H3C-DOT11-CFG-MIB

All MIBs › H3C-DOT11-CFG-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2010-09-25

Category: Technology: Wireless, Vendor: H3C/HH3C

Description: H3C MIB for 802.11 wireless LAN configuration including SSID, security, and radio parameter settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-DOT11-CFG-MIB?

H3C-DOT11-CFG-MIB is an H3C proprietary MIB configuring 802.11 wireless LAN behavior on H3C wireless access controllers (ACs) and access points (APs). Its objects cover the global regulatory country code, station keep-alive and idle timers, broadcast probe-response behavior, AP scan mode, AC-side control/data tunnel security support flags, and automatic-AP provisioning name settings. As a configuration MIB it lets an administrator confirm regulatory and timer settings match the deployment's requirements and verify tunnel-security support before enabling encrypted CAPWAP-style tunnels. It is deployed on H3C wireless LAN controllers managing a fleet of access points. Engineers can download the H3C-DOT11-CFG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-DOT11-CFG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C wireless LAN controllers (AC) and access points (AP)

Monitoring Examples

An administrator checks h3cDot11GlobalCountryCode to confirm the wireless controller is set to the correct regulatory domain before troubleshooting APs that won't come up on certain channels.

What Can Be Monitored

regulatory country code
station timers
tunnel security support

Imported Objects

From H3C-DOT11-REF-MIB

H3cDot11AuthenType
H3cDot11ChannelScopeType
H3cDot11CirMode
H3cDot11ObjectIDType
H3cDot11PreambleType
H3cDot11RadioElementIndex
H3cDot11RadioScopeType
H3cDot11RadioType
H3cDot11SSIDEncryptModeType
H3cDot11SSIDStringType
H3cDot11SecIEStatusType
H3cDot11ServicePolicyIDType
H3cDot11TunnelSecSchemType
H3cDot11TxPwrLevelScopeType
H3cDot11WorkMode
h3cDot11	MODULE-IDENTITY
h3cDot11APElementIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cDot11CFG	1.3.6.1.4.1.2011.10.2.75.4			This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
h3cDot11GlobeConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.1
OCT h3cDot11GlobalCountryCode	1.3.6.1.4.1.2011.10.2.75.4.1.1	OCTET STRING	read-write	Represents the country code for wireless network.
U32 h3cDot11StaKeepALiveTimerIntvl	1.3.6.1.4.1.2011.10.2.75.4.1.2	Unsigned32	read-write	Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled.
I32 h3cDot11StaIdleTimerIntvl	1.3.6.1.4.1.2011.10.2.75.4.1.3	Integer32	read-write	Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
T/F h3cDot11BroadcastProbeReply	1.3.6.1.4.1.2011.10.2.75.4.1.4	TruthValue	read-write	Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
INT h3cDot11APScanMode	1.3.6.1.4.1.2011.10.2.75.4.1.5	INTEGER	read-write	Represents the scanning mode for AP. The following values are supported: active(1), - AP will actively do scan. passive(2) - AP will passively do scan.
H3C h3cDot11ACCtrlTunnelSecSupport	1.3.6.1.4.1.2011.10.2.75.4.1.6	H3cDot11TunnelSecSchemType	read-write	Represents what security schemes are supported for CAPWAP Control tunnel.
H3C h3cDot11ACDataTunnelSecSupport	1.3.6.1.4.1.2011.10.2.75.4.1.7	H3cDot11TunnelSecSchemType	read-write	Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme.
T/F h3cDot11ACAutoAPSupport	1.3.6.1.4.1.2011.10.2.75.4.1.8	TruthValue	read-write	Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled
OCT h3cDot11AutoAPName	1.3.6.1.4.1.2011.10.2.75.4.1.9	OCTET STRING	read-write	Represents the name of auto AP which need to be made persistent. When read the value from the node, NULL value be returned.
OCT h3cDot11PersistentName	1.3.6.1.4.1.2011.10.2.75.4.1.10	OCTET STRING	read-write	Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned.
I32 h3cDot11IntfTrapThreshold	1.3.6.1.4.1.2011.10.2.75.4.1.11	Integer32	read-write	Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
U32 h3cDot11MonitorInterval	1.3.6.1.4.1.2011.10.2.75.4.1.12	Unsigned32	read-write	Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode.
U32 h3cDot11SampleInterval	1.3.6.1.4.1.2011.10.2.75.4.1.13	Unsigned32	read-write	Represents the sampling interval. Default value 0 : The sampling functionality is disabled.
U32 h3cDot11ChnlSwitChkInterval	1.3.6.1.4.1.2011.10.2.75.4.1.14	Unsigned32	read-write	Represents the checking interval of channel switch.
U32 h3cDot11APUserUplimit	1.3.6.1.4.1.2011.10.2.75.4.1.15	Unsigned32	read-write	Represents the upper limit of user which has access to this AP.
T/F h3cDot11APL2IsolateEnable	1.3.6.1.4.1.2011.10.2.75.4.1.16	TruthValue	read-write	Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled.
I32 h3cDot11APBSSIDSupportNum	1.3.6.1.4.1.2011.10.2.75.4.1.17	Integer32	read-only	Represents the max number of BSSID supported by Current AP.
DAT h3cDot11APLastUpdateStatTime	1.3.6.1.4.1.2011.10.2.75.4.1.18	DateAndTime	read-only	Represents date and time update statistic information lately.
T/F h3cDot11APDoSProtectEnable	1.3.6.1.4.1.2011.10.2.75.4.1.19	TruthValue	read-write	Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled.
U32 h3cDot11MaxAPPerIf	1.3.6.1.4.1.2011.10.2.75.4.1.20	Unsigned32	read-write	Represents max AP number that can be connected to AC interface.
DAT h3cDot11SampleTimeStamp	1.3.6.1.4.1.2011.10.2.75.4.1.21	DateAndTime	read-only	Represents the start time of current sample period.
U32 h3cDot11UplinkTrackId	1.3.6.1.4.1.2011.10.2.75.4.1.22	Unsigned32	read-write	Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled.
T/F h3cDot11RtCollectSwitch	1.3.6.1.4.1.2011.10.2.75.4.1.23	TruthValue	read-write	This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, h3cDot11RtCollectIntvl will take effect. Otherwise, h3cDot11RglCollectIntvl will take effect.
