GBNDeviceSwitch-MIB

All MIBs › GBNDeviceSwitch-MIB

Organization: Greentech

Last Updated: 2000-11-02

Category: Technology: Switching/L2, Vendor: Greentech

Description: Greentech switch device MIB for managing Layer 2 switch features including ports, VLANs, and MAC tables.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GBNDeviceSwitch-MIB?

GBNDeviceSwitch-MIB is a Greentech (GBN) private enterprise MIB for managing Layer 2 Ethernet switch devices, covering core switching features such as port configuration, VLAN assignment, and MAC address table management. As a general switch device MIB it generally exposes categories of data including per-port operational status, VLAN membership, and learned MAC address entries, though specific object names were not available for this entry. Its likely monitoring value would center on hardware port status and Layer 2 forwarding state, useful for detecting down links or unexpected MAC table changes, though this cannot be confirmed without source object names. No module description or sample objects were provided, so dependency on standard MIBs like IF-MIB or BRIDGE-MIB is inferred rather than confirmed. It would typically be deployed in enterprise or SMB wiring closets using Greentech-branded Layer 2 switches for basic network connectivity. Engineers can download the GBNDeviceSwitch-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GBNDeviceSwitch-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Greentech (GBN) Layer 2 Ethernet switch

Monitoring Examples

No sample object names were provided for this MIB, so a concrete monitoring example with real identifiers cannot be constructed without inventing them; in general, an admin would expect to monitor port link state, VLAN membership, and the MAC address table, but exact object/table names require the actual MIB source.

