FASTPATH-ROUTING6-MIB

All MIBs › FASTPATH-ROUTING6-MIB

Organization: Broadcom Corporation

Last Updated: 2007-05-23

Category: Technology: IPv6, Vendor: Broadcom

Description: Broadcom FastPath private MIB for IPv6 routing configuration and statistics on FastPath-based network switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FASTPATH-ROUTING6-MIB?

FASTPATH-ROUTING6-MIB is a Broadcom Corporation proprietary MIB (FastPath switch reference software, built on BROADCOM-REF-MIB) configuring IPv6 routing. Its objects cover a global IPv6-routing mode, a per-interface table (MTU, DAD transmits, link-local-only flag, ICMP-unreachables flag), a router-advertisement table (per-interface suppress mode, max advertisement interval, advertisement lifetime, neighbor-solicit interval, reachable time, managed/other flags), and an address-prefix table (prefix, length, on-link/autonomous flags, advertised preferred lifetime). As a configuration MIB it lets an administrator confirm IPv6 router-advertisement and prefix configuration on a Broadcom FastPath-based switch. It is deployed on switching equipment built on Broadcom FastPath reference software (IPv6 routing). Engineers can download the FASTPATH-ROUTING6-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FASTPATH-ROUTING6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Switching equipment built on Broadcom FastPath reference software (IPv6 routing)

Monitoring Examples

An administrator checks agentIpv6RouterAdvertisementSuppressMode and agentIpv6AddrPrefixTable to confirm IPv6 router-advertisement configuration on a Broadcom FastPath-based switch.

