EMPIRE-CALPARA-MIB

All MIBs › EMPIRE-CALPARA-MIB

Organization: CA Technologies

Last Updated: 2010-09-14

Category: Domain: Server/Host Monitoring, Vendor: Empire/SystemEDGE

Description: Empire SystemEDGE CA LPara MIB providing logical partition monitoring objects for CA-managed server environments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EMPIRE-CALPARA-MIB?

EMPIRE-CALPARA-MIB is a vendor MIB from Empire Technologies' SystemEDGE agent, providing an Agent Instrumentation Module (AIM) called "calpara" for monitoring IBM Logical Partitions (LPARs) managed via CA products. It exposes an inventory table of LPAR instances, including instance name, system name, and the associated Hardware Management Console (HMC) name and credentials used to query LPAR data. It is used to monitor the software status of virtualized IBM Power server partitions, letting an admin check LPAR instance entries to confirm each partition is correctly configured and reachable via its associated HMC, effectively monitoring partition/software configuration status. It depends on the broader Empire SystemEDGE MIB tree, indicated by its empire, unix, and traps object groups, for base agent conventions and trap definitions. It is typically deployed on IBM Power Systems/AIX environments using SystemEDGE agents for centralized LPAR configuration monitoring in enterprise data centers. Engineers can download the EMPIRE-CALPARA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EMPIRE-CALPARA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IBM Power Systems servers running AIX with logical partitions (LPARs)
SystemEDGE agent hosts

Monitoring Examples

The lparAimInstanceTable/lparAimInstanceEntry rows, keyed by lparAimInstanceUID, expose lparAimInstanceName, lparAimInstanceSysName, and lparAimInstanceHMCName so an admin can verify each monitored LPAR is correctly associated with its managing HMC. Checking lparAimInstanceRowStatus and lparAimInstanceDataStatus reveals whether a given LPAR instance's monitoring configuration is active or has an error, such as a stale or invalid HMC credential. The lparAimInstanceCount object gives a quick total of configured LPAR instances, useful for confirming none have silently disappeared from the inventory after an HMC change.

What Can Be Monitored

LPAR instance inventory
LPAR-to-HMC association
LPAR monitoring configuration status
LPAR instance count

Imported Objects

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
RowStatus

How to Use in IPNetwork Monitor

Example using lparAimStatvDiskKBRead OID:

Select an IBM Power Systems/AIX host with LPAR (monitored via CA SystemEDGE agent) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type lparAimStatvDiskKBRead into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total number of KB read. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
empire	1.3.6.1.4.1.546
unix	1.3.6.1.4.1.546.1
sysmgmt	1.3.6.1.4.1.546.1.1
NTF lparAimSysDown	1.3.6.1.4.1.546.1.1.165315			The system down trap.
NTF lparAimSysDelete	1.3.6.1.4.1.546.1.1.165316			The system delete trap.
NTF lparAimSysAdd	1.3.6.1.4.1.546.1.1.165317			The system added trap.
NTF lparAimLPAdd	1.3.6.1.4.1.546.1.1.165321			The LP added trap.
NTF lparAimLPDelete	1.3.6.1.4.1.546.1.1.165322			The LP deleted Trap.
NTF lparAimSlotAdd	1.3.6.1.4.1.546.1.1.165340			The Slot added trap.
NTF lparAimSlotDelete	1.3.6.1.4.1.546.1.1.165341			The Slot deleted trap.
NTF lparAimSlotLPChange	1.3.6.1.4.1.546.1.1.165342			The Slot partition change trap.
NTF lparAimProfAdd	1.3.6.1.4.1.546.1.1.165350			The profile added trap.
NTF lparAimProfDelete	1.3.6.1.4.1.546.1.1.165351			The profile deleted trap.
NTF lparAimSysProfAdd	1.3.6.1.4.1.546.1.1.165360			The system profile added trap.
NTF lparAimSysProfDelete	1.3.6.1.4.1.546.1.1.165361			The system profile deleted trap.
NTF lparAimSysProfChange	1.3.6.1.4.1.546.1.1.165362			The system profile change trap.
NTF lparAimVIOvSCSIAdd	1.3.6.1.4.1.546.1.1.165370			The VIO Server SCSI added trap.
NTF lparAimVIOvSCSIDelete	1.3.6.1.4.1.546.1.1.165371			The VIO Server SCSI deleted trap.
NTF lparAimVIOvEthernetAdd	1.3.6.1.4.1.546.1.1.165373			The VIO Server Ethernet added trap.
NTF lparAimVIOvEthernetDelete	1.3.6.1.4.1.546.1.1.165374			The VIO Server Ethernet deleted trap.
NTF lparAimVIOvSerialAdd	1.3.6.1.4.1.546.1.1.165375			The VIO Server Serial added trap.
NTF lparAimVIOvSerialDelete	1.3.6.1.4.1.546.1.1.165376			The VIO Server Serial deleted trap.
NTF lparAimInstanceAddTrap	1.3.6.1.4.1.546.1.1.165380			LPAR Instance added trap. This trap will be sent when a new LPAR Instance is added, and data in Aim caches were updated according to that change.
NTF lparAimInstanceDeleteTrap	1.3.6.1.4.1.546.1.1.165381			LPAR Instance deleted trap. This trap will be sent when a LPAR Instance is deleted, and data in Aim caches were updated according to that change.
NTF lparAimInstanceDataStatusChangeTrap	1.3.6.1.4.1.546.1.1.165382			LPAR Instance data status change trap. This trap will be sent when data status of LPAR Instance is changed, and data in Aim caches were updated according to that change. The first DataStatus var is an old value, the second one holds a new value.
traps	1.3.6.1.4.1.546.9
lparAimSysDownEvent	1.3.6.1.4.1.546.9.165315
lparAimSysDeleteEvent	1.3.6.1.4.1.546.9.165316
lparAimSysAddEvent	1.3.6.1.4.1.546.9.165317
lparAimLPAddEvent	1.3.6.1.4.1.546.9.165321
lparAimLPDeleteEvent	1.3.6.1.4.1.546.9.165322
lparAimSlotAddEvent	1.3.6.1.4.1.546.9.165340
lparAimSlotDeleteEvent	1.3.6.1.4.1.546.9.165341
lparAimSlotLPChangeEvent	1.3.6.1.4.1.546.9.165342
lparAimProfAddEvent	1.3.6.1.4.1.546.9.165350
lparAimProfDeleteEvent	1.3.6.1.4.1.546.9.165351
lparAimSysProfAddEvent	1.3.6.1.4.1.546.9.165360
lparAimSysProfDeleteEvent	1.3.6.1.4.1.546.9.165361
lparAimSysProfChangeEvent	1.3.6.1.4.1.546.9.165362
lparAimVIOvSCSIAddEvent	1.3.6.1.4.1.546.9.165370
lparAimVIOvSCSIDeleteEvent	1.3.6.1.4.1.546.9.165371
lparAimVIOvEthernetAddEvent	1.3.6.1.4.1.546.9.165373
lparAimVIOvEthernetDeleteEvent	1.3.6.1.4.1.546.9.165374
lparAimVIOvSerialAddEvent	1.3.6.1.4.1.546.9.165375
lparAimVIOvSerialDeleteEvent	1.3.6.1.4.1.546.9.165376
lparAimInstanceAddEvent	1.3.6.1.4.1.546.9.165380
lparAimInstanceDeleteEvent	1.3.6.1.4.1.546.9.165381
lparAimInstanceDataStatusChangeEvent	1.3.6.1.4.1.546.9.165382
applications	1.3.6.1.4.1.546.16
calpara	1.3.6.1.4.1.546.16.53			This MIB is for IBM Logical Partition management. It is implemented by the SystemEDGE AIM for LPAR Monitoring (calpara).
lparAimGroup	1.3.6.1.4.1.546.16.53.1
I32 lparAimInstanceCount	1.3.6.1.4.1.546.16.53.1.1	Integer32	read-only	Number of LPAR Instances in lparAimInstanceTable.
lparAimInstanceTable	1.3.6.1.4.1.546.16.53.1.2		not-accessible	A table containing the LPAR Instances.
lparAimInstanceEntry	1.3.6.1.4.1.546.16.53.1.2.1		not-accessible	The LPAR Instances Table entry.
I32 lparAimInstanceUID	1.3.6.1.4.1.546.16.53.1.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimInstanceName	1.3.6.1.4.1.546.16.53.1.2.1.2	DisplayString	read-create	Name of the LPAR Instance.
STR lparAimInstanceSysName	1.3.6.1.4.1.546.16.53.1.2.1.3	DisplayString	read-only	The name of the System.
STR lparAimInstanceHMCName	1.3.6.1.4.1.546.16.53.1.2.1.4	DisplayString	read-create	Host name of HMC console.