I32 h3cDot11RglCollectIntvl	1.3.6.1.4.1.2011.10.2.75.4.1.24	Integer32	read-write	This object represents interval to regularly collect statistics from AC to AP.
I32 h3cDot11RtCollectIntvl	1.3.6.1.4.1.2011.10.2.75.4.1.25	Integer32	read-write	This object represents interval to collect real-time statistics from AC to AP.
I32 h3cDot11AllAPCpuUsageThreshold	1.3.6.1.4.1.2011.10.2.75.4.1.26	Integer32	read-write	The CPU usage threshold for all AP.
I32 h3cDot11AllAPMemUsageThreshold	1.3.6.1.4.1.2011.10.2.75.4.1.27	Integer32	read-write	The memory usage threshold for all AP.
I32 h3cDot11AdjIntfTrapThreshold	1.3.6.1.4.1.2011.10.2.75.4.1.28	Integer32	read-write	Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
h3cDot11PolicyConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.2
h3cDot11RadioPolicyTable	1.3.6.1.4.1.2011.10.2.75.4.2.1		not-accessible	The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP).
h3cDot11RadioPolicyEntry	1.3.6.1.4.1.2011.10.2.75.4.2.1.1		not-accessible	Each entry contains information of each radio policy.
OCT h3cDot11RadioPolicyName	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.1	OCTET STRING	not-accessible	Represents the name of radio policy.
I32 h3cDot11BeaconInterval	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.2	Integer32	read-create	Represents the interval for Beacon management frame.
I32 h3cDot11DtimInterval	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.3	Integer32	read-create	Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
I32 h3cDot11RtsThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.4	Integer32	read-create	Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
I32 h3cDot11FragThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.5	Integer32	read-create	Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
I32 h3cDot11ShortRetryThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.6	Integer32	read-create	Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to h3cDot11RTSThreshold, that shall be made before a failure condition is indicated.
I32 h3cDot11LongRetryThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.7	Integer32	read-create	Represents the maximum number of transmission attempts of a frame, the length of which is longer than h3cDot11RTSThreshold, that shall be made before a failure condition is indicated.
U32 h3cDot11MaxRxLifetime	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.8	Unsigned32	read-create	Represents the elapsed time. After the time specified by h3cDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
ROW h3cDot11RdoPolicyRowStatus	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.9	RowStatus	read-create	The status of this table entry.
I32 h3cDot11RdoClientMaxCount	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.10	Integer32	read-create	Represent the maximum number of stations supported by this radio policy.
I32 h3cDot11BeaconIntervalMs	1.3.6.1.4.1.2011.10.2.75.4.2.1.1.11	Integer32	read-create	Represents the interval for Beacon management frame.
h3cDot11ServicePolicyTable	1.3.6.1.4.1.2011.10.2.75.4.2.2		not-accessible	The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP).
h3cDot11ServicePolicyEntry	1.3.6.1.4.1.2011.10.2.75.4.2.2.1		not-accessible	Each entry contains information of each service policy.
H3C h3cDot11ServicePolicyID	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.1	H3cDot11ServicePolicyIDType	not-accessible	Represents the ID of each service policy.
STR h3cDot11SSIDName	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.2	H3cDot11SSIDStringType	read-create	Represents the ESS. As per CLI, the value of service policy name will be SSID.
T/F h3cDot11SSIDHidden	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.3	TruthValue	read-create	This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.
H3C h3cDot11AuthenMode	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.4	H3cDot11AuthenType	read-create	Represents the Authentication mode defined by 802.11.
H3C h3cDot11SSIDEncryptionMode	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.5	H3cDot11SSIDEncryptModeType	read-create	Represents the encryption mode for this ESS.
OCT h3cDot11WlanInfBindingType	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.6	OCTET STRING	read-create	Represents the service policy will bind to what kind of data forwarding interface.
I32 h3cDot11WlanInfBindingID	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.7	Integer32	read-create	Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.
ROW h3cDot11SrvPolicyRowStatus	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.8	RowStatus	read-create	The status of this table entry.
I32 h3cDot11ClientMaxCount	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.9	Integer32	read-create	Represent the maximum number of stations supported by this service policy.
H3C h3cDot11SPInCirMode	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.10	H3cDot11CirMode	read-create	CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
I32 h3cDot11SPInCirValue	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.11	Integer32	read-create	Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
H3C h3cDot11SPOutCirMode	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.12	H3cDot11CirMode	read-create	CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
I32 h3cDot11SPOutCirValue	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.13	Integer32	read-create	Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
I32 h3cDot11WlanInfPVID	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.14	Integer32	read-create	Represents the VLAN ID of SSID.
