| OID symbolic | OID numeric | Type | Access | Description |
|---|
| h320Entity | 0.0.8.341.1.2.1 | | | This MIB module supports the common functions of the
ITU-T H.320 terminal, MCU and H.320/H.323 gateway |
| h320Capability | 0.0.8.341.1.2.1.1 | | | |
| h320CapsTable | 0.0.8.341.1.2.1.1.1 | | not-accessible | A list of capability entries. Objects are grouped as a
table so that one can use this table in the H.320 terminal,
the H.320 MCU, and the H.320/H.323 gateway.
The total number of capability entries is
equal to the number of H.320 entities in a system.
For instance, there will be one row of capability
in the table of the H.320 terminal. The number of rows
will be equal to the number of H320 entities in the MCU
and the H320/H323 gateway.
These entries describe the general capability of a system.
Within a particular call, the behavior of the system is
further constrained by the characteristics of the call itself.
For example, h320CapsEntityMaxVideoRate describes
the maximum video rate a system can handle (perhaps
due to processing constraints). A particular call's transfer
rate may limit video to a lower rate |
| h320CapsEntry | 0.0.8.341.1.2.1.1.1.1 | | not-accessible | A capability row. |
| INT terminalIndex | 0.0.8.341.1.2.1.1.1.1.1 | INTEGER | not-accessible | A unique value for each video conference entity.
The value ranges between 1 and the number of H.320 entities
in a system. For instance, the table in the H.320 terminal
has one row and the H.323/H.320 gateway or the H.320 MCU may
have multiple rows of the H.320 capability. |
| MMT h320CapsEntityLineRate | 0.0.8.341.1.2.1.1.1.1.2 | MmTerminalLineRateCapability | read-only | This object represents the line rate capabilities of
the H.320 entity. Supported line rates are indicated by
an octet string marked with 1s. |
| MMT h320CapsEntityVideoFormats | 0.0.8.341.1.2.1.1.1.1.3 | MmTerminalVideoCapability | read-only | This object represents the video capabilities of the
H.320 entity. This includes the various video algorithms
that it supports. |
| I32 h320CapsEntityMaxVideoRate | 0.0.8.341.1.2.1.1.1.1.4 | Integer32 | read-only | The maximum bit rate in kbit/s that the video channel can do. |
| MMT h320CapsEntityAudioTypes | 0.0.8.341.1.2.1.1.1.1.5 | MmTerminalAudioCapability | read-only | This object represents the audio capabilities of the
H320 entity. This includes the various audio algorithms
that it supports. |
| MMT h320CapsEntityDataCaps | 0.0.8.341.1.2.1.1.1.1.6 | MmTerminalDataCapability | read-only | This object represents the data capability of the
entity. |
| I32 h320CapsEntityEncryp | 0.0.8.341.1.2.1.1.1.1.7 | Integer32 | read-only | This object represents the encryption capability of the
entity.
Capability Bit #
other 0
H.233/H.234 1
Bits are numbered starting with the most
significant bit of the first byte being bit 0, the
least significant bit of the first byte being bit
7, the most significant bit of the second byte
being bit 8, and so on. A one bit encodes that
the capability is supported, a zero bit encodes that
the capability is not supported. |
| I32 h320CapsEntryRDC | 0.0.8.341.1.2.1.1.1.1.8 | Integer32 | read-only | This object represents the Remote Device Control
capability of the entity.
Capability Bit #
Other 0
H.281 1 -- Far-end Camera Control
Bits are numbered starting with the most
significant bit of the first byte being bit 0, the
least significant bit of the first byte being bit
7, the most significant bit of the second byte
being bit 8, and so on. A one bit encodes that
the capability is supported, a zero bit encodes that
the capability is not supported. |
| h320CallStatus | 0.0.8.341.1.2.1.2 | | | |
| h320CallStatusTable | 0.0.8.341.1.2.1.2.1 | | not-accessible | A list of call status entries. Objects are grouped as a
table so that one can use this table in the H.320
terminal, the H.320 MCU, and the H.320/H.323 gateway.
