h3cDot11APImgDwldSuccess | 1.3.6.1.4.1.2011.10.2.75.2.3.0.14 | The notification will be sent when AP succeeds to download image from AC. | ||
| NTF h3cDot11APInterfDetectedTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.15 | This notification will be sent when some ambient AP interferes with current channel. | ||
| NTF h3cDot11APInterfClearTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.16 | This notification will be sent when interference caused by ambient APs on the current channel disappears. | ||
| NTF h3cDot11StaInterfDetectedTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.17 | This notification will be sent when interference caused by ambient STAs on the current channel disappears. | ||
| NTF h3cDot11StaInterfClearTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.18 | This notification will be sent when interference caused by ambient devices on the current channel happens. | ||
| NTF h3cDot11OtherDevIntDetectedTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.19 | This notification will be sent when interference caused by ambient devices on the current channel disappears. | ||
| NTF h3cDot11OtherDevIntClearTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.20 | This notification will be sent when previous ambient device disappeared with the same channel. | ||
| NTF h3cDot11APModuleTroubleTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.21 | This notification will be sent when WLAN module failed. | ||
| NTF h3cDot11APModuleTroubleClearTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.22 | The notification will be sent when WLAN module recovered. | ||
| NTF h3cDot11APRadioDownTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.23 | This notification will be sent when WLAN links interrupted. | ||
| NTF h3cDot11APRadioDownRecovTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.24 | This notification will be sent when WLAN links recover. | ||
| NTF h3cDot11APStaFullTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.25 | This notification will be sent when STA number reach limit number. | ||
| NTF h3cDot11APStaFullRecoverTrap | 1.3.6.1.4.1.2011.10.2.75.2.3.0.26 | This notification will be sent when STA number recover enough level. | ||
| NTF h3cDot11DFSFreeCntBelowThrRecov | 1.3.6.1.4.1.2011.10.2.75.2.3.0.27 | This notification will be sent when available channels number recover enough level. | ||
| NTF h3cDot11APCpuUsageHigh | 1.3.6.1.4.1.2011.10.2.75.2.3.0.28 | The notification will be sent when the AP CPU usage exceeds the threshold. | ||
| NTF h3cDot11APCpuUsageHighRecover | 1.3.6.1.4.1.2011.10.2.75.2.3.0.29 | The notification will be sent when the AP CPU usage descends the threshold. | ||
| NTF h3cDot11APMemUsageHigh | 1.3.6.1.4.1.2011.10.2.75.2.3.0.30 | The notification will be sent when the AP memory usage exceeds the threshold. | ||
| NTF h3cDot11APMemUsageHighRecover | 1.3.6.1.4.1.2011.10.2.75.2.3.0.31 | The notification will be sent when the AP memory usage descends the threshold. | ||
| NTF h3cDot11APTrapUserCntExceedThre | 1.3.6.1.4.1.2011.10.2.75.2.3.0.32 | The notification will be sent when the online user counter exceeds the threshold. | ||
| NTF h3cDot11APMtDetectedIntfAP | 1.3.6.1.4.1.2011.10.2.75.2.3.0.33 | This notification will be sent when some ambient AP interferes with current channel. | ||
| NTF h3cDot11APMtDetectedIntfSTA | 1.3.6.1.4.1.2011.10.2.75.2.3.0.34 | This notification will be sent when some ambient STA interferes with current channel. | ||
| NTF h3cDot11APMtDetectedIntfOtherDev | 1.3.6.1.4.1.2011.10.2.75.2.3.0.35 | This notification will be sent when other device interferes with current channel. | ||
| NTF h3cDot11DetcAdjChlIntfAP | 1.3.6.1.4.1.2011.10.2.75.2.3.0.36 | This notification will be sent when some ambient AP interferes with adjacent channel. | ||
| NTF h3cDot11DetcAdjChlIntfAPClear | 1.3.6.1.4.1.2011.10.2.75.2.3.0.37 | This notification will be sent when interference caused by ambient APs on the adjacent channel disappears. | ||
| h3cDot11APMtTrapVarObjects | 1.3.6.1.4.1.2011.10.2.75.2.3.1 | |||
