F3-AMP-MIB

All MIBs › F3-AMP-MIB

Organization: ADVA Optical Networking

Last Updated: 2012-09-31

Category: Domain: Optical Transport, Domain: Telco/Transport, Technology: Optical Transport, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Amplifier management, monitoring optical amplifier gain, output power, and alarms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-AMP-MIB?

F3-AMP-MIB is an ADVA Optical Networking proprietary MIB implementing AMP (Automatic Management Provisioning), which lets an FSP150CM/CC (F3) network element auto-discover and provision management connectivity to a remote peer. Its configuration table, keyed by index, records role, protocol, enable, port, status, and detailed remote-system detail — name, IP address/mask/default gateway, SNMPv1 interface name, source-address type/interface, and remote-tunnel detail (index, name, type, IP address/mask, VLAN ID, optional S-VLAN ID, RIPv2-packets-enabled flag, and class of service). As a configuration/status MIB it lets an administrator confirm AMP has correctly provisioned management connectivity — IP addressing and VLAN — to a remote F3 network element. It is deployed on ADVA Optical Networking FSP150CM/CC (F3) platforms. Engineers can download the F3-AMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-AMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA Optical Networking FSP150CM/CC (F3) platforms

Monitoring Examples

An administrator checks f3AmpConfigStatus and f3AmpConfigRemSysIpAddr to confirm AMP successfully auto-provisioned management connectivity to a newly-added remote ADVA F3 network element.