STR lparAimInstanceUserName	1.3.6.1.4.1.546.16.53.1.2.1.5	SnmpAdminString	read-create	User name for connecting to the HMC console.
STR lparAimInstancePassword	1.3.6.1.4.1.546.16.53.1.2.1.6	SnmpAdminString	read-create	Password for connecting to the HMC console.
ROW lparAimInstanceRowStatus	1.3.6.1.4.1.546.16.53.1.2.1.7	RowStatus	read-create	The row status according to the Textual Conventions for SMIv2 (see RFC 2579). active(1) - the row is available for usage notInService(2) - setting to this value disables usage of the row notReady(3) - an error occured during usage of the row createAndGo(4) - setting to this value creates the row with row status set to active(1) createAndWait(5) - setting to this value creates the row with row status set to notInService(2) destroy(6) - setting to this value deletes the row
INT lparAimInstanceDataStatus	1.3.6.1.4.1.546.16.53.1.2.1.8	INTEGER	read-only	The status of data of the LPAR Instance (Server), i.e. status of Aim caches for the instance. ready(1) - data are ready in Aim cache, caches were populated notReady(2) - data are Not ready, caches were not populated yet hostUnreachable(3) - HMC host unreachable, data are kept in Aim caches authenticationFailed(4) - authentication failed for HMC host, data are kept in Aim caches unknownError(5) - unknow error, data are kept in Aim caches
lparAimCfgGenGroup	1.3.6.1.4.1.546.16.53.2
STR lparAimCfgGenPluginName	1.3.6.1.4.1.546.16.53.2.1	DisplayString	read-only	The plugin name.
STR lparAimCfgGenPluginVer	1.3.6.1.4.1.546.16.53.2.2	DisplayString	read-only	The currently installed version of the plugin.
I32 lparAimCfgGenPollInterval	1.3.6.1.4.1.546.16.53.2.3	Integer32	read-write	The time (in seconds) between the polling by the Agent. Valid values are greater than or equal to 300 seconds.
STR lparAimCfgGenPluginHostName	1.3.6.1.4.1.546.16.53.2.4	DisplayString	read-only	The host name on which this LPAR plugin is running.
lparAimStatGroup	1.3.6.1.4.1.546.16.53.3
lparAimStatSysGroup	1.3.6.1.4.1.546.16.53.3.2
lparAimStatSysTable	1.3.6.1.4.1.546.16.53.3.2.1		not-accessible	A table containing the servers the LPAR Plugin monitors.
lparAimStatSysEntry	1.3.6.1.4.1.546.16.53.3.2.1.1		not-accessible	The table entry of servers the LPAR Plugin monitors.
I32 lparAimStatSysInstanceUID	1.3.6.1.4.1.546.16.53.3.2.1.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatSysInstanceName	1.3.6.1.4.1.546.16.53.3.2.1.1.2	DisplayString	read-only	The LPAR Plugin instance name.
STR lparAimStatSysName	1.3.6.1.4.1.546.16.53.3.2.1.1.3	DisplayString	read-only	The name of the System.
STR lparAimStatSysType	1.3.6.1.4.1.546.16.53.3.2.1.1.4	DisplayString	read-only	The Type of the System. P4/P5/P6.
INT lparAimStatSysStatus	1.3.6.1.4.1.546.16.53.3.2.1.1.5	INTEGER	read-only	The Status of the System.
STR lparAimStatSysSrNum	1.3.6.1.4.1.546.16.53.3.2.1.1.6	DisplayString	read-only	The Serial Number of the System.
STR lparAimStatSysModelType	1.3.6.1.4.1.546.16.53.3.2.1.1.7	DisplayString	read-only	The Model type of the System.
STR lparAimStatSysProdLine	1.3.6.1.4.1.546.16.53.3.2.1.1.8	DisplayString	read-only	The Product line of the System.
STR lparAimStatSysSPVer	1.3.6.1.4.1.546.16.53.3.2.1.1.9	DisplayString	read-only	The Service Processor Version running on the System.
I32 lparAimStatSysMaxPartition	1.3.6.1.4.1.546.16.53.3.2.1.1.10	Integer32	read-only	The Maximum number of logical partitions possible on the System.
I32 lparAimStatSysProcInstalled	1.3.6.1.4.1.546.16.53.3.2.1.1.11	Integer32	read-only	The number of processors installed on the System.
I32 lparAimStatSysMemInstalled	1.3.6.1.4.1.546.16.53.3.2.1.1.12	Integer32	read-only	The memory (MB) installed on the System.
I32 lparAimStatSysFreeMem	1.3.6.1.4.1.546.16.53.3.2.1.1.13	Integer32	read-only	The free memory ( MB ) available on the System.
INT lparAimStatSysCpuCODCapable	1.3.6.1.4.1.546.16.53.3.2.1.1.14	INTEGER	read-only	Indicates whether system is CPU Capacity On Demand capable.
INT lparAimStatSysMemCODCapable	1.3.6.1.4.1.546.16.53.3.2.1.1.15	INTEGER	read-only	Indicates whether system is Memory Capacity On Demand capable.
INT lparAimStatSysOS400Capable	1.3.6.1.4.1.546.16.53.3.2.1.1.16	INTEGER	read-only	Indicates whether system is OS400 capable.
INT lparAimStatSysMicroLPCapable	1.3.6.1.4.1.546.16.53.3.2.1.1.17	INTEGER	read-only	Indicates whether system is Micro LPAR capable.
INT lparAimStatSysVirtualIOCapable	1.3.6.1.4.1.546.16.53.3.2.1.1.18	INTEGER	read-only	Indicates whether system is Virtual IO capable.
I32 lparAimStatSysLMBSize	1.3.6.1.4.1.546.16.53.3.2.1.1.19	Integer32	read-only	The size of one logical memory block (LMB), in megabytes.
I32 lparAimStatSysLoad	1.3.6.1.4.1.546.16.53.3.2.1.1.20	Integer32	read-only	The Managed System Partitions Average Load (Run queue size). Value is Average Load multiplied by 100