| H3C h3cDot11APMtTrapCfgErrReason | 1.3.6.1.4.1.2011.10.2.75.2.3.1.1 | H3cDot11NotifyReasonType | accessible-for-notify | Represents errors caused by configuration operation. |
| INT h3cDot11APMtTrapRadioFailReason | 1.3.6.1.4.1.2011.10.2.75.2.3.1.2 | INTEGER | accessible-for-notify | Represents errors caused by configuration operation. The following values are supported: config(1) - Configuration error hwerror(2) - Hardware error swerror(3) - Software error radar(4) - Radar Detection unknown(8) - Unknown reason |
| H3C h3cDot11APMtTrapOldChannel | 1.3.6.1.4.1.2011.10.2.75.2.3.1.3 | H3cDot11ChannelScopeType | accessible-for-notify | Represents which channel the radio used to use. |
| H3C h3cDot11APMtTrapNewChannel | 1.3.6.1.4.1.2011.10.2.75.2.3.1.4 | H3cDot11ChannelScopeType | accessible-for-notify | Represents which channel the radio will use. |
| H3C h3cDot11APChannelChgMode | 1.3.6.1.4.1.2011.10.2.75.2.3.1.5 | H3cDot11RFModeType | accessible-for-notify | Represents the channel change mode for a radio. |
| INT h3cDot11APChgWorkMode | 1.3.6.1.4.1.2011.10.2.75.2.3.1.6 | INTEGER | accessible-for-notify | Represents what work mode for AP. The following values are supported: normal(1) - AP will supply WLAN service. monitor(2) - AP will be a monitor to detect attack. hybrid(3) - AP will supply WLAN service and detect attack. |
| MAC h3cDot11APIntfDevMACAddress | 1.3.6.1.4.1.2011.10.2.75.2.3.1.7 | MacAddress | accessible-for-notify | Represents MAC address of the device which triggers the notification. |
| IP h3cDot11APMtTrapOldIPAddr | 1.3.6.1.4.1.2011.10.2.75.2.3.1.8 | IpAddress | accessible-for-notify | Represents the IP address of AP. |
| I32 h3cDot11CurrInterfDetectedNum | 1.3.6.1.4.1.2011.10.2.75.2.3.1.9 | Integer32 | accessible-for-notify | Represents the number of interfere detected. |
| INT h3cDot11StaFullReason | 1.3.6.1.4.1.2011.10.2.75.2.3.1.10 | INTEGER | accessible-for-notify | Reports which kind maximum number of STA is reached. New STA is not able to associate. |
| I32 h3cDot11StaLimitNumber | 1.3.6.1.4.1.2011.10.2.75.2.3.1.11 | Integer32 | accessible-for-notify | Represents the limit number of STA. |
| INT h3cDot11APRadioDownReason | 1.3.6.1.4.1.2011.10.2.75.2.3.1.12 | INTEGER | accessible-for-notify | Reports the reason why WLAN links is interrupted. |
| OCT h3cDot11InterfMacList | 1.3.6.1.4.1.2011.10.2.75.2.3.1.13 | OCTET STRING | accessible-for-notify | Represents MAC address list of interfere detected. |
| I32 h3cDot11APTrapUserCnt | 1.3.6.1.4.1.2011.10.2.75.2.3.1.14 | Integer32 | accessible-for-notify | Represents the online user counter of AP. |
| I32 h3cDot11APTrapUserThreshold | 1.3.6.1.4.1.2011.10.2.75.2.3.1.15 | Integer32 | accessible-for-notify | Represents threshold of AP's online user counter. |
| I32 h3cDot11APMtChanlChgCount | 1.3.6.1.4.1.2011.10.2.75.2.3.1.16 | Integer32 | accessible-for-notify | Represents how many times that channel changed. |
| OCT h3cDot11APMtFormerApVersion | 1.3.6.1.4.1.2011.10.2.75.2.3.1.17 | OCTET STRING | accessible-for-notify | Represents former software version of AP. |
| H3C h3cDot11APMtAPID | 1.3.6.1.4.1.2011.10.2.75.2.3.1.18 | H3cDot11ObjectIDType | accessible-for-notify | To uniquely identify each AP. |
| H3C h3cDot11APMtRadioID | 1.3.6.1.4.1.2011.10.2.75.2.3.1.19 | H3cDot11RadioScopeType | accessible-for-notify | Represents each radio. |
| H3C h3cDot11APMtChannel | 1.3.6.1.4.1.2011.10.2.75.2.3.1.20 | H3cDot11ChannelScopeType | accessible-for-notify | Represents the current channel allocation for radio. |
| MAC h3cDot11APMtInterfMacAdd | 1.3.6.1.4.1.2011.10.2.75.2.3.1.21 | MacAddress | accessible-for-notify | Represents the MAC address of an AP. |
| H3C h3cDot11APMtAdjChannel | 1.3.6.1.4.1.2011.10.2.75.2.3.1.22 | H3cDot11ChannelScopeType | accessible-for-notify | Represents the adjacent channel of radio. |
RFC description
Manages H3C 802.11 wireless access point performance statistics, radio configurations, and association monitoring.
Start monitoring H3C wireless access point (Fit-AP status, AC-managed) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.