F10-OPENFLOW-MIB

All MIBs › F10-OPENFLOW-MIB

Organization: Dell Inc

Last Updated: 2012-03-27

Category: Protocol: OpenFlow, Technology: SDN/OpenFlow, Vendor: Dell/DNOS

Description: Dell Force10 MIB for OpenFlow SDN protocol management, enabling configuration and monitoring of OpenFlow on Force10 switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F10-OPENFLOW-MIB?

F10-OPENFLOW-MIB is a Dell Force10 (Dell Networking OS) MIB providing management objects for OpenFlow-enabled switches, exposing SDN controller and flow-table information from the switch's OpenFlow perspective. Per its module description, it covers configured OpenFlow instances, the controller(s) managing each instance, the ports assigned to an instance, VLANs participating in the instance, and the flows/flow-actions currently configured. Its monitoring relevance is software/configuration and operational-state oriented: an administrator can verify an OpenFlow instance is correctly associated with its controller, confirm expected ports/VLANs are bound to the instance, and inspect programmed flow entries to validate SDN forwarding behavior, an operational-status check for the SDN control plane rather than physical hardware sensors. It is explicitly built to represent the OpenFlow protocol model (as standardized by the Open Networking Foundation) on top of Dell's Force10 switch platform, making it dependent on OpenFlow protocol concepts for its object semantics. It is typically deployed in data-center or campus networks where Dell Force10 switches participate in an SDN fabric under centralized OpenFlow controller management, and administrators can download the F10-OPENFLOW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F10-OPENFLOW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Force10 (Dell Networking OS) Ethernet switch

Monitoring Examples

No specific object/table names were provided in the source extract beyond the module description, so specific tables cannot be cited without invention; based on that description, an administrator would poll an OpenFlow-instance table to see its associated controller, bound ports, and participating VLANs. They would also inspect flow and flow-action objects to confirm expected forwarding rules have been programmed by the controller. A missing or unexpected controller association, or an instance with no bound ports, would indicate an SDN configuration or connectivity problem.

What Can Be Monitored

OpenFlow instance configuration
controller association
bound ports per instance
VLAN membership per instance
programmed flows/flow-actions