I32 lparAimStatSysFiveLoad	1.3.6.1.4.1.546.16.53.3.2.1.1.21	Integer32	read-only	The Managed System Partitions 5 minute Average Load (Run queue size). Value is Actual FiveLoad multiplied by 100
I32 lparAimStatSysFifteenLoad	1.3.6.1.4.1.546.16.53.3.2.1.1.22	Integer32	read-only	The Managed System Partitions 15 minute Average Load (Run queue size). Value is Actual FifteenLoad multiplied by 100
I32 lparAimStatSysPhyProcConsumed	1.3.6.1.4.1.546.16.53.3.2.1.1.23	Integer32	read-only	The amount Physical Processor Consumed for whole system(not average).
I32 lparAimStatSysCPU	1.3.6.1.4.1.546.16.53.3.2.1.1.24	Integer32	read-only	The Managed System Partitions Overall CPU.
I32 lparAimStatSysCPUAverage	1.3.6.1.4.1.546.16.53.3.2.1.1.25	Integer32	read-only	The Managed System Partitions Average CPU.
I32 lparAimStatSysMem	1.3.6.1.4.1.546.16.53.3.2.1.1.26	Integer32	read-only	The Managed System Partitions Memory Usage.
I32 lparAimStatSysMemAverage	1.3.6.1.4.1.546.16.53.3.2.1.1.27	Integer32	read-only	The Managed System Partitions Average Memory Usage.
I32 lparAimStatSysUnavailable	1.3.6.1.4.1.546.16.53.3.2.1.1.32	Integer32	read-only	The Managed System Unavailable.
STR lparAimStatSysEntC	1.3.6.1.4.1.546.16.53.3.2.1.1.36	DisplayString	read-only	Average Entitlement Capacity for the running Partitions on this Managed System
STR lparAimStatHMCName	1.3.6.1.4.1.546.16.53.3.2.1.1.37	DisplayString	read-only	HMC name
STR lparAimStatSysCpuUtilization	1.3.6.1.4.1.546.16.53.3.2.1.1.38	DisplayString	read-only	Managed System CPU Utilization in Percent
STR lparAimStatSysIP	1.3.6.1.4.1.546.16.53.3.2.1.1.40	DisplayString	read-only	The IP Address of the system.
I32 lparAimStatSysAllocMem	1.3.6.1.4.1.546.16.53.3.2.1.1.41	Integer32	read-only	The allocted memory ( MB ) on the System.
I32 lparAimStatSysLparMem	1.3.6.1.4.1.546.16.53.3.2.1.1.42	Integer32	read-only	Memory available for partition creation (total installed - firmware used).
I32 lparAimStatSysAvailCPU	1.3.6.1.4.1.546.16.53.3.2.1.1.43	Integer32	read-only	Available processor units
STR lparAimStatSysOpPanel	1.3.6.1.4.1.546.16.53.3.2.1.1.44	DisplayString	read-only	The operations panel on the actual hardware unit.
lparAimStatLPGroup	1.3.6.1.4.1.546.16.53.3.3
I32 lparAimStatLPCount	1.3.6.1.4.1.546.16.53.3.3.1	Integer32	read-only	The number of currently monitored logical partitions.
lparAimStatLPTable	1.3.6.1.4.1.546.16.53.3.3.2		not-accessible	A table containing the partitions which are being monitored.
lparAimStatLPEntry	1.3.6.1.4.1.546.16.53.3.3.2.1		not-accessible	The table entry.
I32 lparAimStatLPInstanceUID	1.3.6.1.4.1.546.16.53.3.3.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatLPInstanceName	1.3.6.1.4.1.546.16.53.3.3.2.1.2	DisplayString	read-only	The LPAR Plugin instance name.
I32 lparAimStatLPUID	1.3.6.1.4.1.546.16.53.3.3.2.1.3	Integer32	read-only	The unique identifier for the logical partition.
I32 lparAimStatLPId	1.3.6.1.4.1.546.16.53.3.3.2.1.4	Integer32	read-only	The identifier for the logical partition.
STR lparAimStatLPName	1.3.6.1.4.1.546.16.53.3.3.2.1.5	SnmpAdminString	read-only	The name of the logical partition.
STR lparAimStatLPDesc	1.3.6.1.4.1.546.16.53.3.3.2.1.6	SnmpAdminString	read-only	The description for this watcher.
STR lparAimStatLPProfile	1.3.6.1.4.1.546.16.53.3.3.2.1.7	SnmpAdminString	read-only	The profile associated with the logical partition.
INT lparAimStatLPStatus	1.3.6.1.4.1.546.16.53.3.3.2.1.8	INTEGER	read-only	The status of logical partition.
INT lparAimStatLPCapable	1.3.6.1.4.1.546.16.53.3.3.2.1.9	INTEGER	read-only	The flag indicating if the logical Partition is DLPAR capable.
I32 lparAimStatLPProcMin	1.3.6.1.4.1.546.16.53.3.3.2.1.10	Integer32	read-only	The minimum number of processing units that needs to be allocated to the logical partition.
I32 lparAimStatLPProcMax	1.3.6.1.4.1.546.16.53.3.3.2.1.11	Integer32	read-only	The maximum number of processing units that can be allocated to the logical partition.
I32 lparAimStatLPProcCur	1.3.6.1.4.1.546.16.53.3.3.2.1.12	Integer32	read-only	The current number of processing units that is allocated to the logical partition.
I32 lparAimStatLPMemMin	1.3.6.1.4.1.546.16.53.3.3.2.1.13	Integer32	read-only	The minimum amount of memory in MB that needs to be allocated to the logical partition.
I32 lparAimStatLPMemMax	1.3.6.1.4.1.546.16.53.3.3.2.1.14	Integer32	read-only	The maximum amount of memory in MB that can be allocated to the logical partition.
I32 lparAimStatLPMemCur	1.3.6.1.4.1.546.16.53.3.3.2.1.15	Integer32	read-only	The current amount of memory in MB that is allocated to the logical partition.