I32 h3cDot11SPInCirStaticValue	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.15	Integer32	read-create	Represents the CIR of inbound direction for static CIR mode.
I32 h3cDot11SPOutCirStaticValue	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.16	Integer32	read-create	Represents the CIR of outbound direction for static CIR mode.
T/F h3cDot11SPIsolate	1.3.6.1.4.1.2011.10.2.75.4.2.2.1.17	TruthValue	read-create	If it is true, then stations connected with the service policy are isolated.
h3cDot11ServicePolicyExtTable	1.3.6.1.4.1.2011.10.2.75.4.2.3		not-accessible	The table defines the parameters for ESS, as per service policy of CLI. When the value of h3cDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table.
h3cDot11ServicePolicyExtEntry	1.3.6.1.4.1.2011.10.2.75.4.2.3.1		not-accessible	Each entry contains information of each service policy under cipher(2) mode.
H3C h3cDot11ServicePolicyExtID	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.1	H3cDot11ServicePolicyIDType	not-accessible	Represents the ID of each service policy.
H3C h3cDot11SecIEStatus	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.2	H3cDot11SecIEStatusType	read-create	To enable the security Information element in the beacon and probe response frames sent by AP.
INT h3cDot11SecurityCiphers	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.3	INTEGER	read-create	The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy,it could support multiple cipher types at the same time.So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation.
INT h3cDot11CipherKeyIndex	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.4	INTEGER	read-create	Represents the key index of cipher key for packet. When h3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
OCT h3cDot11CipherKey	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.5	OCTET STRING	read-create	Represents the cipher key for packet. When h3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
ROW h3cDot11SrvPolicyExtRowStatus	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.6	RowStatus	read-create	The status of this table entry.
INT h3cDot11CipherKeyType	1.3.6.1.4.1.2011.10.2.75.4.2.3.1.7	INTEGER	read-create	Represents the cipher key type of h3cDot11CipherKey.
h3cDot11RadioPolicyExtTable	1.3.6.1.4.1.2011.10.2.75.4.2.4		not-accessible	The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy.
h3cDot11RadioPolicyExtEntry	1.3.6.1.4.1.2011.10.2.75.4.2.4.1		not-accessible	Each entry contains information of each radio policy.
OCT h3cDot11RPAPSerialID	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.1	OCTET STRING	not-accessible	This object represents the Serial ID of AP.
H3C h3cDot11RPRadioID	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.2	H3cDot11RadioScopeType	not-accessible	This object represents each radio.
I32 h3cDot11RPBeaconInterval	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.3	Integer32	read-write	This object represents the interval for Beacon management frame.
I32 h3cDot11RPDtimInterval	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.4	Integer32	read-write	This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
I32 h3cDot11RPRtsThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.5	Integer32	read-write	This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
I32 h3cDot11RPFragThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.6	Integer32	read-write	This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
I32 h3cDot11RPShortRetryThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.7	Integer32	read-write	This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to h3cDot11RTSThreshold, that shall be made before a failure condition is indicated.
I32 h3cDot11RPLongRetryThreshold	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.8	Integer32	read-write	This object represents the maximum number of transmission attempts of a frame, the length of which is longer than h3cDot11RTSThreshold, and that shall be made before a failure condition is indicated.
I32 h3cDot11RPClientMaxCount	1.3.6.1.4.1.2011.10.2.75.4.2.4.1.9	Integer32	read-write	This object represents the maximum number of stations supported by this radio policy.
h3cDot11SrvPortSecurityTable	1.3.6.1.4.1.2011.10.2.75.4.2.5		not-accessible	This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, h3cPortSecurityTables should be used to configure port security.
h3cDot11SrvPortSecurityEntry	1.3.6.1.4.1.2011.10.2.75.4.2.5.1		not-accessible	There is a row in this table for service policy.
H3C h3cDot11SecurityServicePolicyID	1.3.6.1.4.1.2011.10.2.75.4.2.5.1.1	H3cDot11ServicePolicyIDType	not-accessible	Represents the ID of each service policy.
INT h3cDot11SrvPortSecurityMode	1.3.6.1.4.1.2011.10.2.75.4.2.5.1.2	INTEGER	read-write	Determines the security modes of the WLAN port. noRestrictions(1) The default value,no any security mode is set. userLoginSecureExt(2) Access to the port is denied until the port client is authorized (by 802.1X). psk(3) Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk(4) The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk(5) This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. wapi(6) Access to the port is denied until the port client is authenticated (by WAPI).
INT h3cDot11SrvSecurityKeyType	1.3.6.1.4.1.2011.10.2.75.4.2.5.1.3	INTEGER	read-write	This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone(1) This means the key type is not set yet. userLoginTxKeyTypeDot11Key(2) This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key(3) This selects the RC4 key for RSA RC4 session encryption.
INT h3cDot11SrvSecurityPskKeyMode	1.3.6.1.4.1.2011.10.2.75.4.2.5.1.4	INTEGER	read-write	This is the password input mode. When input as pskKeyModePassPhrase, h3cDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, h3cDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
