All MIBs › FD-OLT-MIB › pppoePlusEnable
pppoePlusEnable
Module: FD-OLT-MIB
OID (symbolic): FD-OLT-MIB::pppoePlusEnable
OID (numeric): 1.3.6.1.4.1.34592.1.3.3.11.1.1.1
Node type: OBJECT-TYPE
Type: OperSwitch
Access: read-write
Description:
Description. Enable/Disable pppoe+ feature, when enabled PON card firmware will sniff each pppoe require frames sent from user divice and then add cared info (normal info will be onu ID,onu port, vlan ID) to the protocol specified frame field.
This feature is usefull when exact user identify is needed. Disable OLT is essential before set this feature.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.34592.1.3.3.11.1.1.1 snmpwalk -v2c -c public <target> FD-OLT-MIB::pppoePlusEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.34592.1.3.3.11.1.1.1.1 snmpget -v2c -c public <target> FD-OLT-MIB::pppoePlusEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.34592.1.3.3.11.1.1.1.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.34592 | vendor | CDATA-COMMON-SMI |
| 1.3.6.1.4.1.34592.1 | ipProduct | CDATA-COMMON-SMI |
| 1.3.6.1.4.1.34592.1.3 | epon | CDATA-COMMON-SMI |
| 1.3.6.1.4.1.34592.1.3.3 | fdOlt | FD-OLT-MIB |
| 1.3.6.1.4.1.34592.1.3.3.11 | accessUserIdentifer | FD-OLT-MIB |
| 1.3.6.1.4.1.34592.1.3.3.11.1 | accessUserIdentiferConfigTable | FD-OLT-MIB |
| 1.3.6.1.4.1.34592.1.3.3.11.1.1 | accessUserIdentiferConfigEntry | FD-OLT-MIB |
| 1.3.6.1.4.1.34592.1.3.3.11.1.1.1 | pppoePlusEnable | FD-OLT-MIB |