I32 lparAimStatLPLoad	1.3.6.1.4.1.546.16.53.3.3.2.1.16	Integer32	read-only	The Load Average of the logical partition. Value is Actual Load multiplied by 100
I32 lparAimStatLPFiveLoad	1.3.6.1.4.1.546.16.53.3.3.2.1.17	Integer32	read-only	The 5-minute Load Average of the logical partition. Value is Actual FiveLoad multiplied by 100
I32 lparAimStatLPFifteenLoad	1.3.6.1.4.1.546.16.53.3.3.2.1.18	Integer32	read-only	The 15-minute Load Average of the logical partition. Value is Actual FifteenLoad multiplied by 100
STR lparAimStatLPSharedProcPoolId	1.3.6.1.4.1.546.16.53.3.3.2.1.19	DisplayString	read-only	The shared processor pool id number of the logical partition.
STR lparAimStatLPProcMode	1.3.6.1.4.1.546.16.53.3.3.2.1.20	DisplayString	read-only	Processor mode of the logical partition.
STR lparAimStatLPSharingMode	1.3.6.1.4.1.546.16.53.3.3.2.1.21	DisplayString	read-only	Sharing Mode of the logical partition.
STR lparAimStatLPIP	1.3.6.1.4.1.546.16.53.3.3.2.1.22	DisplayString	read-only	The IP Address of the logical partition.
I32 lparAimStatLPNumCPUs	1.3.6.1.4.1.546.16.53.3.3.2.1.23	Integer32	read-only	The processing units of the logical partition. Value displayed multiplied by 100.
I32 lparAimStatLPPhyProcConsumed	1.3.6.1.4.1.546.16.53.3.3.2.1.24	Integer32	read-only	The physical processor consumed by the logical partition (summation not average).
I32 lparAimStatLPCPUPhyBusy	1.3.6.1.4.1.546.16.53.3.3.2.1.25	Integer32	read-only	The percentage of time (over the sample period) the logical partition CPU was busy.
I32 lparAimStatLPCPUIdle	1.3.6.1.4.1.546.16.53.3.3.2.1.26	Integer32	read-only	The percentage of time (over the sample period) the CPU of the logical partition was idle. This value is only available for Virtual I/O server.
I32 lparAimStatLPCPUSysTime	1.3.6.1.4.1.546.16.53.3.3.2.1.27	Integer32	read-only	The percentage of time (over the sample period) the CPU of logical partition was executing kernel or operating system. This value is only available for Virtual I/O server.
I32 lparAimStatLPCPUUserTime	1.3.6.1.4.1.546.16.53.3.3.2.1.28	Integer32	read-only	The percentage of time (over the sample period) the CPU of logical partition was executing in user mode. This value is only available for Virtual I/O server.
I32 lparAimStatLPCPUIOWait	1.3.6.1.4.1.546.16.53.3.3.2.1.29	Integer32	read-only	The percentage of time (over the sample period) the CPU of logical partition was waiting for I/O. This value is only available for Virtual I/O server.
I32 lparAimStatLPNumLogicalCPU	1.3.6.1.4.1.546.16.53.3.3.2.1.30	Integer32	read-only	The number of allocated logical CPU to the logical partition. This value is only available forVirtual I/O server.
G32 lparAimStatLPCPUUsage	1.3.6.1.4.1.546.16.53.3.3.2.1.31	Gauge32	read-only	The CPU usage of the LPAR.
I32 lparAimStatLPLMB	1.3.6.1.4.1.546.16.53.3.3.2.1.34	Integer32	read-only	The Number of Logical Memory Blocks allocated to the logical partition.
G32 lparAimStatLPMemoryUsage	1.3.6.1.4.1.546.16.53.3.3.2.1.35	Gauge32	read-only	The memory usage of the logical partition.
I32 lparAimStatLPUnavailable	1.3.6.1.4.1.546.16.53.3.3.2.1.48	Integer32	read-only	The Partition Unavailable.
STR lparAimStatLPEntC	1.3.6.1.4.1.546.16.53.3.3.2.1.50	DisplayString	read-only	The percentage of entitle capacity consumed by the partition. This value is available if the partition is running with shared processor. Since the time base over which this data is computed vary, this value can sometimes exceed 100%. This excess is noticed only for small sampling period.
I32 lparAimStatLPNumDiskDrives	1.3.6.1.4.1.546.16.53.3.3.2.1.52	Integer32	read-only	The Number of Disk Drives in the partition. This value is only available for Virtual I/O server.
I32 lparAimStatLPNumDrivePaths	1.3.6.1.4.1.546.16.53.3.3.2.1.53	Integer32	read-only	The Number of Drive Paths in the partition. This value is only available for Virtual I/O server.
I32 lparAimStatLPNumVDisks	1.3.6.1.4.1.546.16.53.3.3.2.1.54	Integer32	read-only	The Number of Virtual Disks in the partition. This value is only available for Virtual I/O server.
STR lparAimStatLPHostname	1.3.6.1.4.1.546.16.53.3.3.2.1.58	DisplayString	read-only	The host name of the OS running on the system.
STR lparAimStatLPOs	1.3.6.1.4.1.546.16.53.3.3.2.1.59	DisplayString	read-only	Installed OS version UNIX(aix/linux) / VIO Server.
STR lparAimStatLPMAC	1.3.6.1.4.1.546.16.53.3.3.2.1.60	DisplayString	read-only	The partition's MAC address.
I32 lparAimStatLPCurVProc	1.3.6.1.4.1.546.16.53.3.3.2.1.61	Integer32	read-only	The desired number of virtual processors allocated to the shared mode partition.
I32 lparAimStatLPMaxVProc	1.3.6.1.4.1.546.16.53.3.3.2.1.62	Integer32	read-only	The max number of virtual processors allocated to the shared mode partition.