STR h3cDot11SrvSecurityPskKeyString	1.3.6.1.4.1.2011.10.2.75.4.2.5.1.5	DisplayString	read-write	This is the password string used for psk authentication.
h3cDot11SrvPolicyExtendTable	1.3.6.1.4.1.2011.10.2.75.4.2.6		not-accessible	The table defines the parameters of each service policy.
h3cDot11SrvPolicyExtendEntry	1.3.6.1.4.1.2011.10.2.75.4.2.6.1		not-accessible	Each entry contains information of each service policy.
INT h3cDot11SPEnable	1.3.6.1.4.1.2011.10.2.75.4.2.6.1.1	INTEGER	read-write	Represents whether the service policy is enabled.
h3cDot11APConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.3
h3cDot11APTemplateTable	1.3.6.1.4.1.2011.10.2.75.4.3.1		not-accessible	By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by h3cDot11APSerialID information in AP template.
h3cDot11APTemplateEntry	1.3.6.1.4.1.2011.10.2.75.4.3.1.1		not-accessible	Each entry contains configuration information for each AP.
OCT h3cDot11APTemplateName	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.1	OCTET STRING	not-accessible	Represents the name of AP template.
OCT h3cDot11APSerialID	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.2	OCTET STRING	read-create	Represents AP serial id.
OCT h3cDot11TemplateAPModelAlias	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.3	OCTET STRING	read-create	Represents the alias of AP model name.
OCT h3cDot11Description	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.4	OCTET STRING	read-create	This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
INT h3cDot11APWorkMode	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.5	INTEGER	read-create	Represents what work mode for AP. The following values are supported: normal(1), - AP will supply WLAN service. monitor(2) - AP will be a monitor to find attack. semiMonitor(3) - AP will supply WLAN service and Device detection is enabled.
ROW h3cDot11APTemplateRowStatus	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.6	RowStatus	read-create	The status of this table entry.
OCT h3cDot11APName	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.7	OCTET STRING	read-create	Represents the AP name.
I32 h3cDot11StatisInterv	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.8	Integer32	read-create	Represents the interval of radio statistic.
T/F h3cDot11APBroadcastProbeReply	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.9	TruthValue	read-create	Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
I32 h3cDot11StaIdleTimerInterv	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.10	Integer32	read-create	Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
I32 h3cDot11StaKeepAliveTimerInterv	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.11	Integer32	read-create	Represents the interval of the keep alive requests sent between AP and STA.
I32 h3cDot11APCir	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.12	Integer32	read-create	Represents the committed information rate between AP and AC.
I32 h3cDot11APCbs	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.13	Integer32	read-create	Represents the committed burst size between AP and AC.
I32 h3cDot11APPriorityLevel	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.14	Integer32	read-create	This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
I32 h3cDot11APElementID	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.15	Integer32	read-only	This object represents the AP element ID.
T/F h3cDot11APDevDetectEnable	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.16	TruthValue	read-create	Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object h3cDot11APWorkMode is monitor, device detection can not be enabled with object h3cDot11APDevDetectEnable. Device detection in normal AP mode can be enabled or disabled only when all radios of the AP are disabled.
INT h3cDot11APGetIPMethod	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.17	INTEGER	read-create	This object represents the method how AP gets IP address.
INT h3cDot11StatisIntervMode	1.3.6.1.4.1.2011.10.2.75.4.3.1.1.18	INTEGER	read-create	This object represents the mode of statics interval. normal(1) - statics interval value between 10s to 120s realtime(2) - statics interval value between 2s to 5s
h3cDot11RadioToConfigTable	1.3.6.1.4.1.2011.10.2.75.4.3.2		not-accessible	Before AP connects to AC, administrator will configure radio parameter to each radio.
h3cDot11RadioToConfigEntry	1.3.6.1.4.1.2011.10.2.75.4.3.2.1		not-accessible	Each entry contains configuration information for each radio.
OCT h3cDot11APTemplateNameCfg	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.1	OCTET STRING	not-accessible	Represents the name of AP template.
H3C h3cDot11CfgRadioID	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.2	H3cDot11RadioScopeType	not-accessible	Represents each radio.
OCT h3cDot11CfgRadioPolicyName	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.3	OCTET STRING	read-write	Represents the name of radio policy.
H3C h3cDot11CfgRadioType	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.4	H3cDot11RadioType	read-write	Represents the radio will work with which 802.11 radio type.
H3C h3cDot11CfgChannel	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.5	H3cDot11ChannelScopeType	read-write	Represents the channel allocation of radio.
H3C h3cDot11CfgMaxTxPowerLevel	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.6	H3cDot11TxPwrLevelScopeType	read-write	Represents the maximal transmit power scope for AP.
H3C h3cDot11PreambleLen	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.7	H3cDot11PreambleType	read-write	Represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLen will be valid. Othwise, the value for it will be invalid.