What Can Be Monitored

AMP auto-provisioning status and remote-system configuration

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

VlanId

From CM-IP-MIB

IpManagementTunnelEncapsulationType
IpManagementTunnelType
IpSourceAddrType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3AMPMIB	1.3.6.1.4.1.2544.1.12.24			This module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3AmpConfigObjects	1.3.6.1.4.1.2544.1.12.24.1
f3AmpConfigTable	1.3.6.1.4.1.2544.1.12.24.1.1		not-accessible	A list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes.
f3AmpConfigEntry	1.3.6.1.4.1.2544.1.12.24.1.1.1		not-accessible	A conceptual row in the f3AmpConfigTable.
I32 f3AmpConfigIndex	1.3.6.1.4.1.2544.1.12.24.1.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this AMP Config within the System.
AMP f3AmpConfigRole	1.3.6.1.4.1.2544.1.12.24.1.1.1.2	AMPRole	read-create	Configures AMP instance to be either Client or Server.
AMP f3AmpConfigProtocol	1.3.6.1.4.1.2544.1.12.24.1.1.1.3	AMPProtocol	read-create	Configures protocol over which AMP message will be transported.
T/F f3AmpConfigEnabled	1.3.6.1.4.1.2544.1.12.24.1.1.1.4	TruthValue	read-create	Enables or Disables AMP on a Port.
NUM f3AmpConfigPort	1.3.6.1.4.1.2544.1.12.24.1.1.1.5	VariablePointer	read-create	Port on which AMP Server or Client will operate. This port will transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex or cmEthernetNetPortIndex.
AMP f3AmpConfigStatus	1.3.6.1.4.1.2544.1.12.24.1.1.1.6	AMPStatus	read-only	The Status of AMP.
STR f3AmpConfigRemSysName	1.3.6.1.4.1.2544.1.12.24.1.1.1.7	DisplayString	read-create	When f3AmpConfigRole is 'server' this object specifies sysName which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the sysName value which was received from the AMP Server.
IP f3AmpConfigRemSysIpAddr	1.3.6.1.4.1.2544.1.12.24.1.1.1.8	IpAddress	read-create	When f3AmpConfigRole is 'server' this object specifies System IP address which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP address value which was received from the AMP Server.
IP f3AmpConfigRemSysIpMask	1.3.6.1.4.1.2544.1.12.24.1.1.1.9	IpAddress	read-create	When f3AmpConfigRole is 'server' this object specifies System IP mask which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP mask value which was received from the AMP Server.
IP f3AmpConfigRemSysDefGateway	1.3.6.1.4.1.2544.1.12.24.1.1.1.10	IpAddress	read-create	When f3AmpConfigRole is 'server' this object specifies System Default Gateway which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Default Gateway value which was received from the AMP Server.
STR f3AmpConfigRemSysSNMPV1IfName	1.3.6.1.4.1.2544.1.12.24.1.1.1.11	DisplayString	read-only	When f3AmpConfigRole is 'server' this object specifies System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object shows the System SNMPV1 Interface Name value which was received from the AMP Server.
IPS f3AmpConfigRemSysSrcIpAddrType	1.3.6.1.4.1.2544.1.12.24.1.1.1.12	IpSourceAddrType	read-only	When f3AmpConfigRole is 'server' this object specifies System Source IP Address type which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Source IP Address Type value which was received from the AMP Server.
STR f3AmpConfigRemSysSrcIpAddrIfName	1.3.6.1.4.1.2544.1.12.24.1.1.1.13	DisplayString	read-only	When f3AmpConfigRole is 'server' this object specifies System Source IP Interface name sent in an AMP message to be configured on an AMP Client device. When f3AmpConfigRole is 'client' this object shows the SystemSource IP Interface value which was received from the AMP Server.
I32 f3AmpConfigRemTunnelIndex	1.3.6.1.4.1.2544.1.12.24.1.1.1.14	Integer32	read-create	When f3AmpConfigRole is 'server' this object specifies index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the index of a Management Tunnel which was received from the AMP Server.
STR f3AmpConfigRemTunnelName	1.3.6.1.4.1.2544.1.12.24.1.1.1.15	DisplayString	read-create	When f3AmpConfigRole is 'server' this object specifies a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel name which was received from the AMP Server.
IPM f3AmpConfigRemTunnelType	1.3.6.1.4.1.2544.1.12.24.1.1.1.16	IpManagementTunnelType	read-create	When f3AmpConfigRole is 'server' this object specifies a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel type value which was received from the AMP Server.
IP f3AmpConfigRemTunnelIpAddr	1.3.6.1.4.1.2544.1.12.24.1.1.1.17	IpAddress	read-create	When f3AmpConfigRole is 'server' this object specifies IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Address of a Management Tunnel which was received from the AMP Server.
IP f3AmpConfigRemTunnelIpMask	1.3.6.1.4.1.2544.1.12.24.1.1.1.18	IpAddress	read-create	When f3AmpConfigRole is 'server' this object specifies IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Mask of a Management Tunnel which was received from the AMP Server.
VLA f3AmpConfigRemTunnelVlanId	1.3.6.1.4.1.2544.1.12.24.1.1.1.19	VlanId	read-create	When f3AmpConfigRole is 'server' this object specifies VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the VlanId of a Management Tunnel which was received from the AMP Server.
VLA f3AmpConfigRemTunnelSVlanId	1.3.6.1.4.1.2544.1.12.24.1.1.1.20	VlanId	read-create	When f3AmpConfigRole is 'server' this object specifies S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the S-TAG VlanId of a Management Tunnel which was received from the AMP Server.
T/F f3AmpConfigRemTunnelSVlanIdEnabled	1.3.6.1.4.1.2544.1.12.24.1.1.1.21	TruthValue	read-create	When f3AmpConfigRole is 'server' this object specifies a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel S-TAG VlanId Enabled value which was received from the AMP Server.
