GSM7324-RADIUS-MIB

All MIBs › GSM7324-RADIUS-MIB

Organization: Netgear

Last Updated: 2003-05-07

Category: Protocol: RADIUS, Vendor: Netgear

Description: Netgear GSM7324 switch MIB for RADIUS server configuration, 802.1X authentication, and accounting statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GSM7324-RADIUS-MIB?

GSM7324-RADIUS-MIB is a Netgear vendor-specific MIB for the GSM7324 managed Gigabit switch, defining objects for configuring RADIUS server connectivity, 802.1X port-based authentication, and related accounting statistics. It is primarily a configuration and AAA (authentication, authorization, accounting) status MIB rather than a general hardware-health module, exposing settings like RADIUS server addresses, shared secrets, and authentication/accounting statistics counters. Its monitoring value lies in software/service status: an administrator can confirm whether RADIUS authentication requests are succeeding, track accounting record counts, and verify which RADIUS servers are currently configured and reachable. It depends on the standard 802.1X/dot1x framework and typically complements the switch's core bridge/dot1x MIBs rather than replacing them. It is deployed on Netgear GSM7324 smart/managed switches in small-to-midsize enterprise networks using centralized RADIUS authentication. Engineers can download the GSM7324-RADIUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GSM7324-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear GSM7324 managed Gigabit switch

Monitoring Examples

Since no sample objects were provided for this module, specifics of exact table names cannot be confirmed from source, but a typical scenario would involve polling RADIUS server configuration and accounting-statistics objects to confirm the configured RADIUS server address and port are correct, and to detect a spike in authentication failures indicating misconfigured client credentials or an unreachable RADIUS server.

What Can Be Monitored

RADIUS server address/port configuration
802.1X authentication statistics
accounting record counters

Imported Objects

From GSM7324-REF-MIB

gsm7324

MODULE-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
gsm7324Radius	1.3.6.1.4.1.4526.1.7.8			The GSM7324 Radius MIB
agentRadiusConfigGroup	1.3.6.1.4.1.4526.1.7.8.1
U32 agentRadiusMaxTransmit	1.3.6.1.4.1.4526.1.7.8.1.1	Unsigned32	read-write	Maximum number of retransmissions of a RADIUS request packet
U32 agentRadiusTimeout	1.3.6.1.4.1.4526.1.7.8.1.2	Unsigned32	read-write	Time out duration (in seconds) before packets are retransmitted
INT agentRadiusAccountingMode	1.3.6.1.4.1.4526.1.7.8.1.3	INTEGER	read-write	Identifies if RADIUS Accounting has been enabled or not
INT agentRadiusStatsClear	1.3.6.1.4.1.4526.1.7.8.1.4	INTEGER	read-write	When set to enable(1), all Radius statistics will be reset.
I32 agentRadiusAccountingIndexNextValid	1.3.6.1.4.1.4526.1.7.8.1.5	Integer32	read-only	Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusAccountingConfigTable	1.3.6.1.4.1.4526.1.7.8.1.6		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
agentRadiusAccountingConfigEntry	1.3.6.1.4.1.4526.1.7.8.1.6.1		not-accessible	Entry consisting of configuration data for a Radius Accounting Server.
I32 agentRadiusAccountingServerIndex	1.3.6.1.4.1.4526.1.7.8.1.6.1.1	Integer32	not-accessible	Unique index of the configured RADIUS accounting server
IP agentRadiusAccountingServerAddress	1.3.6.1.4.1.4526.1.7.8.1.6.1.2	IpAddress	read-create	IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
U32 agentRadiusAccountingPort	1.3.6.1.4.1.4526.1.7.8.1.6.1.3	Unsigned32	read-write	Port number for the RADIUS accounting server. This object cannot be configured on row creation.
STR agentRadiusAccountingSecret	1.3.6.1.4.1.4526.1.7.8.1.6.1.4	DisplayString	read-write	Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
ROW agentRadiusAccountingStatus	1.3.6.1.4.1.4526.1.7.8.1.6.1.5	RowStatus	read-create
I32 agentRadiusServerIndexNextValid	1.3.6.1.4.1.4526.1.7.8.1.7	Integer32	read-only	Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusServerConfigTable	1.3.6.1.4.1.4526.1.7.8.1.8		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
agentRadiusServerConfigEntry	1.3.6.1.4.1.4526.1.7.8.1.8.1		not-accessible	Entry consisting of configuration data for a Radius Server. Creation requires setting
I32 agentRadiusServerIndex	1.3.6.1.4.1.4526.1.7.8.1.8.1.1	Integer32	not-accessible	Unique index of the configured RADIUS server
IP agentRadiusServerAddress	1.3.6.1.4.1.4526.1.7.8.1.8.1.2	IpAddress	read-create	IP Address of the configured RADIUS server. This object cannot be changed after creation.
U32 agentRadiusServerPort	1.3.6.1.4.1.4526.1.7.8.1.8.1.3	Unsigned32	read-write	Port number for the RADIUS server. This object cannot be configured on row creation.
STR agentRadiusServerSecret	1.3.6.1.4.1.4526.1.7.8.1.8.1.4	DisplayString	read-write	Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
INT agentRadiusServerPrimaryMode	1.3.6.1.4.1.4526.1.7.8.1.8.1.5	INTEGER	read-write	Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary. This object cannot be configured on row creation.
INT agentRadiusServerCurrentMode	1.3.6.1.4.1.4526.1.7.8.1.8.1.6	INTEGER	read-only	Indicate if the RADIUS server is the current server in user for authentication.
INT agentRadiusServerMsgAuth	1.3.6.1.4.1.4526.1.7.8.1.8.1.7	INTEGER	read-write	Enable or disable the message authenticator attribute for this RADIUS server. This object cannot be configured on row creation.
ROW agentRadiusServerStatus	1.3.6.1.4.1.4526.1.7.8.1.8.1.8	RowStatus	read-create

RFC description

NETGEAR ProSafe GSM7324 24-port Layer 3 managed switch MIB providing RADIUS client configuration and statistics management for authentication server integration.

Start monitoring Netgear GSM7324 managed Gigabit switch (RADIUS/802.1X AAA) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GSM7324-RADIUS-MIB

What Is GSM7324-RADIUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description