T/F h3cDot11CfgRadioStatus	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.8	TruthValue	read-write	Represents the radio admin status whether is enabled or disabled.
U32 h3cDot11CfgRdElementID	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.9	Unsigned32	read-only	Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
H3C h3cDot11CfgWorkMode	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.10	H3cDot11WorkMode	read-write	Represents work mode of the radio.
I32 h3cDot11CfgPwrAttValue	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.11	Integer32	read-write	Represents the value of power attenuation.
INT h3cDot11RadioTxArithmetic	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.12	INTEGER	read-write	Represents the transmission arithmetic of the radio. The following values are supported: quality(1) - Consider the quality first during the transmission. bandwidth(2) - Consider the bandwidth first during the transmission.
INT h3cDot11CfgChannelLockStat	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.13	INTEGER	read-write	Represents locked status of channel on the radio.
INT h3cDot11CfgPowerLockStat	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.14	INTEGER	read-write	Represents locked status of power on the radio.
U32 h3cDot11CfgLBRdGroupId	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.15	Unsigned32	read-write	Represents the load balance group ID allocated for the radio.
U32 h3cDot11CfgRRMSDRdGroupId	1.3.6.1.4.1.2011.10.2.75.4.3.2.1.16	Unsigned32	read-write	Represents the RRM self-decisive group ID allocated for the radio.
h3cDot11APServiceSetTable	1.3.6.1.4.1.2011.10.2.75.4.3.3		not-accessible	For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
h3cDot11APServiceSetEntry	1.3.6.1.4.1.2011.10.2.75.4.3.3.1		not-accessible	Each entry contains service policy information for each specific radio of AP.
H3C h3cDot11CfgServicePolicyID	1.3.6.1.4.1.2011.10.2.75.4.3.3.1.1	H3cDot11ServicePolicyIDType	not-accessible	Represents the ID of each service policy used by the AP.
ROW h3cDot11SrvSetRowStatus	1.3.6.1.4.1.2011.10.2.75.4.3.3.1.2	RowStatus	read-create	The status of this table entry.
I32 h3cDot11ServiceSetVlanId	1.3.6.1.4.1.2011.10.2.75.4.3.3.1.3	Integer32	read-create	Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio.
h3cDot11APSysInfoSetTable	1.3.6.1.4.1.2011.10.2.75.4.3.4		not-accessible	The table of the system information for each AP.
h3cDot11APSysInfoSetEntry	1.3.6.1.4.1.2011.10.2.75.4.3.4.1		not-accessible	The system information configuration for each AP.
OCT h3cDot11APSysNetID	1.3.6.1.4.1.2011.10.2.75.4.3.4.1.1	OCTET STRING	read-write	Represents the system Net ID for AP.
I32 h3cDot11APCpuUsageThreshold	1.3.6.1.4.1.2011.10.2.75.4.3.4.1.2	Integer32	read-write	The CPU usage threshold for AP.
I32 h3cDot11APMemUsageThreshold	1.3.6.1.4.1.2011.10.2.75.4.3.4.1.3	Integer32	read-write	The memory usage threshold for AP.
h3cDot11APLimitTable	1.3.6.1.4.1.2011.10.2.75.4.3.5		not-accessible	For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s).
h3cDot11APLimitEntry	1.3.6.1.4.1.2011.10.2.75.4.3.5.1		not-accessible	Each entry contains the limit information for each AP.
I32 h3cDot11APSsidNumLimit	1.3.6.1.4.1.2011.10.2.75.4.3.5.1.1	Integer32	read-write	Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.
I32 h3cDot11APUserCntLimit	1.3.6.1.4.1.2011.10.2.75.4.3.5.1.2	Integer32	read-write	Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.
I32 h3cDot11APUserThreshold	1.3.6.1.4.1.2011.10.2.75.4.3.5.1.3	Integer32	read-write	Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP.
h3cDot11APIfSetTable	1.3.6.1.4.1.2011.10.2.75.4.3.6		not-accessible	The table of the interface information for each AP.
h3cDot11APIfSetEntry	1.3.6.1.4.1.2011.10.2.75.4.3.6.1		not-accessible	The interface information configuration for each AP.
I32 h3cDot11APSetIfIndex	1.3.6.1.4.1.2011.10.2.75.4.3.6.1.1	Integer32	not-accessible	Represents the index for a interface.
STR h3cDot11APIfAlias	1.3.6.1.4.1.2011.10.2.75.4.3.6.1.2	DisplayString	read-write	This object is an 'alias' name for the interface as specified by a network manager for AP.
h3cDot11APServiceVlanTable	1.3.6.1.4.1.2011.10.2.75.4.3.7		not-accessible	For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies.
h3cDot11APServiceVlanEntry	1.3.6.1.4.1.2011.10.2.75.4.3.7.1		not-accessible	Each entry contains service policy information for each AP.
OCT h3cDot11APServiceVlanSerialID	1.3.6.1.4.1.2011.10.2.75.4.3.7.1.1	OCTET STRING	not-accessible	This object represents AP serial id.
H3C h3cDot11APServiceVlanSPID	1.3.6.1.4.1.2011.10.2.75.4.3.7.1.2	H3cDot11ServicePolicyIDType	not-accessible	This object represents the ID of each service policy used by the AP.
I32 h3cDot11APServiceVlanId	1.3.6.1.4.1.2011.10.2.75.4.3.7.1.3	Integer32	read-create	This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio.
ROW h3cDot11APServiceVlanRowStatus	1.3.6.1.4.1.2011.10.2.75.4.3.7.1.4	RowStatus	read-create	This object represents the status of this table entry.
h3cDot11RadioConfigTable	1.3.6.1.4.1.2011.10.2.75.4.3.8		not-accessible	Before AP connects to AC, administrator will configure radio parameter to each radio.
h3cDot11RadioConfigEntry	1.3.6.1.4.1.2011.10.2.75.4.3.8.1		not-accessible	Each entry contains configuration information for each radio.
OCT h3cDot11RCAPSerialID	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.1	OCTET STRING	not-accessible	This object represents the Serial ID of AP.
H3C h3cDot11RCRadioID	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.2	H3cDot11RadioScopeType	not-accessible	This object represents each radio.