T/F f3AmpConfigRemTunnelRip2PktsEnabled	1.3.6.1.4.1.2544.1.12.24.1.1.1.22	TruthValue	read-create	When f3AmpConfigRole is 'server' this object specifies a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel RIP2 Packates Enabled value which was received from the AMP Server.
I32 f3AmpConfigRemTunnelCOS	1.3.6.1.4.1.2544.1.12.24.1.1.1.23	Integer32	read-create	When f3AmpConfigRole is 'server' this object specifies COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the COS of a Management Tunnel which was received from the AMP Server.
U32 f3AmpConfigRemTunnelCIR	1.3.6.1.4.1.2544.1.12.24.1.1.1.24	Unsigned32	read-create	When f3AmpConfigRole is 'server' this object specifies CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the CIR of a Management Tunnel which was received from the AMP Server.
U32 f3AmpConfigRemTunnelEIR	1.3.6.1.4.1.2544.1.12.24.1.1.1.25	Unsigned32	read-create	When f3AmpConfigRole is 'server' this object specifies EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the EIR of a Management Tunnel which was received from the AMP Server.
U32 f3AmpConfigRemTunnelBufferSize	1.3.6.1.4.1.2544.1.12.24.1.1.1.26	Unsigned32	read-create	When f3AmpConfigRole is 'server' this object specifies Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Buffer Size of a Management Tunnel which was received from the AMP Server.
IPM f3AmpConfigRemTunnelEncapType	1.3.6.1.4.1.2544.1.12.24.1.1.1.27	IpManagementTunnelEncapsulationType	read-create	When f3AmpConfigRole is 'server' this object specifies Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Encapsulation Type of a Management Tunnel which was received from the AMP Server.
I32 f3AmpConfigRemTunnelMtu	1.3.6.1.4.1.2544.1.12.24.1.1.1.28	Integer32	read-create	When f3AmpConfigRole is 'server' this object specifies MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the MTU of a Management Tunnel which was received from the AMP Server.
AMP f3AmpConfigAction	1.3.6.1.4.1.2544.1.12.24.1.1.1.29	AMPConfigAction	read-create	This object may be used to initiate user action on this AMP Config instance.
STO f3AmpConfigStorageType	1.3.6.1.4.1.2544.1.12.24.1.1.1.30	StorageType	read-create	The type of storage configured for this entry.
ROW f3AmpConfigRowStatus	1.3.6.1.4.1.2544.1.12.24.1.1.1.31	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AmpConfigRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AmpConfigRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3AmpStatsObjects	1.3.6.1.4.1.2544.1.12.24.2
f3AmpStatsTable	1.3.6.1.4.1.2544.1.12.24.2.1		not-accessible	A list of entries corresponding to Automatic Management Provisioning Statistics
f3AmpStatsEntry	1.3.6.1.4.1.2544.1.12.24.2.1.1		not-accessible	A conceptual row in the f3AmpStatsTable.
U32 f3AmpStatsProvDataTx	1.3.6.1.4.1.2544.1.12.24.2.1.1.1	Unsigned32	read-only	The number of Provisioning Data messages sent by AMP Server.
U32 f3AmpStatsProvDataRx	1.3.6.1.4.1.2544.1.12.24.2.1.1.2	Unsigned32	read-only	The number of Provisioning Data messages received by AMP Client.
U32 f3AmpStatsProvRequestTx	1.3.6.1.4.1.2544.1.12.24.2.1.1.3	Unsigned32	read-only	The number of Provisioning Request messages sent by AMP Client.
U32 f3AmpStatsProvRequestRx	1.3.6.1.4.1.2544.1.12.24.2.1.1.4	Unsigned32	read-only	The number of Provisioning Request received sent by AMP Server.
U32 f3AmpStatsConfigSuccessTx	1.3.6.1.4.1.2544.1.12.24.2.1.1.5	Unsigned32	read-only	The number of Configuration Success messages sent sent by AMP Client.
U32 f3AmpStatsConfigSuccessRx	1.3.6.1.4.1.2544.1.12.24.2.1.1.6	Unsigned32	read-only	The number of Configuration Success messages received by AMP Server.
U32 f3AmpStatsConfigFailTx	1.3.6.1.4.1.2544.1.12.24.2.1.1.7	Unsigned32	read-only	The number of Configuration Success messages received by AMP Client.
U32 f3AmpStatsConfigFailRx	1.3.6.1.4.1.2544.1.12.24.2.1.1.8	Unsigned32	read-only	The number of Configuration Success messages received by AMP Server.
U32 f3AmpStatsSpuriousMessageRx	1.3.6.1.4.1.2544.1.12.24.2.1.1.9	Unsigned32	read-only	The number of Spurious messages received by AMP Client or Server
U32 f3AmpStatsTimeoutRx	1.3.6.1.4.1.2544.1.12.24.2.1.1.10	Unsigned32	read-only	The number of messages which were not received within the time out value. AMP Client can time out while waiting for Prov Data message. AMP Server can time out while waiting for Config Fail or Config Success message.
AMP f3AmpStatsLastRxStatus	1.3.6.1.4.1.2544.1.12.24.2.1.1.11	AMPConfigStatus	read-only	Last received Configuration Status.
DAT f3AmpStatsRxTimeStamp	1.3.6.1.4.1.2544.1.12.24.2.1.1.12	DateAndTime	read-only	Time of last received Configuration Status.
AMP f3AmpStatsLastTxStatus	1.3.6.1.4.1.2544.1.12.24.2.1.1.13	AMPConfigStatus	read-only	Last sent Configuration Status.
DAT f3AmpStatsTxTimeStamp	1.3.6.1.4.1.2544.1.12.24.2.1.1.14	DateAndTime	read-only	Time of last sent Configuration Status.
f3AmpConformance	1.3.6.1.4.1.2544.1.12.24.3
f3AmpCompliances	1.3.6.1.4.1.2544.1.12.24.3.1
f3AmpCompliance	1.3.6.1.4.1.2544.1.12.24.3.1.1			Describes the requirements for conformance to the F3-AMP-MIB compilance.
f3AmpGroups	1.3.6.1.4.1.2544.1.12.24.3.2
f3AmpConfigGroup	1.3.6.1.4.1.2544.1.12.24.3.2.1			A collection of objects used to manage the AMP Configuration.
f3AmpStatsGroup	1.3.6.1.4.1.2544.1.12.24.3.2.2			A collection of objects used to manage the AMP Statistics.

RFC description

Automatic Management Provisioning MIB for ADVA Optical Networking F3 product lines (FSP150CM/CC), enabling client-server provisioning and configuration management.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Automatic Management Provisioning) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-AMP-MIB

What Is F3-AMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description