I32 lparAimStatLPMinVProc	1.3.6.1.4.1.546.16.53.3.3.2.1.63	Integer32	read-only	The minimum number of virtual processors allocated to the shared mode partition.
STR lparAimStatLPOpPanel	1.3.6.1.4.1.546.16.53.3.3.2.1.64	DisplayString	read-only	The operations panel of the partition.
lparAimStatSlotGroup	1.3.6.1.4.1.546.16.53.3.4
I32 lparAimStatSlotCount	1.3.6.1.4.1.546.16.53.3.4.1	Integer32	read-only	The number of currently monitored Slots.
lparAimStatSlotTable	1.3.6.1.4.1.546.16.53.3.4.2		not-accessible	A table containing the Slots which are being monitored.
lparAimStatSlotEntry	1.3.6.1.4.1.546.16.53.3.4.2.1		not-accessible	The table entry.
I32 lparAimStatSlotInstanceUID	1.3.6.1.4.1.546.16.53.3.4.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatSlotInstanceName	1.3.6.1.4.1.546.16.53.3.4.2.1.2	DisplayString	read-only	The LPAR plugin instance name.
I32 lparAimStatSlotUID	1.3.6.1.4.1.546.16.53.3.4.2.1.3	Integer32	read-only	The Slot unique identifier.
STR lparAimStatSlotDRCName	1.3.6.1.4.1.546.16.53.3.4.2.1.4	DisplayString	read-only	The DRC name of the slot.
I32 lparAimStatSlotDRCIndex	1.3.6.1.4.1.546.16.53.3.4.2.1.5	Integer32	read-only	The DRC Index the slot.
STR lparAimStatSlotName	1.3.6.1.4.1.546.16.53.3.4.2.1.6	DisplayString	read-only	The name of the Slot.
STR lparAimStatSlotDrawer	1.3.6.1.4.1.546.16.53.3.4.2.1.7	DisplayString	read-only	The drawer the slot belongs to.
STR lparAimStatSlotPartition	1.3.6.1.4.1.546.16.53.3.4.2.1.8	SnmpAdminString	read-only	The partition the slot is assigned.
STR lparAimStatSlotType	1.3.6.1.4.1.546.16.53.3.4.2.1.9	SnmpAdminString	read-only	The type of the slot.
STR lparAimStatSlotId	1.3.6.1.4.1.546.16.53.3.4.2.1.10	DisplayString	read-only	The ID of the slot.
STR lparAimStatSlotVendor	1.3.6.1.4.1.546.16.53.3.4.2.1.11	SnmpAdminString	read-only	The Vendor of the slot.
STR lparAimStatSlotParentDRCIndex	1.3.6.1.4.1.546.16.53.3.4.2.1.12	DisplayString	read-only	The parent DRC Index the slot.
lparAimStatProfGroup	1.3.6.1.4.1.546.16.53.3.5
I32 lparAimStatProfCount	1.3.6.1.4.1.546.16.53.3.5.1	Integer32	read-only	The number of profiles on the System.
lparAimStatProfTable	1.3.6.1.4.1.546.16.53.3.5.2		not-accessible	A table containing the Profiles which are being monitored.
lparAimStatProfEntry	1.3.6.1.4.1.546.16.53.3.5.2.1		not-accessible	The table entry.
I32 lparAimStatProfInstanceUID	1.3.6.1.4.1.546.16.53.3.5.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatProfInstanceName	1.3.6.1.4.1.546.16.53.3.5.2.1.2	DisplayString	read-only	The LPAR plugin instance name.
I32 lparAimStatProfUID	1.3.6.1.4.1.546.16.53.3.5.2.1.3	Integer32	read-only	The unique identifier of the profile.
STR lparAimStatProfName	1.3.6.1.4.1.546.16.53.3.5.2.1.4	SnmpAdminString	read-only	The name of the Profile.
STR lparAimStatProfSlot	1.3.6.1.4.1.546.16.53.3.5.2.1.5	DisplayString	read-only	The slot for the Profile.
STR lparAimStatProfLP	1.3.6.1.4.1.546.16.53.3.5.2.1.6	SnmpAdminString	read-only	The partition to which the profile is associated with.
STR lparAimStatProfDeflt	1.3.6.1.4.1.546.16.53.3.5.2.1.7	DisplayString	read-only	Is the profile a default profile for the partition.
I32 lparAimStatProfMaxCPU	1.3.6.1.4.1.546.16.53.3.5.2.1.8	Integer32	read-only	The Maximum number of processors that partition can have.
I32 lparAimStatProfMinCPU	1.3.6.1.4.1.546.16.53.3.5.2.1.9	Integer32	read-only	The Minimum number of processors that partition should have.
I32 lparAimStatProfDesCPU	1.3.6.1.4.1.546.16.53.3.5.2.1.10	Integer32	read-only	The Desired number of processors that partition should have.
I32 lparAimStatProfMaxMem	1.3.6.1.4.1.546.16.53.3.5.2.1.11	Integer32	read-only	The Maximum memory ( MB ) that partition can have.
I32 lparAimStatProfMinMem	1.3.6.1.4.1.546.16.53.3.5.2.1.12	Integer32	read-only	The Minimum memory (MB) that partition should have.
I32 lparAimStatProfDesMem	1.3.6.1.4.1.546.16.53.3.5.2.1.13	Integer32	read-only	The Desired memory ( MB ) that partition should have.
STR lparAimStatProfBootMod	1.3.6.1.4.1.546.16.53.3.5.2.1.14	DisplayString	read-only	The Boot mode of the partition.
STR lparAimStatProfProcMode	1.3.6.1.4.1.546.16.53.3.5.2.1.15	DisplayString	read-only	The processor mode.
STR lparAimStatProfSharingMode	1.3.6.1.4.1.546.16.53.3.5.2.1.16	DisplayString	read-only	The sharing mode.
lparAimStatSysProfGroup	1.3.6.1.4.1.546.16.53.3.6
I32 lparAimStatSysProfCount	1.3.6.1.4.1.546.16.53.3.6.1	Integer32	read-only	The number of system profiles on the System.
lparAimStatSysProfTable	1.3.6.1.4.1.546.16.53.3.6.2		not-accessible	A table containing the system profiles.
lparAimStatSysProfEntry	1.3.6.1.4.1.546.16.53.3.6.2.1		not-accessible	The table entry.
I32 lparAimStatSysProfInstanceUID	1.3.6.1.4.1.546.16.53.3.6.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatSysProfInstanceName	1.3.6.1.4.1.546.16.53.3.6.2.1.2	DisplayString	read-only	The LPAR Plugin instance.