H3C h3cDot11RCRadioType	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.3	H3cDot11RadioType	read-write	This object represents the radio will work with which 802.11 radio type.
H3C h3cDot11RCChannel	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.4	H3cDot11ChannelScopeType	read-write	This object represents the channel allocation of radio.
H3C h3cDot11RCPreambleLen	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.5	H3cDot11PreambleType	read-write	This object represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
I32 h3cDot11RCPwrAttValue	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.6	Integer32	read-write	This object represents the value of power attenuation.
H3C h3cDot11RCApPowerLevel	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.7	H3cDot11TxPwrLevelScopeType	read-write	Represents the maximal transmit power scope for AP.
T/F h3cDot11RCDynamicChlState	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.8	TruthValue	read-write	Enable/Disable dynamic channel selection.
T/F h3cDot11RCDynamicPowerState	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.9	TruthValue	read-write	Enable/Disable dynamic power selection for the band.
T/F h3cDot11RCRadioStatus	1.3.6.1.4.1.2011.10.2.75.4.3.8.1.10	TruthValue	read-write	Represents the radio admin status whether is enabled or disabled.
h3cDot11RadioSSIDCfgTable	1.3.6.1.4.1.2011.10.2.75.4.3.9		not-accessible	For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
h3cDot11RadioSSIDCfgEntry	1.3.6.1.4.1.2011.10.2.75.4.3.9.1		not-accessible	Each entry contains SSID configuration information for each radio.
H3C h3cDot11RadioSSIDSerialID	1.3.6.1.4.1.2011.10.2.75.4.3.9.1.1	H3cDot11ObjectIDType	not-accessible	This object represents the serial ID of AP.
H3C h3cDot11RadioSSIDRadioID	1.3.6.1.4.1.2011.10.2.75.4.3.9.1.2	H3cDot11RadioScopeType	not-accessible	This object represents each radio.
I32 h3cDot11RadioSSIDWLANID	1.3.6.1.4.1.2011.10.2.75.4.3.9.1.3	Integer32	not-accessible	This object represents the WLAN ID of the BSSID.
H3C h3cDot11RadioSSIDIndex	1.3.6.1.4.1.2011.10.2.75.4.3.9.1.4	H3cDot11ServicePolicyIDType	read-create	This object represents the ID of each service policy used by the radio.
MAC h3cDot11RadioBSSID	1.3.6.1.4.1.2011.10.2.75.4.3.9.1.5	MacAddress	read-only	As MAC address format, it is used to identify BSS.
ROW h3cDot11RadioSSIDRowStatus	1.3.6.1.4.1.2011.10.2.75.4.3.9.1.6	RowStatus	read-create	RowStatus.
h3cDot11APSerialIDTable	1.3.6.1.4.1.2011.10.2.75.4.3.10		not-accessible	The table will provide the general information about APs.
h3cDot11APSerialIDEntry	1.3.6.1.4.1.2011.10.2.75.4.3.10.1		not-accessible	Each entry contains the general information of an AP.
OCT h3cDot11SIDAPSerialID	1.3.6.1.4.1.2011.10.2.75.4.3.10.1.1	OCTET STRING	not-accessible	Represents AP serial id.
INT h3cDot11SIDAPWorkMode	1.3.6.1.4.1.2011.10.2.75.4.3.10.1.2	INTEGER	read-write	Represents what work mode for AP. The following values are supported: normal(1), - AP will supply WLAN service. monitor(2) - AP will be a monitor to find attack. hybrid(3) - AP will supply WLAN service and Device detection is enabled.
INT h3cDot11SIDAPGetIPMethod	1.3.6.1.4.1.2011.10.2.75.4.3.10.1.3	INTEGER	read-write	This object represents the method how AP gets IP address.
h3cDot11APSTVlanTable	1.3.6.1.4.1.2011.10.2.75.4.3.11		not-accessible	For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies.
h3cDot11APSTVlanEntry	1.3.6.1.4.1.2011.10.2.75.4.3.11.1		not-accessible	Each entry contains VLAN and service policy information for each specific radio of AP.
I32 h3cDot11CfgSTVLANID	1.3.6.1.4.1.2011.10.2.75.4.3.11.1.1	Integer32	read-create	Represents the VLAN that current Service Policy have bind to.
I32 h3cDot11CfgSTNASPortID	1.3.6.1.4.1.2011.10.2.75.4.3.11.1.2	Integer32	read-only	Represents the NAS Port ID of current Service Policy for each specific radio of AP.
ROW h3cDot11CfgServiceSetRowStatus	1.3.6.1.4.1.2011.10.2.75.4.3.11.1.3	RowStatus	read-create	The status of this table entry.
h3cDot11RadioIntfConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.4
h3cDot11RadioIntfConfigTable	1.3.6.1.4.1.2011.10.2.75.4.4.1		not-accessible	The table defines the parameters for radio in AP, as per radio.
h3cDot11RadioIntfConfigEntry	1.3.6.1.4.1.2011.10.2.75.4.4.1.1		not-accessible	Each entry contains information of each radio in AP.
I32 h3cDot11RadioIfIdx	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.1	Integer32	not-accessible	Represents the Radio IfIndex of radio in AP.
I32 h3cDot11RadioCfgBeaconIntvl	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.2	Integer32	read-write	Represents the interval for Beacon management frame.
I32 h3cDot11RadioCfgDtimIntvl	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.3	Integer32	read-write	Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
I32 h3cDot11RadioCfgRtsThreshold	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.4	Integer32	read-write	Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
I32 h3cDot11RadioCfgFragThreshold	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.5	Integer32	read-write	Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
I32 h3cDot11RadioCfgShtRetryThld	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.6	Integer32	read-write	Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to h3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
I32 h3cDot11RadioCfglongRtrThld	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.7	Integer32	read-write	Represents the maximum number of transmission attempts of a frame, the length of which is longer than h3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
