G6-CLI-MIB

All MIBs › G6-CLI-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for CLI session management and command-line interface configuration parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-CLI-MIB?

G6-CLI-MIB is a MICROSENS private MIB for its Generation 6 (G6) Ethernet switch family, covering configuration of the device's command-line interface subsystem. It exposes settings such as whether Telnet and SSH access are enabled, the CLI prompt source and welcome message, script/automation mode, auto text expansion, and inactivity timeout, rather than traffic or environmental data. Its monitoring relevance is mainly around software configuration and management-plane status: confirming whether remote CLI access methods (Telnet, SSH) are enabled or disabled is a basic security posture check, and the inactivity timeout setting affects how long idle management sessions remain open. As a vendor private-enterprise MIB it has no stated dependency on other MIBs beyond the standard SNMP framework. It is deployed alongside MICROSENS' broader G6 switch MIB set in environments managing fleets of G6 Ethernet switches via SNMP alongside CLI/SSH access, and a G6-CLI-MIB download is included in MICROSENS' standard MIB package for administrators auditing these settings.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-CLI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 Generation 6 Ethernet switch

Monitoring Examples

An administrator auditing management-plane security on a G6 switch would check cliEnableTelnet and cliEnableSsh to confirm insecure Telnet access has been disabled in favor of SSH, and would review cliInactivityTimeout to ensure idle CLI sessions are closed within policy. An unexpectedly enabled cliEnableTelnet flag or a disabled cliInactivityTimeout would flag a configuration drift from a hardened baseline.

What Can Be Monitored

Telnet access enabled/disabled
SSH access enabled/disabled
CLI inactivity timeout
CLI script/automation mode
CLI prompt and welcome message configuration