I32 lparAimStatSysProfUID	1.3.6.1.4.1.546.16.53.3.6.2.1.3	Integer32	read-only	The System Profile's unique identifier.
STR lparAimStatSysProfName	1.3.6.1.4.1.546.16.53.3.6.2.1.4	SnmpAdminString	read-only	The name of the System Profile.
STR lparAimStatSysProfProfiles	1.3.6.1.4.1.546.16.53.3.6.2.1.5	SnmpAdminString	read-only	The profiles that belong to the System Profile.
STR lparAimStatSysProfPartitions	1.3.6.1.4.1.546.16.53.3.6.2.1.6	SnmpAdminString	read-only	The partitions the system profile is associated with.
lparAimStatvSCSIGroup	1.3.6.1.4.1.546.16.53.3.7
I32 lparAimStatvSCSICount	1.3.6.1.4.1.546.16.53.3.7.1	Integer32	read-only	The number of virtual SCSI devices hosted in the system.
lparAimStatvSCSITable	1.3.6.1.4.1.546.16.53.3.7.2		not-accessible	A table containing the virtual SCSI devices.
lparAimStatvSCSIEntry	1.3.6.1.4.1.546.16.53.3.7.2.1		not-accessible	The table entry.
I32 lparAimStatvSCSIInstanceUID	1.3.6.1.4.1.546.16.53.3.7.2.1.1	Integer32	read-only	The LPAR Plugin instance name.
STR lparAimStatvSCSIInstanceName	1.3.6.1.4.1.546.16.53.3.7.2.1.2	DisplayString	read-only	The LPAR Plugin instance name.
I32 lparAimStatvSCSIUID	1.3.6.1.4.1.546.16.53.3.7.2.1.3	Integer32	read-only	The VSCSI's unique identifier.
STR lparAimStatvSCSILPAR	1.3.6.1.4.1.546.16.53.3.7.2.1.4	SnmpAdminString	read-only	The name of the LPAR the virtual SCSI device is being hosted on.
STR lparAimStatvSCSILPARID	1.3.6.1.4.1.546.16.53.3.7.2.1.5	DisplayString	read-only	The ID of the LPAR the virtual SCSI device is being hosted on.
STR lparAimStatvSCSISlotNum	1.3.6.1.4.1.546.16.53.3.7.2.1.6	DisplayString	read-only	The virtual SCSI device's slot number
STR lparAimStatvSCSIAdapterType	1.3.6.1.4.1.546.16.53.3.7.2.1.7	SnmpAdminString	read-only	The type of virtual SCSI adapter
STR lparAimStatvSCSIRemoteLPARID	1.3.6.1.4.1.546.16.53.3.7.2.1.8	DisplayString	read-only	The remote LPAR ID that is allowed to connect to this virtual SCSI device
STR lparAimStatvSCSIRemoteLPAR	1.3.6.1.4.1.546.16.53.3.7.2.1.9	SnmpAdminString	read-only	The name of the remote LPAR that is allowed to connect to this virtual SCSI device
STR lparAimStatvSCSIRemoteLPARSlotNum	1.3.6.1.4.1.546.16.53.3.7.2.1.10	DisplayString	read-only	The slot number of the remote LPAR that is allowed to connect to this virtual SCSI device
STR lparAimStatvSCSIIsRequired	1.3.6.1.4.1.546.16.53.3.7.2.1.11	DisplayString	read-only	Indicates if the virtual SCSI device is required for the logical partition. Valid values are yes and no.
STR lparAimStatvSCSIBackingDevice	1.3.6.1.4.1.546.16.53.3.7.2.1.12	DisplayString	read-only	The backing physical device for this virtual SCSI device
lparAimStatvEthernetGroup	1.3.6.1.4.1.546.16.53.3.8
I32 lparAimStatvEthernetCount	1.3.6.1.4.1.546.16.53.3.8.1	Integer32	read-only	The number of virtual Ethernet devices hosted in the system.
lparAimStatvEthernetTable	1.3.6.1.4.1.546.16.53.3.8.2		not-accessible	A table containing the virtual Ethernet devices.
lparAimStatvEthernetEntry	1.3.6.1.4.1.546.16.53.3.8.2.1		not-accessible	The table entry.
I32 lparAimStatvEthernetInstanceUID	1.3.6.1.4.1.546.16.53.3.8.2.1.1	Integer32	read-only	The virtual Ethernet's unique identifier.
STR lparAimStatvEthernetInstanceName	1.3.6.1.4.1.546.16.53.3.8.2.1.2	DisplayString	read-only	The LPAR Plugin instance name.
I32 lparAimStatvEthernetUID	1.3.6.1.4.1.546.16.53.3.8.2.1.3	Integer32	read-only	The VEthernet's unique identifier.
STR lparAimStatvEthernetLPAR	1.3.6.1.4.1.546.16.53.3.8.2.1.4	SnmpAdminString	read-only	The name of the LPAR the virtual Ethernet device is being hosted on.
STR lparAimStatvEthernetLPARID	1.3.6.1.4.1.546.16.53.3.8.2.1.5	DisplayString	read-only	The ID of the LPAR the virtual Ethernet device is being hosted on.
STR lparAimStatvEthernetSlotNum	1.3.6.1.4.1.546.16.53.3.8.2.1.6	DisplayString	read-only	The virtual Ethernet device's slot number
STR lparAimStatvEthernetIEEE	1.3.6.1.4.1.546.16.53.3.8.2.1.7	DisplayString	read-only	Indicates if the adapter is an IEEE 802.1Q compatible adapter
STR lparAimStatvEthernetPortVLAN	1.3.6.1.4.1.546.16.53.3.8.2.1.8	DisplayString	read-only	The virtual LAN the virtual Ethernet is connected to
STR lparAimStatvEthernetAdditionalVLAN	1.3.6.1.4.1.546.16.53.3.8.2.1.9	DisplayString	read-only	Additional virtual LANs the virtual Ethernet is connected to
STR lparAimStatvEthernetIsTrunk	1.3.6.1.4.1.546.16.53.3.8.2.1.10	DisplayString	read-only	Indicates if the virtual Ethernet adapter is the trunk or uplink adapter for the virtual LAN. Valid values are yes and no.
STR lparAimStatvEthernetIsRequired	1.3.6.1.4.1.546.16.53.3.8.2.1.11	DisplayString	read-only	Indicates if the virtual Ethernet device is required for the logical partition. Valid values are yes and no.