U32 h3cDot11RadioCfgMaxRxLifetime	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.8	Unsigned32	read-write	Represents the elapsed time. After the time specified by h3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
H3C h3cDot11RadioCfgType	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.9	H3cDot11RadioType	read-write	Represents the radio will work with which 802.11 radio type.
H3C h3cDot11RadioCfgChannel	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.10	H3cDot11ChannelScopeType	read-write	Represents the channel allocation of radio.
H3C h3cDot11RadioCfgMaxTxPwrLvl	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.11	H3cDot11TxPwrLevelScopeType	read-write	Represents the maximal transmit power scope for AP.
H3C h3cDot11RadioCfgPreambleLen	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.12	H3cDot11PreambleType	read-write	Represents whether use long or short preamble for 802.11 MAC frame.
H3C h3cDot11RadioCfgWorkMode	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.13	H3cDot11WorkMode	read-write	Represents work mode of the radio.
T/F h3cDot11RadioCfgOnly11gEnable	1.3.6.1.4.1.2011.10.2.75.4.4.1.1.14	TruthValue	read-write	Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled.
h3cDot11RadioIntfBindTable	1.3.6.1.4.1.2011.10.2.75.4.4.2		not-accessible	The table defines the binding information for each radio in AP.
h3cDot11RadioIntfBindEntry	1.3.6.1.4.1.2011.10.2.75.4.4.2.1		not-accessible	Each entry contains the radio interface binding information in AP.
H3C h3cDot11RadioIntfBindSvcPlcyID	1.3.6.1.4.1.2011.10.2.75.4.4.2.1.1	H3cDot11ServicePolicyIDType	not-accessible	Represents the ID of each service policy.
U32 h3cDot11RadioIntfBindIfIdx	1.3.6.1.4.1.2011.10.2.75.4.4.2.1.2	Unsigned32	read-create	Represents the Ifindex of interface which is binded to the radio.
ROW h3cDot11RadioIntfBindRowStatus	1.3.6.1.4.1.2011.10.2.75.4.4.2.1.3	RowStatus	read-create	The status of this table entry.
h3cDot11DataRateConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.5
h3cDot11DataRateConfigTable	1.3.6.1.4.1.2011.10.2.75.4.5.1		not-accessible	Table will provide data rate configuration for a specific radio type.
h3cDot11DataRateConfigEntry	1.3.6.1.4.1.2011.10.2.75.4.5.1.1		not-accessible	Each entry of the table will provide data rate configuration for a specific radio type.
H3C h3cDot11RadioTypeID	1.3.6.1.4.1.2011.10.2.75.4.5.1.1.1	H3cDot11RadioType	not-accessible	Represents the radio type.
OCT h3cDot11SupportedRateSet	1.3.6.1.4.1.2011.10.2.75.4.5.1.1.2	OCTET STRING	read-write	Represents the supported rate set of a particular radio type.
OCT h3cDot11MandatoryRateSet	1.3.6.1.4.1.2011.10.2.75.4.5.1.1.3	OCTET STRING	read-write	Represents the mandatory rate set of a particular radio type.
OCT h3cDot11DisabledRateSet	1.3.6.1.4.1.2011.10.2.75.4.5.1.1.4	OCTET STRING	read-write	Represents the disabled rate set of a particular radio type.
OCT h3cDot11SmartRateSet	1.3.6.1.4.1.2011.10.2.75.4.5.1.1.5	OCTET STRING	read-write	Represents the rate set of a particular radio type.
h3cDot11InterfaceConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.6
h3cDot11WlanEssIfTable	1.3.6.1.4.1.2011.10.2.75.4.6.1		not-accessible	This table is used to configure WLAN ESS interface.
h3cDot11WlanEssIfEntry	1.3.6.1.4.1.2011.10.2.75.4.6.1.1		not-accessible	Each entry contains the WLAN ESS interface configuration.
I32 h3cDot11WlanEssIfNumber	1.3.6.1.4.1.2011.10.2.75.4.6.1.1.1	Integer32	not-accessible	This node represents the WLAN ESS interface number.
I32 h3cDot11WlanEssIfIndex	1.3.6.1.4.1.2011.10.2.75.4.6.1.1.2	Integer32	read-only	This node represents the ifIndex of WLAN-ESS interface.
ROW h3cDot11WlanEssRowStatus	1.3.6.1.4.1.2011.10.2.75.4.6.1.1.3	RowStatus	read-create	This node represents the WLAN ESS interface row status.
h3cDot11WlanBssIfTable	1.3.6.1.4.1.2011.10.2.75.4.6.2		not-accessible	This table is used to configure WLAN BSS interface.
h3cDot11WlanBssIfEntry	1.3.6.1.4.1.2011.10.2.75.4.6.2.1		not-accessible	Each entry contains the WLAN BSS interface configuration.
I32 h3cDot11WlanBssIfNumber	1.3.6.1.4.1.2011.10.2.75.4.6.2.1.1	Integer32	not-accessible	This node represents the WLAN BSS interface number.
I32 h3cDot11WlanBssIfIndex	1.3.6.1.4.1.2011.10.2.75.4.6.2.1.2	Integer32	read-only	This node represents the ifIndex of WLAN-BSS interface.
ROW h3cDot11WlanBssRowStatus	1.3.6.1.4.1.2011.10.2.75.4.6.2.1.3	RowStatus	read-create	This node represents the WLAN BSS interface row status.
h3cDot11WLANEthernetIfTable	1.3.6.1.4.1.2011.10.2.75.4.6.3		not-accessible	This table is used to configure WLAN Ethernet interface.
h3cDot11WLANEthernetIfEntry	1.3.6.1.4.1.2011.10.2.75.4.6.3.1		not-accessible	Each entry contains the WLAN Ethernet interface configuration.
I32 h3cDot11WlanEthernetIfNumber	1.3.6.1.4.1.2011.10.2.75.4.6.3.1.1	Integer32	not-accessible	This node represents the WLAN Ethernet interface number.
I32 h3cDot11WLANEthernetIfIndex	1.3.6.1.4.1.2011.10.2.75.4.6.3.1.2	Integer32	read-only	This node represents the ifIndex of WLAN-Ethernet interface.
ROW h3cDot11WlanEthernetRowStatus	1.3.6.1.4.1.2011.10.2.75.4.6.3.1.3	RowStatus	read-create	This node represents the Wlan Ethernet interface row status.
h3cDot11PortSecurityTable	1.3.6.1.4.1.2011.10.2.75.4.6.4		not-accessible	This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, h3cPortSecurityTables should be used to configure port security.
h3cDot11PortSecurityEntry	1.3.6.1.4.1.2011.10.2.75.4.6.4.1		not-accessible	There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB.