The total number of call status entries is equal to the
number of H.320 entities in a system. For instance, there
will be one row of call status in the table of the H.320
terminal. The number of rows will be equal to the number
of H320 entities in the MCU and the H320/H323 gateway |
| h320CallStatusEntry | 0.0.8.341.1.2.1.2.1.1 | | not-accessible | A call status row. |
| INT h320CallCurrentCallStatus | 0.0.8.341.1.2.1.2.1.1.1 | INTEGER | read-only | The current call status. An idle(1) means there were
no calls placed since the system is up. Once calls
were established and disconnected, the system remains
in the disconnected(5) state. A connected(2)
means the call is established and reached its
intended mode of operation |
| STR h320CallSiteName | 0.0.8.341.1.2.1.2.1.1.2 | DisplayString | read-only | The address to which this call is made. |
| MMT h320CallLineRate | 0.0.8.341.1.2.1.2.1.1.3 | MmTerminalLineRateCapability | read-only | This object represents the line rate being used
in the current call in progress. |
| MMT h320CallVideoInFormat | 0.0.8.341.1.2.1.2.1.1.4 | MmTerminalVideoCapability | read-only | This object represents the video decoding format being
used in the current call in progress. |
| MMT h320CallVideoOutFormat | 0.0.8.341.1.2.1.2.1.1.5 | MmTerminalVideoCapability | read-only | This object represents the video encoding format being
used in the current call in progress. |
| MMT h320CallAudioInFormat | 0.0.8.341.1.2.1.2.1.1.6 | MmTerminalAudioCapability | read-only | This object represents the audio decoding format
being used in the current call in progress. |
| MMT h320CallAudioOutFormat | 0.0.8.341.1.2.1.2.1.1.7 | MmTerminalAudioCapability | read-only | This object represents the audio encoding format
being used in the current call in progress. |
| MMT h320CallData | 0.0.8.341.1.2.1.2.1.1.8 | MmTerminalDataCapability | read-only | This object represents the type of data communication
protocol used in the call. |
| INT h320CallEncryp | 0.0.8.341.1.2.1.2.1.1.9 | INTEGER | read-only | This object indicates the type of encryption
protocol used in the call.
1 indicates other type of encryption.
2 indicates the encryption based on H.233. |
| INT h320CallRDC | 0.0.8.341.1.2.1.2.1.1.10 | INTEGER | read-only | This object indicates the type of remote device
control.
1 indicates other type of device is used.
2 indicates the FECC is used. |
| INT h221CallStatusHangUpDirection | 0.0.8.341.1.2.1.2.1.1.11 | INTEGER | read-only | Identifies who initiated hanging up the last call:
the near end user; the near end videoconferencing
system (perhaps due to errors such as loss of framing);
or the far end/ network. If a call is currently active,
this refers to the previous call. |
| INT h221CallStatusQ850Cause | 0.0.8.341.1.2.1.2.1.1.12 | INTEGER | read-only | The Q.850 cause code received from the network when the
last call hung-up. If the near end hung up the call,
this field should be set to zero. If a call is currently
active, this refers to the previous call. |
| h320H221Stats | 0.0.8.341.1.2.1.3 | | | |
| h221ChannelStatsTable | 0.0.8.341.1.2.1.3.1 | | not-accessible | A list of statistics entries. Objects are grouped as a
table so that one can use this table in the H.320 terminal,
the H.320 MCU, and the H.320/H.323 gateway.
The total number of statistics entries is
equal to the number of H.320 entities in a system.