What Can Be Monitored

IPv6 router-advertisement and prefix configuration

Imported Objects

From BROADCOM-REF-MIB

fastPath

OBJECT-IDENTITY

From IPV6-TC

Ipv6Address
Ipv6AddressIfIdentifier
Ipv6AddressPrefix
Ipv6IfIndex
Ipv6IfIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowPointer
RowStatus
TimeStamp
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathRoutingIpv6	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30			The Broadcom Private MIB for FastPath Ipv6 Routing
agentIpv6Group	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1
INT agentIpv6RoutingMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.1	INTEGER	read-write	Administratively enables/disables ipv6 unicast routing on the switch.
agentIpv6InterfaceTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2		not-accessible
agentIpv6InterfaceEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1		not-accessible
I32 agentIpv6InterfaceIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.1	Integer32	read-only	The IfIndex associated with this instance.
U32 agentIpv6InterfaceMtuValue	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.2	Unsigned32	read-write	Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU.
I32 agentIpv6InterfaceDadTransmits	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.3	Integer32	read-write	Configures the dad transmits value for this interface.
INT agentIpv6InterfaceLinkLocalOnly	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.4	INTEGER	read-write	When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used.
INT agentIpv6InterfaceIcmpUnreachables	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.5	INTEGER	read-write	If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface.
agentIpv6RouterAdvertisementTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3		not-accessible	There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
agentIpv6RouterAdvertisementEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1		not-accessible
I32 agentIpv6RouterAdvertisementIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.1	Integer32	read-only	Interface Number to configure Router Advertisement on.
INT agentIpv6RouterAdvertisementSuppressMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.2	INTEGER	read-write	Enable or disable router advertisement suppression on the interface.
I32 agentIpv6RouterAdvertisementMaxAdvertisementInterval	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.3	Integer32	read-write	Maximum time allowed between sending router advertisements from the interface.
I32 agentIpv6RouterAdvertisementAdvertisementLifetime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.4	Integer32	read-write	Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.
I32 agentIpv6RouterAdvertisementNbrSolicitInterval	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.5	Integer32	read-write	Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
I32 agentIpv6RouterAdvertisementReachableTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.6	Integer32	read-write	Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
INT agentIpv6RouterAdvertisementManagedFlag	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.7	INTEGER	read-write	Value of managed config field of router advertisement sent from the interface.
INT agentIpv6RouterAdvertisementOtherFlag	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.8	INTEGER	read-write	Value of other config field of router advertisement sent from the interface.
agentIpv6AddrPrefixTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4		not-accessible	The list of IPv6 address prefixes of IPv6 interfaces.
agentIpv6AddrPrefixEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1		not-accessible	An interface entry containing objects of a particular IPv6 address prefix.
ADR agentIpv6AddrPrefix	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.1	Ipv6AddressPrefix	not-accessible	The prefix associated with the this interface.
INT agentIpv6AddrPrefixLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.2	INTEGER	not-accessible	The length of the prefix (in bits).
T/F agentIpv6AddrPrefixOnLinkFlag	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.3	TruthValue	read-write	This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
T/F agentIpv6AddrPrefixAutonomousFlag	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.4	TruthValue	read-write	Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
U32 agentIpv6AddrPrefixAdvPreferredLifetime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.5	Unsigned32	read-write	It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
U32 agentIpv6AddrPrefixAdvValidLifetime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.6	Unsigned32	read-write	It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
agentIpv6AddrTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5		not-accessible	The table of addressing information relevant to this node's interface addresses.
agentIpv6AddrEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1		not-accessible	The addressing information for one of this node's interface addresses.
ADR agentIpv6AddrAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.1	Ipv6Address	not-accessible	The IPv6 address to which this entry's addressing information pertains.
INT agentIpv6AddrPfxLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.2	INTEGER	read-create	The length of the prefix (in bits) associated with the IPv6 address of this entry.
T/F agentIpv6AddrEui64Flag	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.3	TruthValue	read-create	This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.
ROW agentIpv6AddrStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.4	RowStatus	read-create	Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
agentIpv6StaticRouteTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6		not-accessible	IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
agentIpv6StaticRouteEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1		not-accessible	A routing entry.
ADR agentIpv6StaticRouteDest	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.1	Ipv6AddressPrefix	not-accessible	The destination IPv6 address of this route. This object may not take a Multicast address value.
INT agentIpv6StaticRoutePfxLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.2	INTEGER	not-accessible	Indicates the prefix length of the destination address.
IPV agentIpv6StaticRouteIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.3	Ipv6IfIndexOrZero	not-accessible	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero.
ADR agentIpv6StaticRouteNextHop	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.4	Ipv6Address	not-accessible	The address of the next system en route.
INT agentIpv6StaticRoutePreference	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.5	INTEGER	read-create	The routing preference metric for this route. A lower value is more preferred.
ROW agentIpv6StaticRouteStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.6	RowStatus	read-create	Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface.
agentIpv6ServicePortGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7
agentIpv6ServicePortPrefixTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1		not-accessible	IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
agentIpv6ServicePortPrefixEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1		not-accessible	An IPv6 Service Port Prefix entry.
U32 agentIpv6ServicePortPrefixIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1.1	Unsigned32	not-accessible	The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
ADR agentIpv6ServicePortPrefix	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1.2	Ipv6Address	read-only	The Ipv6 Prefix Address configured on the Service Port.
U32 agentIpv6ServicePortPrefixLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1.3	Unsigned32	read-only	The length of the IPv6 Prefix Address.
agentIpv6ServicePortDefaultRouterTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2		not-accessible	IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
agentIpv6ServicePortDefaultRouterEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2.1		not-accessible	An IPv6 Service Port Default Router entry.
U32 agentIpv6ServicePortDefaultRouterIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2.1.1	Unsigned32	not-accessible	The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
ADR agentIpv6ServicePortDefaultRouter	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2.1.2	Ipv6Address	read-only	The Address of the IPv6 Default Router configured on the Service Port.
agentIpv6ServicePortNbrTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3		not-accessible	IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
agentIpv6ServicePortNbrEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1		not-accessible	An IPv6 Service Port Neighbor entry.
ADR agentIpv6ServicePortNbrAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.1	Ipv6Address	not-accessible	The Ipv6 Address of a neighbor switch visible to the Service Port.
MAC agentIpv6ServicePortNbrPhysAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.2	MacAddress	read-only	The MacAddress of the neighboring switch.
INT agentIpv6ServicePortNbrState	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.3	INTEGER	read-only	The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status.
TIM agentIpv6ServicePortNbrUpdated	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.4	TimeStamp	read-only	The last sysUpTime that this neighbor has been updated.
T/F agentIpv6ServicePortNbrIsRouter	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.5	TruthValue	read-only	Returns true(1) if the neighbor machine is a router, false(2) otherwise.
agentIpv6IcmpControlGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.8
I32 agentIpv6IcmpRateLimitInterval	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.8.1	Integer32	read-write	Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
I32 agentIpv6IcmpRateLimitBurstSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.8.2	Integer32	read-write	Specifies the number of tokens to be placed after timeout.

RFC description

Broadcom FastPath MIB for IPv6 unicast routing configuration and management on network switches.

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (IPv6 routing/RA config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FASTPATH-ROUTING6-MIB

What Is FASTPATH-ROUTING6-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description