Imported Objects

From FORCE10-SMI

f10Mgmt

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From Q-BRIDGE-MIB

VlanId

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
f10OpenFlow	1.3.6.1.4.1.6027.3.20			Dell Networking OS OpenFlow MIB provides information base of OpenFlow enabled Dell Networking OS Switch. This MIB exposes information about the Switch in OpenFlow perspective. Information of : 1) OpenFlow Instances configured, 2) Controller that configured it, 3) Ports that are configured under these instances, 4) VLANs that are part of these instances and 5) Flows & Flowactions configured are shared via this MIB.
ofSwitchObjects	1.3.6.1.4.1.6027.3.20.1
U32 ofSwitchId	1.3.6.1.4.1.6027.3.20.1.1	Unsigned32	read-only	Open Flow Switch Id: Identifier of this Switch
STR ofManufacturerDesc	1.3.6.1.4.1.6027.3.20.1.2	DisplayString	read-only	Open Flow Manufacturer Description: Provides info about the OF Switch manufacturer
STR ofHardwareDesc	1.3.6.1.4.1.6027.3.20.1.3	DisplayString	read-only	Open Flow Switch HardwareDescription
STR ofSoftwareDesc	1.3.6.1.4.1.6027.3.20.1.4	DisplayString	read-only	Open Flow Switch SoftwareDescription
OCT ofSwitchSerialNo	1.3.6.1.4.1.6027.3.20.1.5	OCTET STRING	read-only	Open Flow Switch Serial No: Provides the serial number of the switch
OCT ofSwitchVersion	1.3.6.1.4.1.6027.3.20.1.6	OCTET STRING	read-only	Open Flow Switch Version
ofInstTable	1.3.6.1.4.1.6027.3.20.1.7		not-accessible	Open Flow Instance Table
ofInstEntry	1.3.6.1.4.1.6027.3.20.1.7.1		not-accessible	Open Flow Instance Entry: This provides the sequence of objects that describes the properties of the Instance. ofInstId uniquely identifies the instance and hence it becomes an index
U32 ofInstId	1.3.6.1.4.1.6027.3.20.1.7.1.1	Unsigned32	not-accessible	Open Flow Instance Identifier
INT ofInstAdminState	1.3.6.1.4.1.6027.3.20.1.7.1.2	INTEGER	read-only	Open Flow Instance Admin State: tells whether this instance is enabled or not.
INT ofInstIntfType	1.3.6.1.4.1.6027.3.20.1.7.1.3	INTEGER	read-only	Open Flow Instance Interface Type: tells whether this instance is a Port or VLAN or ANY
OID ofInstDataPathId	1.3.6.1.4.1.6027.3.20.1.7.1.4	DataPathIdentifier	read-only	Open Flow Instance DataPath Identifier
U32 ofInstConnectTimeout	1.3.6.1.4.1.6027.3.20.1.7.1.5	Unsigned32	read-only	Open Flow Instance Connection Timeout: Tells the time after which the connection would be dropped
U32 ofInstEchoReplyTimeout	1.3.6.1.4.1.6027.3.20.1.7.1.6	Unsigned32	read-only	Open Flow Instance Echo Reply Timeout: Tells the max time for which the Echo message would wait for reply
U32 ofInstEchoReqInterval	1.3.6.1.4.1.6027.3.20.1.7.1.7	Unsigned32	read-only	Open Flow Instance Echo Request Interval: Tells how often the Echo message would be sent
U32 ofInstNumFlows	1.3.6.1.4.1.6027.3.20.1.7.1.8	Unsigned32	read-only	The current number of flows in this Instance
BIT ofInstSuppCapabilities	1.3.6.1.4.1.6027.3.20.1.7.1.9	Bits	read-only	Open Flow Instance Supported Capabilities: Gives the supported capabilities information by setting the appropriate BITS
BIT ofInstSuppActions	1.3.6.1.4.1.6027.3.20.1.7.1.10	Bits	read-only	Open Flow Instance Supported Actions: Gives the supported Action information by setting the appropriate BITS
ofCntlrTable	1.3.6.1.4.1.6027.3.20.1.8		not-accessible	Open Flow Controller Table: This table provides information about the Controller
ofCntlrEntry	1.3.6.1.4.1.6027.3.20.1.8.1		not-accessible	Open Flow Controller Entry
U32 ofCntlrId	1.3.6.1.4.1.6027.3.20.1.8.1.1	Unsigned32	not-accessible	Open Flow Controller Id: This provides Id of this controller
IPt ofCntlrAddrType	1.3.6.1.4.1.6027.3.20.1.8.1.2	InetAddressType	read-only	Open Flow Controller IP Address Type : The address type of the controller's IP address. If no controller is configured yet then this is set to unknown(0).
IP ofCntlrAddr	1.3.6.1.4.1.6027.3.20.1.8.1.3	InetAddress	read-only	Open Flow Controller IP Address: This gives the IP Address of the controller. The InetAddressType of this is given by the ofCntlrAddrType object.
INE ofCntlrPortNumber	1.3.6.1.4.1.6027.3.20.1.8.1.4	InetPortNumber	read-only	Open Flow Controller Port: This provides the port number to be used to communicate with the controller