For instance, there will be one row of statistics
in the table of the H.320 terminal. The number of rows
will be equal to the number of H320 entities in the MCU
and the H320/H323 gateway |
| h221ChannelStatsEntry | 0.0.8.341.1.2.1.3.1.1 | | not-accessible | A h221 statistics row. |
| INT numberofConnections | 0.0.8.341.1.2.1.3.1.1.1 | INTEGER | read-only | The number of connections in each channel
in a call. For instance 2x64 has two connections |
| C32 h221StatsInVideoFramesEx | 0.0.8.341.1.2.1.3.1.1.2 | Counter32 | read-only | The total number of video BCH frames received |
| C32 h221StatsInVideoFramesCorrectableErrs | 0.0.8.341.1.2.1.3.1.1.3 | Counter32 | read-only | The number of video BCH frames received with
correctable errors |
| C32 h221StatsInVideoFramesUncorrectableErrs | 0.0.8.341.1.2.1.3.1.1.4 | Counter32 | read-only | The number of video BCH frames received with
uncorrectable errors |
| C32 h221StatsOutVCU | 0.0.8.341.1.2.1.3.1.1.5 | Counter32 | read-only | The number of VCUs transmitted |
| h221ConnectionStatsTable | 0.0.8.341.1.2.1.3.2 | | not-accessible | A list of statistics entries for each port. There are
two connections if the call is 2x64. These statistics
get re-initialized at the start of each call and are
retained after the end of the call. Thus, one can query
these items after the end of call and prior to the start
of a new call to get the overall statistics of the old
call. |
| h221ConnectionStatsEntry | 0.0.8.341.1.2.1.3.2.1 | | not-accessible | A h221 statistics row. |
| INT connectionIndex | 0.0.8.341.1.2.1.3.2.1.1 | INTEGER | not-accessible | A unique value for each entry. The value ranges
between 1 and the number of connections indicated
in numberofConnections. |
| C32 h221StatsInFrames | 0.0.8.341.1.2.1.3.2.1.2 | Counter32 | read-only | The number of H.221 frames received |
| C32 h221StatsOutFrames | 0.0.8.341.1.2.1.3.2.1.3 | Counter32 | read-only | The number of H.221 frames sent |
| C32 h221StatsInFrameErrs | 0.0.8.341.1.2.1.3.2.1.4 | Counter32 | read-only | The number of error frames received |
| C32 h221StatsFrameAlignmentErrs | 0.0.8.341.1.2.1.3.2.1.5 | Counter32 | read-only | The number of times frame alignment is lost, i.e.
three consecutive frame alignment words were
received with an error after the establishment
of frame alignment. |
| C32 h221StatsMultiFrameAlignmentErrs | 0.0.8.341.1.2.1.3.2.1.6 | Counter32 | read-only | The number of times multi-frame alignment is lost, i.e.
three consecutive multi-frame alignment words were
received with an error after the establishment
of frame alignment. |
| G32 h221StatsErrorPerformance | 0.0.8.341.1.2.1.3.2.1.7 | Gauge32 | read-only | The quality of the 64 kbp/s connection can be monitored
by counting the number of CRC blocks in error (E-bit = 1)
within a period of one second (50 blocks). The following
indicates the mapping between the number of CRC blocks
in error and the equivalent line error rate.
Percentage of CRC blocks in error Error rate
70% CRC blocks in error 10E-4
12% CRC blocks in error 10E-5
1.2% CRC blocks in error 10E-6
0.12% CRC blocks in error 10E-7
0.012% CRC blocks in error 10E-8 |
| C32 h221StatsBASErrs | 0.0.8.341.1.2.1.3.2.1.8 | Counter32 | read-only | The number of BAS codes received with ECC errors |
| C32 h221StatsCRC4Err | 0.0.8.341.1.2.1.3.2.1.9 | Counter32 | read-only | The number of frames received with CRC4 errors |
| C32 h221StatsInEBit | 0.0.8.341.1.2.1.3.2.1.10 | Counter32 | read-only | The number of frames received with the E bit set |
| C32 h221StatsInopportuneBAS | 0.0.8.341.1.2.1.3.2.1.11 | Counter32 | read-only | The number of BAS codes received at inappropriate
times (e.g. commands received in the middle of
capabilities exchange). |
| h320EntityMIBConfs | 0.0.8.341.1.2.1.4 | | | |
| h320EntityMIBGroups | 0.0.8.341.1.2.1.4.1 | | | |
| h320CapsGroups | 0.0.8.341.1.2.1.4.1.1 | | | A collection of objects providing capabilities of
the entity |
| h320CallStatusGroup | 0.0.8.341.1.2.1.4.1.2 | | | A collection of objects providing the ability to
invoke terminal functions |
| h320H221StatsGroup | 0.0.8.341.1.2.1.4.1.3 | | | A collection of objects providing the ability to invoke
terminal functions |
| h320EntityMIBCompl | 0.0.8.341.1.2.1.4.2 | | | |
| h221StatsCompliance | 0.0.8.341.1.2.1.4.2.1 | | | The set of objects required for compliance |