What Can Be Monitored

port link status
VLAN configuration
MAC address table

Imported Objects

From GREENTECH-MASTER-MIB

gbnDevice

OBJECT-IDENTITY

From Q-BRIDGE-MIB

PortList
VlanIndex
dot1qStaticMulticastEntry	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
aggEntry	1.3.6.1.4.1.13464.1.2.2.1.3.1.1		not-accessible	A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator.
INT aggPort	1.3.6.1.4.1.13464.1.2.2.1.3.1.1.2	INTEGER	read-only	The MasterPort of the Aggregation.
POR aggPortListPorts	1.3.6.1.4.1.13464.1.2.2.1.3.1.1.3	PortList	read-write	The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
T/F aggRowstatus	1.3.6.1.4.1.13464.1.2.2.1.3.1.1.5	TruthValue	read-write	rowstatus of trunk.
INT aggRule	1.3.6.1.4.1.13464.1.2.2.1.3.1.1.4	INTEGER	read-write	The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link.
aggTable	1.3.6.1.4.1.13464.1.2.2.1.3.1		not-accessible	A table that contains information about every Aggregator that is associated with this System.
INT aggUnit	1.3.6.1.4.1.13464.1.2.2.1.3.1.1.1	INTEGER	read-only	The Interface Unit of the Aggregation.
bandwidthcontrolEntry	1.3.6.1.4.1.13464.1.2.2.1.12.1.1		not-accessible	Table entry for switch interface control and status information.
bandwidthcontrolTable	1.3.6.1.4.1.13464.1.2.2.1.12.1		not-accessible	A table of switch interfaces and associated properties.
INT controlPort	1.3.6.1.4.1.13464.1.2.2.1.12.1.1.1	INTEGER	read-only	the index of port.
gbnDeviceSwitch	1.3.6.1.4.1.13464.1.2.2.1			Gbn Common Enterprise MIB definition.
gbnDeviceSwitchAggregation	1.3.6.1.4.1.13464.1.2.2.1.3
gbnDeviceSwitchBandWidth	1.3.6.1.4.1.13464.1.2.2.1.12
gbnDeviceSwitchFlowAlarm	1.3.6.1.4.1.13464.1.2.2.1.7
gbnDeviceSwitchL3	1.3.6.1.4.1.13464.1.2.2.1.4
gbnDeviceSwitchLineRate	1.3.6.1.4.1.13464.1.2.2.1.9
gbnDeviceSwitchLoopTest	1.3.6.1.4.1.13464.1.2.2.1.5
gbnDeviceSwitchMirror	1.3.6.1.4.1.13464.1.2.2.1.1
gbnDeviceSwitchNewStormControl	1.3.6.1.4.1.13464.1.2.2.1.13
gbnDeviceSwitchPort	1.3.6.1.4.1.13464.1.2.2.1.2
gbnDeviceSwitchPortIsolation	1.3.6.1.4.1.13464.1.2.2.1.10
gbnDeviceSwitchQueneScheduer	1.3.6.1.4.1.13464.1.2.2.1.8
gbnDeviceSwitchSRM	1.3.6.1.4.1.13464.1.2.2.1.6
gbnDeviceSwitchStormControl	1.3.6.1.4.1.13464.1.2.2.1.11
DAT l3CreateTime	1.3.6.1.4.1.13464.1.2.2.1.4.1.1.5	DateAndTime	read-only	Create Time,such as 2004-07-29,13:30:15.0
l3Entry	1.3.6.1.4.1.13464.1.2.2.1.4.1.1		not-accessible	��оƬ��L3���˱�Ϊֻ��
IP l3IpAddress	1.3.6.1.4.1.13464.1.2.2.1.4.1.1.1	IpAddress	read-only	Ŀ��IP��ַ��Ϊ��
MAC l3NextHopMacAddress	1.3.6.1.4.1.13464.1.2.2.1.4.1.1.2	MacAddress	read-only	��һ��IP��MAC��ַ��
INT l3Port	1.3.6.1.4.1.13464.1.2.2.1.4.1.1.4	INTEGER	read-only	��ĵĳ��˿ڡ�
l3Table	1.3.6.1.4.1.13464.1.2.2.1.4.1		not-accessible	�˱�Ϊ��оƬ��L3��ݡ�
DAT l3UpdateTime	1.3.6.1.4.1.13464.1.2.2.1.4.1.1.6	DateAndTime	read-only	Update Time,such as 2004-07-29,13:30:15.0
VLA l3Vlan	1.3.6.1.4.1.13464.1.2.2.1.4.1.1.3	VlanIndex	read-only	��һ��IP��ڵ�VLAN��
STR loopTestPortno	1.3.6.1.4.1.13464.1.2.2.1.5.1	DisplayString	read-write	port bitmap:Numbers of the port to be tested. The highest bit is port 1, the second bit is port 2, and so on.
STR loopTestSuccess	1.3.6.1.4.1.13464.1.2.2.1.5.3	DisplayString	read-only	if the highest bit is 0:the port 1 loop fail, 1,the port 1 loop success, and so on.
INT loopTestType	1.3.6.1.4.1.13464.1.2.2.1.5.2	INTEGER	read-write	DURABLE: { 4 } Setting this object to 2-4 enables loop back test. Setting it to 1 disables loop back test.
POR mirroredEgrPort	1.3.6.1.4.1.13464.1.2.2.1.1.2	PortList	read-write	The egress ports which need to monitor.