INT ofCntlrProtocol	1.3.6.1.4.1.6027.3.20.1.8.1.5	INTEGER	read-only	Open Flow Controller Protocol: Tells which protocol is being used by this Controller for communication, either TLS or TCP
INT ofCntlrConState	1.3.6.1.4.1.6027.3.20.1.8.1.6	INTEGER	read-only	Open Flow Controller Connection State
ofPortTable	1.3.6.1.4.1.6027.3.20.1.9		not-accessible	Open Flow Port Table
ofPortEntry	1.3.6.1.4.1.6027.3.20.1.9.1		not-accessible	Open Flow Port Entry has ports assigned to the instance
NUM ofPortIfIndex	1.3.6.1.4.1.6027.3.20.1.9.1.1	InterfaceIndex	not-accessible	The ifIndex value corresponding to this port
INT ofPortAssociationType	1.3.6.1.4.1.6027.3.20.1.9.1.2	INTEGER	read-only	Open Flow Port Association Type: Tells whether this port is directly assigned to the instance or via VLAN.
ofVlanTable	1.3.6.1.4.1.6027.3.20.1.10		not-accessible	Open Flow VLAN Table containing port list information for each VLAN configured into the instance.
ofVlanEntry	1.3.6.1.4.1.6027.3.20.1.10.1		not-accessible	Open Flow VLAN Entry. Restricted to max 8 VLANs per instance.
NUM ofVlanIfIndex	1.3.6.1.4.1.6027.3.20.1.10.1.1	InterfaceIndex	not-accessible	The ifIndex value corresponding to this VLAN.
VLA ofVlanId	1.3.6.1.4.1.6027.3.20.1.10.1.2	VlanId	read-only	Open Flow Vlan Id: VALN-ID referring to this VLAN.
ofFlowTable	1.3.6.1.4.1.6027.3.20.1.11		not-accessible	Open Flow FlowTable
ofFlowEntry	1.3.6.1.4.1.6027.3.20.1.11.1		not-accessible	Open Flow Instance Flow Entry
U32 ofFlowId	1.3.6.1.4.1.6027.3.20.1.11.1.1	Unsigned32	not-accessible	OpenFlow Flow Id
U32 ofFlowTblId	1.3.6.1.4.1.6027.3.20.1.11.1.2	Unsigned32	not-accessible	OpenFlow Flow Table Id
U32 ofFlowPriority	1.3.6.1.4.1.6027.3.20.1.11.1.3	Unsigned32	read-only	OpenFlow Flow priority
U32 ofFlowIdleTime	1.3.6.1.4.1.6027.3.20.1.11.1.4	Unsigned32	read-only	OpenFlow Flow Idle Time
U32 ofFlowHardTime	1.3.6.1.4.1.6027.3.20.1.11.1.5	Unsigned32	read-only	OpenFlow Flow Hard Timeout
TIK ofFlowUpTime	1.3.6.1.4.1.6027.3.20.1.11.1.6	TimeTicks	read-only	The time since the OpenFlow flow was configured to be up.
OCT ofFlowCookie	1.3.6.1.4.1.6027.3.20.1.11.1.7	OCTET STRING	read-only	OpenFlow Flow Cookie String
C64 ofFlowPacketCount	1.3.6.1.4.1.6027.3.20.1.11.1.8	Counter64	read-only	OpenFlow Flow Packet Count
C64 ofFlowByteCount	1.3.6.1.4.1.6027.3.20.1.11.1.9	Counter64	read-only	OpenFlow Flow Byte Count
ofFlowMatchParamsTable	1.3.6.1.4.1.6027.3.20.1.12		not-accessible	Open Flow Match Parameter Table
ofFlowMatchParamsEntry	1.3.6.1.4.1.6027.3.20.1.12.1		not-accessible	A set of parameters to be mactheded on a particular openFlow Table.
OCT ofFlowMatchInPort	1.3.6.1.4.1.6027.3.20.1.12.1.1	OCTET STRING	read-only	OpenFlow Flow Match Ingress Ports; Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchEtherSrcAddr	1.3.6.1.4.1.6027.3.20.1.12.1.2	OCTET STRING	read-only	OpenFlow Flow Match Ethernet Source Address. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchEtherDstAddr	1.3.6.1.4.1.6027.3.20.1.12.1.3	OCTET STRING	read-only	OpenFlow Flow Match Ethernet Destination Address. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchVlanId	1.3.6.1.4.1.6027.3.20.1.12.1.4	OCTET STRING	read-only	OpenFlow Flow Match Vlan Id. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchEthType	1.3.6.1.4.1.6027.3.20.1.12.1.5	OCTET STRING	read-only	OpenFlow Flow Match Ethernet Type. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchVlanPri	1.3.6.1.4.1.6027.3.20.1.12.1.6	OCTET STRING	read-only	OpenFlow Flow Match VLAN Priority. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchIpTos	1.3.6.1.4.1.6027.3.20.1.12.1.7	OCTET STRING	read-only	OpenFlow Flow Match IP TOS
OCT ofFlowMatchIpProto	1.3.6.1.4.1.6027.3.20.1.12.1.8	OCTET STRING	read-only	OpenFlow Flow match IP Protocol
OCT ofFlowMatchIpSrcAddr	1.3.6.1.4.1.6027.3.20.1.12.1.9	OCTET STRING	read-only	OpenFlow Flow Match IP Source Address. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchIpDestAddr	1.3.6.1.4.1.6027.3.20.1.12.1.10	OCTET STRING	read-only	OpenFlow Flow Match IP Destination Adress. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchTpSrcPort	1.3.6.1.4.1.6027.3.20.1.12.1.11	OCTET STRING	read-only	OpenFlow Flow Match Transport Source Port. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