INT h3cDot11PortSecurityMode	1.3.6.1.4.1.2011.10.2.75.4.6.4.1.1	INTEGER	read-write	Determines the security modes of the WLAN port. noRestrictions(1) The default value,no any security mode is set. userLoginSecureExt(2) Access to the port is denied until the port client is authorized (by 802.1X). psk(3) Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk(4) The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk(5) This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. wapi(6) Access to the port is denied until the port client is authenticated (by WAPI).
INT h3cDot11SecurityUserLoginTxKeyType	1.3.6.1.4.1.2011.10.2.75.4.6.4.1.2	INTEGER	read-write	This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone(1) This means the key type is not set yet. userLoginTxKeyTypeDot11Key(2) This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key(3) This selects the RC4 key for RSA RC4 session encryption.
INT h3cDot11SecurityPskKeyMode	1.3.6.1.4.1.2011.10.2.75.4.6.4.1.3	INTEGER	read-write	This is the password input mode. When input as pskKeyModePassPhrase, h3cDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, h3cDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
STR h3cDot11SecurityPskKeyString	1.3.6.1.4.1.2011.10.2.75.4.6.4.1.4	DisplayString	read-write	This is the password string used for psk authentication.
h3cDot11WlanMeshIfTable	1.3.6.1.4.1.2011.10.2.75.4.6.5		not-accessible	This table is used to configure WLAN mesh interface.
h3cDot11WlanMeshIfEntry	1.3.6.1.4.1.2011.10.2.75.4.6.5.1		not-accessible	Each entry contains the WLAN mesh interface configuration.
I32 h3cDot11WlanMeshIfNumber	1.3.6.1.4.1.2011.10.2.75.4.6.5.1.1	Integer32	not-accessible	This node represents the WLAN mesh interface number.
I32 h3cDot11WlanMeshIfIndex	1.3.6.1.4.1.2011.10.2.75.4.6.5.1.2	Integer32	read-only	This node represents the index of WLAN mesh interface.
ROW h3cDot11WlanMeshRowStatus	1.3.6.1.4.1.2011.10.2.75.4.6.5.1.3	RowStatus	read-create	This node represents the WLAN mesh interface row status.
h3cDot11ACBackupGroup	1.3.6.1.4.1.2011.10.2.75.4.7
IP h3cDot11BackupACAdrssIP	1.3.6.1.4.1.2011.10.2.75.4.7.1	InetAddress	read-write	This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0.
IP h3cDot11BackupACAdrssIPv6	1.3.6.1.4.1.2011.10.2.75.4.7.2	InetAddress	read-write	This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0.
h3cDot11RadioElementConfigGroup	1.3.6.1.4.1.2011.10.2.75.4.8
h3cDot11nRadioCfgTable	1.3.6.1.4.1.2011.10.2.75.4.8.1		not-accessible	This table is used to configure dot11n on the radio.
h3cDot11nRadioCfgEntry	1.3.6.1.4.1.2011.10.2.75.4.8.1.1		not-accessible	This entry contains the dot11n configuration on the radio.
H3C h3cDot11nRadioCfgIndex	1.3.6.1.4.1.2011.10.2.75.4.8.1.1.1	H3cDot11RadioElementIndex	not-accessible	Represents index of the radio.
T/F h3cDot11nAMpduEnable	1.3.6.1.4.1.2011.10.2.75.4.8.1.1.2	TruthValue	read-write	Enable the function of A-MPDU.
T/F h3cDot11nAMsduEnable	1.3.6.1.4.1.2011.10.2.75.4.8.1.1.3	TruthValue	read-write	Enable the function of A-MSDU.
T/F h3cDot11nClientDot11nOnly	1.3.6.1.4.1.2011.10.2.75.4.8.1.1.4	TruthValue	read-write	Only permit clients of 11n mode.
INT h3cDot11nChanelBand	1.3.6.1.4.1.2011.10.2.75.4.8.1.1.5	INTEGER	read-write	Specify the bandwidth mode.
T/F h3cDot11nShortGiEnable	1.3.6.1.4.1.2011.10.2.75.4.8.1.1.6	TruthValue	read-write	The function of Short GI.
h3cDot11RadioWDSTable	1.3.6.1.4.1.2011.10.2.75.4.8.2		not-accessible	This table is used to configure WDS on the radio.
h3cDot11RadioWDSEntry	1.3.6.1.4.1.2011.10.2.75.4.8.2.1		not-accessible	Each entry contains the WDS configuration on the radio.
H3C h3cDot11RadioWDSIndex	1.3.6.1.4.1.2011.10.2.75.4.8.2.1.1	H3cDot11RadioElementIndex	not-accessible	Represents the element index of radio.
INT h3cDot11RadioWDSMode	1.3.6.1.4.1.2011.10.2.75.4.8.2.1.2	INTEGER	read-write	Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled
OCT h3cDot11RadioWDSNetWorkID	1.3.6.1.4.1.2011.10.2.75.4.8.2.1.3	OCTET STRING	read-write	Represents the mesh ID of WDS.
INT h3cDot11WDSSecPskKeyMode	1.3.6.1.4.1.2011.10.2.75.4.8.2.1.4	INTEGER	read-write	Represents the PSK mode of WDS.
STR h3cDot11WDSSecPskKeyString	1.3.6.1.4.1.2011.10.2.75.4.8.2.1.5	DisplayString	read-write	Represents the PSK value of WDS.
h3cDot11CfgNotifyGroup	1.3.6.1.4.1.2011.10.2.75.4.9
h3cDot11CfgNotifications	1.3.6.1.4.1.2011.10.2.75.4.9.0
NTF h3cDot11CfgCipherChange	1.3.6.1.4.1.2011.10.2.75.4.9.0.1			This notification is sent when cipher type of corresponding service template is changed.
NTF h3cDot11CfgPSKChange	1.3.6.1.4.1.2011.10.2.75.4.9.0.2			This notification is sent when pre-shared key of corresponding service template is changed.
NTF h3cDot11SSIDWepIDConflictTrap	1.3.6.1.4.1.2011.10.2.75.4.9.0.3			This notification will be sent when the same wep ID is configured on two service policies.
h3cDot11CfgTrapVarObjects	1.3.6.1.4.1.2011.10.2.75.4.9.1
I32 h3cDot11PreConflictTemplateNum	1.3.6.1.4.1.2011.10.2.75.4.9.1.1	Integer32	accessible-for-notify	Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
I32 h3cDot11CurrConflictTemplateNum	1.3.6.1.4.1.2011.10.2.75.4.9.1.2	Integer32	accessible-for-notify	Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
I32 h3cDot11ConflictCipherIdx	1.3.6.1.4.1.2011.10.2.75.4.9.1.3	Integer32	accessible-for-notify	Represents wep ID that conflicted with.
H3C h3cDot11ConfigureAPID	1.3.6.1.4.1.2011.10.2.75.4.9.1.4	H3cDot11ObjectIDType	accessible-for-notify	Represents which AP is configured.
H3C h3cDot11ConfigureRadioID	1.3.6.1.4.1.2011.10.2.75.4.9.1.5	H3cDot11RadioScopeType	accessible-for-notify	Represents which radio in AP is configured.

RFC description

H3C vendor-private MIB for IEEE 802.11 wireless LAN configuration and management on H3C access points and controllers.

Start monitoring H3C wireless LAN controller/access point (802.11 basic config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-DOT11-CFG-MIB

What Is H3C-DOT11-CFG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description