POR mirroredIgrPort	1.3.6.1.4.1.13464.1.2.2.1.1.3	PortList	read-write	The ingress ports which need to monitor.
INT mirroringPort	1.3.6.1.4.1.13464.1.2.2.1.1.1	INTEGER	read-write	This port which all packets send to.
newStormControlEntry	1.3.6.1.4.1.13464.1.2.2.1.13.3.1		not-accessible	A list of storm control entries.
INT newStormControlInterface	1.3.6.1.4.1.13464.1.2.2.1.13.3.1.1	INTEGER	read-only	the storm control interface.
INT newStormControlStatus	1.3.6.1.4.1.13464.1.2.2.1.13.3.1.2	INTEGER	read-write	the status of the storm control.
newStormControlTable	1.3.6.1.4.1.13464.1.2.2.1.13.3		not-accessible	A list of storm control entries.
INT newStormControlTargetRate	1.3.6.1.4.1.13464.1.2.2.1.13.2	INTEGER	read-write	the target rate of the storm control.
INT newStormControlType	1.3.6.1.4.1.13464.1.2.2.1.13.1	INTEGER	read-write	the pack flow type of the storm control.
INT portEgressBandwidthcontrol	1.3.6.1.4.1.13464.1.2.2.1.12.1.1.2	INTEGER	read-write	Egress Speed Value of port, bandwidth control .
T/F portFlowAlarmEnable	1.3.6.1.4.1.13464.1.2.2.1.7.1.1.2	TruthValue	read-write	The enable status of the port flow alarm
portFlowAlarmEntry	1.3.6.1.4.1.13464.1.2.2.1.7.1.1		not-accessible	A list of port flow alarm.
T/F portFlowAlarmExceedStatus	1.3.6.1.4.1.13464.1.2.2.1.7.1.1.3	TruthValue	read-only	The exceed status of the port flow alarm
I32 portFlowAlarmExceedThreshold	1.3.6.1.4.1.13464.1.2.2.1.7.1.1.4	Integer32	read-write	The exceed threshold of port flow alarm.
NTF portFlowAlarmExceedTrap	1.3.6.1.4.1.13464.1.2.2.1.7.5.1			Port ingress packet rate become too big, port flow exceed alarm happen.
T/F portFlowAlarmGlobalEnable	1.3.6.1.4.1.13464.1.2.2.1.7.2	TruthValue	read-write	The global enable status of port flow alarm.
I32 portFlowAlarmNormalThreshold	1.3.6.1.4.1.13464.1.2.2.1.7.1.1.5	Integer32	read-write	The normal threshold of port flow alarm.
NTF portFlowAlarmNormalTrap	1.3.6.1.4.1.13464.1.2.2.1.7.5.2			Port ingress packet rate become normal, port flow normal alarm happen.
I32 portFlowAlarmPort	1.3.6.1.4.1.13464.1.2.2.1.7.1.1.1	Integer32	not-accessible	The port number.
portFlowAlarmTable	1.3.6.1.4.1.13464.1.2.2.1.7.1		not-accessible	A Table of port flow alarm.
portFlowAlarmTrap	1.3.6.1.4.1.13464.1.2.2.1.7.5
INT portIngressBandwidthcontrol	1.3.6.1.4.1.13464.1.2.2.1.12.1.1.3	INTEGER	read-write	Ingress Speed Value of port, bandwidth control .
POR portIsolationDownLinkPorts	1.3.6.1.4.1.13464.1.2.2.1.10.1.1	PortList	read-write	port isolation down link portlist
portIsolationGroup	1.3.6.1.4.1.13464.1.2.2.1.10.1
INT portNumber	1.3.6.1.4.1.13464.1.2.2.1.2.1.1.1	INTEGER	read-only	the index of port.
INT portType	1.3.6.1.4.1.13464.1.2.2.1.2.1.1.2	INTEGER	read-only	�˿��ͣ�1Ϊ��ڣ�2Ϊ10/100M��ڣ�3Ϊ100M��ģ��ˣ� 4Ϊ100M��ģ��ˣ�5Ϊ1000M��ģ��ˣ�6Ϊ1000M��ģ��ˣ�7Ϊ1000M��ڣ� 9Ϊ4/8�˿ڰ��׵�ģ˫�˹�ڣ�10Ϊ4/8�˿ڰ��׶�ģ˫�˹��1310nm�� 11Ϊ4/8�˿ڰ��׶�ģ˫�˹��850nm ��12Ϊ4/8�˿ڰ��׵�ģ��˫��ڷ��䲨��1550nm�� 13Ϊ4/8�˿ڰ��׵�ģ��˫��ڷ��䲨��1310nm
portTypeEntry	1.3.6.1.4.1.13464.1.2.2.1.2.1.1		not-accessible	Table entry for switch interface control and status information.
portTypeTable	1.3.6.1.4.1.13464.1.2.2.1.2.1		not-accessible	A table of switch interfaces and associated properties.
qosLineRateEntry	1.3.6.1.4.1.13464.1.2.2.1.9.1.1		not-accessible	A list of line-rate QOS entries.
INT qosLineRateInterface	1.3.6.1.4.1.13464.1.2.2.1.9.1.1.1	INTEGER	read-only	the line rate interface.
qosLineRateTable	1.3.6.1.4.1.13464.1.2.2.1.9.1		not-accessible	A list of line-rate QOS entries.
INT qosLineRateTargetRate	1.3.6.1.4.1.13464.1.2.2.1.9.1.1.2	INTEGER	read-write	the target rate of the line-rate QOS.