OCT ofFlowMatchTpDstPort	1.3.6.1.4.1.6027.3.20.1.12.1.12	OCTET STRING	read-only	OpenFlow Flow Match Transport Destination Port. Note that when the value of this object is the zero-length string, it indicates 'wild card'.
ofFlowActionTable	1.3.6.1.4.1.6027.3.20.1.13		not-accessible	OpenFlow Flow Action Table
ofFlowActionEntry	1.3.6.1.4.1.6027.3.20.1.13.1		not-accessible	OpenFlow Flow Action Entry
U32 ofFlowActionId	1.3.6.1.4.1.6027.3.20.1.13.1.1	Unsigned32	not-accessible	Open Flow Action Id
INT ofFlowActionType	1.3.6.1.4.1.6027.3.20.1.13.1.2	INTEGER	read-only	OpenFlow Flow Action Type - Following are the supported Actions outToSwitchPort -> Output to switch port. setVlanVid -> Set the 802.1q VLAN id. setVlanPcp -> Set the 802.1q priority. stripVlan -> Strip the 802.1q header. setDlSrc -> Ethernet source address. setDlDst -> Ethernet destination address. setNetworkSrc -> IP source address. setNetworkDst -> IP destination address. setNetworkTos -> IP ToS (DSCP field, 6 bits). setTpSrc -> TCP/UDP source port. setTpDest -> TCP/UDP destination port. outToQueue -> Output to queue. vendor -> Vendor specific action
MAC ofFlowActionSrcMac	1.3.6.1.4.1.6027.3.20.1.13.1.3	MacAddress	read-only	OpenFlow Flow Action Source Mac address
MAC ofFlowActionDstMac	1.3.6.1.4.1.6027.3.20.1.13.1.4	MacAddress	read-only	OpenFlow Flow Action Destination Mac
NUM ofFlowActionPortIndex	1.3.6.1.4.1.6027.3.20.1.13.1.5	InterfaceIndex	read-only	Ifindex value of OpenFlow Flow Action Port
VLA ofFlowActionVlanId	1.3.6.1.4.1.6027.3.20.1.13.1.6	VlanId	read-only	OpenFlow Flow Action VLAN ID
U32 ofFlowActionMaxLen	1.3.6.1.4.1.6027.3.20.1.13.1.7	Unsigned32	read-only	OpenFlow Flow Action Max Length
U32 ofFlowActionVlanPcp	1.3.6.1.4.1.6027.3.20.1.13.1.8	Unsigned32	read-only	OpenFlow Flow Action VLAN PCP
U32 ofFlowActionNWTos	1.3.6.1.4.1.6027.3.20.1.13.1.9	Unsigned32	read-only	OpenFlow Flow Action Network TOS
ofSwitchMibConformance	1.3.6.1.4.1.6027.3.20.1.14
ofSwitchMibCompliances	1.3.6.1.4.1.6027.3.20.1.14.1
ofSwitchMibCompliance	1.3.6.1.4.1.6027.3.20.1.14.1.1			The compliance statement for the Dell Networking OS OpenFlow MIB.
ofSwitchMibGroups	1.3.6.1.4.1.6027.3.20.1.14.2
ofSwitchScalarGroup	1.3.6.1.4.1.6027.3.20.1.14.2.1			This represents group of objects that provides OF Switch information.
ofInstanceGroup	1.3.6.1.4.1.6027.3.20.1.14.2.2			This represents group of objects that provides OF Instance information.
ofControllerGroup	1.3.6.1.4.1.6027.3.20.1.14.2.3			This represents group of objects that provides OF Controller information.
ofPortGroup	1.3.6.1.4.1.6027.3.20.1.14.2.4			This represents group of objects that provides information about OF Port that corresponds to OF Instance.
ofVlanGroup	1.3.6.1.4.1.6027.3.20.1.14.2.5			This represents group of objects that provides information about OF VLAN that corresponds to OF Instance.
ofFlowGroup	1.3.6.1.4.1.6027.3.20.1.14.2.6			This represents group of objects that provides OF Flow information.
ofFlowMatchParamsGroup	1.3.6.1.4.1.6027.3.20.1.14.2.7			This represents group of objects that provides OF Flow match information.
ofFlowActionGroup	1.3.6.1.4.1.6027.3.20.1.14.2.8			This represents group of objects that provides information about OF Flow Actions.
ofSwitchMibNotificationsGroup	1.3.6.1.4.1.6027.3.20.1.14.2.9			This represents Notification object of OF Switch.
ofSwitchNotification	1.3.6.1.4.1.6027.3.20.2
ofSwitchNotifications	1.3.6.1.4.1.6027.3.20.2.0
NTF ofSwitchCntlrSessionStatusChanged	1.3.6.1.4.1.6027.3.20.2.0.1			This notification is sent when ever Controller's Session Status has changed.
NTF ofSwitchFlowTableFull	1.3.6.1.4.1.6027.3.20.2.0.2			This notification is sent when ever Flow Table reached its maximum capacity. ofSwitchFlowTableSrc gives the id of the Flow Table that reached max flows
ofSwitchNotifyVariable	1.3.6.1.4.1.6027.3.20.2.1
INT ofSwitchFlowTableSrc	1.3.6.1.4.1.6027.3.20.2.1.1	INTEGER	accessible-for-notify	The unique ID of an OpenFlow Table. Used by ofSwitchFlowTableFull trap.

RFC description

Dell Force10 MIB for monitoring and managing OpenFlow protocol functionality on Dell networking switches, supporting Software Defined Networking (SDN) control plane separation.

Start monitoring Dell Force10 switch (OpenFlow SDN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F10-OPENFLOW-MIB

What Is F10-OPENFLOW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description