STR lparAimStatvEthernetMACAddress	1.3.6.1.4.1.546.16.53.3.8.2.1.12	DisplayString	read-only	The MAC address of the virtual Ethernet device
lparAimStatvSerialGroup	1.3.6.1.4.1.546.16.53.3.9
I32 lparAimStatvSerialCount	1.3.6.1.4.1.546.16.53.3.9.1	Integer32	read-only	The number of virtual serial devices hosted in the system.
lparAimStatvSerialTable	1.3.6.1.4.1.546.16.53.3.9.2		not-accessible	A table containing the virtual serial devices.
lparAimStatvSerialEntry	1.3.6.1.4.1.546.16.53.3.9.2.1		not-accessible	The table entry.
I32 lparAimStatvSerialInstanceUID	1.3.6.1.4.1.546.16.53.3.9.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatvSerialInstanceName	1.3.6.1.4.1.546.16.53.3.9.2.1.2	DisplayString	read-only	The LPAR plugin instance name.
I32 lparAimStatvSerialUID	1.3.6.1.4.1.546.16.53.3.9.2.1.3	Integer32	read-only	The virtual SCSI's unique identifier.
STR lparAimStatvSerialLPAR	1.3.6.1.4.1.546.16.53.3.9.2.1.4	SnmpAdminString	read-only	The name of the LPAR the virtual serial device is being hosted on.
STR lparAimStatvSerialLPARID	1.3.6.1.4.1.546.16.53.3.9.2.1.5	DisplayString	read-only	The ID of the LPAR the virtual serial device is being hosted on.
STR lparAimStatvSerialSlotNum	1.3.6.1.4.1.546.16.53.3.9.2.1.6	DisplayString	read-only	The virtual serial device's slot number
STR lparAimStatvSerialAdapterType	1.3.6.1.4.1.546.16.53.3.9.2.1.7	SnmpAdminString	read-only	The type of virtual serial device
STR lparAimStatvSerialSupportsHMC	1.3.6.1.4.1.546.16.53.3.9.2.1.8	DisplayString	read-only	Indicates if the serial device can be used by an HMC
STR lparAimStatvSerialRemoteLPARID	1.3.6.1.4.1.546.16.53.3.9.2.1.9	DisplayString	read-only	The identifier of the remote partition the virtual serial device is associated with.
STR lparAimStatvSerialRemoteLPAR	1.3.6.1.4.1.546.16.53.3.9.2.1.10	SnmpAdminString	read-only	The remote LPAR that is allowed to connect to this virtual serial device
STR lparAimStatvSerialRemoteSlotNum	1.3.6.1.4.1.546.16.53.3.9.2.1.11	DisplayString	read-only	The remote LPAR's slot number that is allowed to connect to this virtual serial device
STR lparAimStatvSerialIsRequired	1.3.6.1.4.1.546.16.53.3.9.2.1.12	DisplayString	read-only	Indicates if the virtual Serial device is required for the logical partition. Valid values are yes and no.
lparAimStatvDiskGroup	1.3.6.1.4.1.546.16.53.3.10
I32 lparAimStatvDiskCount	1.3.6.1.4.1.546.16.53.3.10.1	Integer32	read-only	The number of physical disk on Virtual I/O Server. Only those disks are displayed, which has PhysicalVolume parameter specified.
lparAimStatvDiskTable	1.3.6.1.4.1.546.16.53.3.10.2		not-accessible	A table containing the physical disks.
lparAimStatvDiskEntry	1.3.6.1.4.1.546.16.53.3.10.2.1		not-accessible	The table entry.
I32 lparAimStatvDiskInstanceUID	1.3.6.1.4.1.546.16.53.3.10.2.1.1	Integer32	read-only	LPAR Instance unique identifier.
STR lparAimStatvDiskInstanceName	1.3.6.1.4.1.546.16.53.3.10.2.1.2	DisplayString	read-only	Name of LPAR Instance.
I32 lparAimStatvDiskUID	1.3.6.1.4.1.546.16.53.3.10.2.1.3	Integer32	read-only	The unique identifier of physical disk.
STR lparAimStatvDiskLPARID	1.3.6.1.4.1.546.16.53.3.10.2.1.4	DisplayString	read-only	LPAR identification number to which this disk belongs to.
STR lparAimStatvDiskLPAR	1.3.6.1.4.1.546.16.53.3.10.2.1.5	SnmpAdminString	read-only	LPAR name to which this disk belongs to.
STR lparAimStatvDiskName	1.3.6.1.4.1.546.16.53.3.10.2.1.6	DisplayString	read-only	The name of physical disk.
I32 lparAimStatvDiskActivePercent	1.3.6.1.4.1.546.16.53.3.10.2.1.7	Integer32	read-only	The percentage of time the physical disk was active(bandwidth utilization for the drive).
I32 lparAimStatvDiskKBPS	1.3.6.1.4.1.546.16.53.3.10.2.1.8	Integer32	read-only	The amount of data transferred (read or written) to the drive in KB per second.
I32 lparAimStatvDiskTPS	1.3.6.1.4.1.546.16.53.3.10.2.1.9	Integer32	read-only	The number of transfers per second that were issued to the physical disk. A transfer is an I/O request to the physical disk. Multiple logical requests can be combined into a single I/O request to the disk. A transfer is of indeterminate size.
C64 lparAimStatvDiskKBReadEx	1.3.6.1.4.1.546.16.53.3.10.2.1.10	Counter64	read-only	Total number of KB read.
C64 lparAimStatvDiskKBWritten	1.3.6.1.4.1.546.16.53.3.10.2.1.11	Counter64	read-only	Total number of KB written.

RFC description

Monitors IBM Logical Partition (LPAR) system and resource utilization on SystemEDGE LPAR monitoring platforms.

Start monitoring IBM Power Systems/AIX host with LPARs (monitored via CA SystemEDGE agent) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EMPIRE-CALPARA-MIB