INT qosPriority0Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.1	INTEGER	read-write	Remap of 0 priority.
INT qosPriority1Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.2	INTEGER	read-write	Remap of 1 priority.
INT qosPriority2Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.3	INTEGER	read-write	Remap of 2 priority.
INT qosPriority3Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.4	INTEGER	read-write	Remap of 3 priority.
INT qosPriority4Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.5	INTEGER	read-write	Remap of 4 priority.
INT qosPriority5Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.6	INTEGER	read-write	Remap of 5 priority.
INT qosPriority6Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.7	INTEGER	read-write	Remap of 6 priority.
INT qosPriority7Remap	1.3.6.1.4.1.13464.1.2.2.1.8.2.8	INTEGER	read-write	Remap of 7 priority.
qosPriorityRemapGroup	1.3.6.1.4.1.13464.1.2.2.1.8.2
INT qosPriorityRemapStatus	1.3.6.1.4.1.13464.1.2.2.1.8.2.9	INTEGER	read-write	Priority remap status: enable, disable
qosQueueSchedulerGroup	1.3.6.1.4.1.13464.1.2.2.1.8.1
INT qosQueueSchedulerMode	1.3.6.1.4.1.13464.1.2.2.1.8.1.6	INTEGER	read-write	queue scheduler mode: strict priority, weighted round robin
INT qosWrrMaxDelayValue	1.3.6.1.4.1.13464.1.2.2.1.8.1.5	INTEGER	read-write	the maximum allowable latency for packet transmission on the priorest COS
INT qosWrrQueue1Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.1	INTEGER	read-write	Weight of 1th queue(%).
INT qosWrrQueue2Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.2	INTEGER	read-write	Weight of 2th queue(%).
INT qosWrrQueue3Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.3	INTEGER	read-write	Weight of 3th queue(%).
INT qosWrrQueue4Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.4	INTEGER	read-write	Weight of 4th queue(%).
INT qosWrrQueue5Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.7	INTEGER	read-write	Weight of 5th queue(%).
INT qosWrrQueue6Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.8	INTEGER	read-write	Weight of 6th queue(%).
INT qosWrrQueue7Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.9	INTEGER	read-write	Weight of 7th queue(%).
INT qosWrrQueue8Weight	1.3.6.1.4.1.13464.1.2.2.1.8.1.10	INTEGER	read-write	Weight of 8th queue(%).
INT srmHardwareDEFCPU	1.3.6.1.4.1.13464.1.2.2.1.6.2	INTEGER	read-write	The DEF routes goes to CPU.
INT srmHardwareEnable	1.3.6.1.4.1.13464.1.2.2.1.6.1	INTEGER	read-write	Add network routes to hardware table or not.Default is enable.
stormControlEntry	1.3.6.1.4.1.13464.1.2.2.1.11.1.1		not-accessible	A list of storm control entries.
INT stormControlInterface	1.3.6.1.4.1.13464.1.2.2.1.11.1.1.1	INTEGER	read-only	the storm control interface.
ROW stormControlRowStatus	1.3.6.1.4.1.13464.1.2.2.1.11.1.1.4	RowStatus	read-write	row status of the storm control
stormControlTable	1.3.6.1.4.1.13464.1.2.2.1.11.1		not-accessible	A list of storm control entries.
INT stormControlTargetRate	1.3.6.1.4.1.13464.1.2.2.1.11.1.1.3	INTEGER	read-write	the target rate of the storm control.
INT stormControlType	1.3.6.1.4.1.13464.1.2.2.1.11.1.1.2	INTEGER	read-only	the pack flow type of the storm control.

RFC description

Greentech network switch management including port mirroring, aggregation, VLAN configuration, QoS, and storm control.

Start monitoring Greentech (GBN) managed switch (core L2 switching) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GBNDeviceSwitch-MIB

What Is GBNDeviceSwitch-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description