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
management	1.3.6.1.4.1.3181.10.6.3			Microsens private MIB for Generation 6 Ethernet Switches
cli	1.3.6.1.4.1.3181.10.6.3.62
INT cliEnableTelnet	1.3.6.1.4.1.3181.10.6.3.62.1	INTEGER	read-write	Enable TELNET for CLI access. Note: Disable TELNET and enable only SSH when only secure access is desired.
INT cliEnableSsh	1.3.6.1.4.1.3181.10.6.3.62.2	INTEGER	read-write	Enable SSH for CLI access. Note: When disabled also the SFTP file transfer server is disabled.
INT cliPromptSource	1.3.6.1.4.1.3181.10.6.3.62.3	INTEGER	read-write	Decides which prompt is shown.
STR cliWelcomeMessage	1.3.6.1.4.1.3181.10.6.3.62.4	DisplayString	read-write	This welcome message is displayed prior to the login prompt.
STR cliUserPrompt	1.3.6.1.4.1.3181.10.6.3.62.5	DisplayString	read-write	User definable prompt string.
INT cliColors	1.3.6.1.4.1.3181.10.6.3.62.6	INTEGER	read-write	Color enhances readability but may not work with every terminal. Disable function when funny character appear.
INT cliScriptMode	1.3.6.1.4.1.3181.10.6.3.62.7	INTEGER	read-write	When set the output will include the the full command which permits to pipe the output into a script file.
INT cliAutoTextExpansion	1.3.6.1.4.1.3181.10.6.3.62.8	INTEGER	read-write	When enabled typing characters will automatically be expanded on the command line for quicker access. This may conflict with batch file processing.
INT cliDontAskQuestions	1.3.6.1.4.1.3181.10.6.3.62.9	INTEGER	read-write	When enabled security questions are avoided for experienced operators.
I32 cliInactivityTimeout	1.3.6.1.4.1.3181.10.6.3.62.10	Integer32	read-write	An unattended CLI terminal logs off automatically after specified seconds. Use 0 to disable timeout.
INT cliMicroscriptTracing	1.3.6.1.4.1.3181.10.6.3.62.11	INTEGER	read-write	When enabled the program flow of each running microscript or app is traced. The resulting trace files are accessible under ftp folder script_logs. This feature may be used to debug scripts and should otherwise be disabled.
INT cliNamedStatusSelection	1.3.6.1.4.1.3181.10.6.3.62.12	INTEGER	read-write	When enabled dynamic status tables can comfortably be referenced by name. Otherwise a numerical index is used.
INT cliLiveHelp	1.3.6.1.4.1.3181.10.6.3.62.13	INTEGER	read-write	When enabled a help text is automatically displayed while browsing through the CLI commands.
favoritesTable	1.3.6.1.4.1.3181.10.6.3.62.14		not-accessible	This table may be for a customized the favorites display. The commands are displayed in the entered order using the Favorites command.
favoritesEntry	1.3.6.1.4.1.3181.10.6.3.62.14.1		not-accessible
INT favoritesIndex	1.3.6.1.4.1.3181.10.6.3.62.14.1.1	INTEGER	not-accessible	Automatically generated
STR favoritesCommandLine	1.3.6.1.4.1.3181.10.6.3.62.14.1.2	DisplayString	read-write	Enter full command as it would be typed on the CLI console. This may also include calling scripts using runscriptfile = file syntax.
I32 cliLastInstance	1.3.6.1.4.1.3181.10.6.3.62.100	Integer32	read-only	Number of times a CLI was started. Note: this value wraps at 255.
scriptStatusTable	1.3.6.1.4.1.3181.10.6.3.62.101		not-accessible	Statistics about script file execution. Note that multiple CLI instances or command line invokations add up in the same statistics.
scriptStatusEntry	1.3.6.1.4.1.3181.10.6.3.62.101.1		not-accessible
INT scriptStatusIndex	1.3.6.1.4.1.3181.10.6.3.62.101.1.1	INTEGER	not-accessible	Automatically generated
STR scriptStatusLastScriptName	1.3.6.1.4.1.3181.10.6.3.62.101.1.2	DisplayString	read-only	Name of last CLI script executed.
U32 scriptStatusExecutedFiles	1.3.6.1.4.1.3181.10.6.3.62.101.1.3	Unsigned32	read-only	Counts each time a CLI script is executed.
U32 scriptStatusExecutedCommands	1.3.6.1.4.1.3181.10.6.3.62.101.1.4	Unsigned32	read-only	Counts each command executed within the current/last script file. The value is reset each time a script starts executing.
U32 scriptStatusCommandErrors	1.3.6.1.4.1.3181.10.6.3.62.101.1.5	Unsigned32	read-only	Counts each executed command within the current/last script file that returned an error code. The value is reset each time a script starts executing.
compareStatusTable	1.3.6.1.4.1.3181.10.6.3.62.102		not-accessible	Displays status results of the % operator to compare parameter or status to a set value.
compareStatusEntry	1.3.6.1.4.1.3181.10.6.3.62.102.1		not-accessible
INT compareStatusIndex	1.3.6.1.4.1.3181.10.6.3.62.102.1.1	INTEGER	not-accessible	Automatically generated
STR compareStatusLastDotstring	1.3.6.1.4.1.3181.10.6.3.62.102.1.2	DisplayString	read-only	Copy of last dot_string tested.
INT compareStatusMatched	1.3.6.1.4.1.3181.10.6.3.62.102.1.3	INTEGER	read-only	Displays True when the last comparision matched.
U32 compareStatusItemsCompared	1.3.6.1.4.1.3181.10.6.3.62.102.1.4	Unsigned32	read-only	Counts the number of items tested. May be more than 1 when wildcards are used.
U32 compareStatusItemsDifferent	1.3.6.1.4.1.3181.10.6.3.62.102.1.5	Unsigned32	read-only	Counts the number of items the were different. May be more than 0 when wildcards are used.
scriptMonitorTable	1.3.6.1.4.1.3181.10.6.3.62.103		not-accessible	Displays status results of the % operator to compare parameter or status to a set value.
scriptMonitorEntry	1.3.6.1.4.1.3181.10.6.3.62.103.1		not-accessible
INT scriptMonitorIndex	1.3.6.1.4.1.3181.10.6.3.62.103.1.1	INTEGER	not-accessible	Automatically generated
INT scriptMonitorState	1.3.6.1.4.1.3181.10.6.3.62.103.1.2	INTEGER	read-only	Indicates if this record displays a currently running script or a history entry of a previously running script which has ended by now.
STR scriptMonitorScriptName	1.3.6.1.4.1.3181.10.6.3.62.103.1.3	DisplayString	read-only	Name of the script
STR scriptMonitorLaunchedBy	1.3.6.1.4.1.3181.10.6.3.62.103.1.4	DisplayString	read-only	Name of event or or other means of starting
U32 scriptMonitorCliInstance	1.3.6.1.4.1.3181.10.6.3.62.103.1.5	Unsigned32	read-only	Index identifying the executing cli instance
C32 scriptMonitorLaunchTimeStamp	1.3.6.1.4.1.3181.10.6.3.62.103.1.6	Counter32	read-only	Indicates the time when this record was created and the time this script was started.
C32 scriptMonitorRunTime	1.3.6.1.4.1.3181.10.6.3.62.103.1.7	Counter32	read-only	Indicates how long the script has been executing. For history entries indicates the last run time taken.
STR scriptMonitorCurrentFile	1.3.6.1.4.1.3181.10.6.3.62.103.1.8	DisplayString	read-only	Indicates the currently executed script file.
STR scriptMonitorCurrentSubroutine	1.3.6.1.4.1.3181.10.6.3.62.103.1.9	DisplayString	read-only	Indicates the currently executed subroutine.
U32 scriptMonitorLinesExecuted	1.3.6.1.4.1.3181.10.6.3.62.103.1.10	Unsigned32	read-only	Counts how many script lines were executed.
U32 scriptMonitorCurrentLineNumber	1.3.6.1.4.1.3181.10.6.3.62.103.1.11	Unsigned32	read-only	This gives a snapshot of the currently executed line of code.
U32 scriptMonitorScriptErrors	1.3.6.1.4.1.3181.10.6.3.62.103.1.12	Unsigned32	read-only	In real time counts errors during script execution.
instancesTable	1.3.6.1.4.1.3181.10.6.3.62.104		not-accessible	This table indicates how many CLI are currently running and for which operator and reason.
instancesEntry	1.3.6.1.4.1.3181.10.6.3.62.104.1		not-accessible
INT instancesIndex	1.3.6.1.4.1.3181.10.6.3.62.104.1.1	INTEGER	not-accessible	Automatically generated
STR instancesUserName	1.3.6.1.4.1.3181.10.6.3.62.104.1.2	DisplayString	read-only	User that is logged in.
STR instancesCommandLine	1.3.6.1.4.1.3181.10.6.3.62.104.1.3	DisplayString	read-only	Displays optional command line parameter or script names that are executed by this cli instance.
U32 instancesProcessId	1.3.6.1.4.1.3181.10.6.3.62.104.1.4	Unsigned32	read-only	Indicates the process id for debugging purposes. 0 is no process.
C32 instancesLaunchTimeStamp	1.3.6.1.4.1.3181.10.6.3.62.104.1.5	Counter32	read-only	Indicates the time when this cli was started.

RFC description

Manages CLI parameters including Telnet, SSH, and prompt settings for Microsens G6 switches.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (CLI/Telnet/SSH management access) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-CLI-MIB

What Is G6-CLI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description