-- COPYRIGHT 2010 CA, Inc. ALL RIGHTS RESERVED. -- THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF -- THE CA, Inc. COPYRIGHT NOTICE IS PRECAUTIONARY -- ONLY AND DOES NOT IMPLY PUBLICATION. -- No part of this document may be reproduced, transmitted, transcribed, -- stored in a retrieval system, or translated into any language or -- computer language, in any form or by any means, without -- prior written consent of CA, Inc. EMPIRE-CALPARA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Gauge32, Counter64, enterprises FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB; ------------------------------------------------------------ -- LPAR MIB root OID is: 1.3.6.1.4.1.546.16.53 ------------------------------------------------------------ calpara MODULE-IDENTITY LAST-UPDATED "201009140000Z" ORGANIZATION "CA Technologies" CONTACT-INFO "One CA Plaza, Islandia, NY 11749, USA, www.ca.com/support" DESCRIPTION "This MIB is for IBM Logical Partition management. It is implemented by the SystemEDGE AIM for LPAR Monitoring (calpara)." REVISION "201009140000Z" DESCRIPTION "Deprecated status monitoring related attributes and trap definitions (see below) Changed MIB to conform to the SMIv2 Changed lparAimLPAdd trap varbind (lparAimStatLPStatus instead lparAimStatLPState) Added new attribute lparAimStatSysCpuUtilization Using Counter64 for lparAimStatvDiskKBRead and lparAimStatvDiskKBWritten Using SnmpAdminString for several attributes (I18N support)" REVISION "201002240000Z" DESCRIPTION "Initial version of this MIB module (based on 11.7)." ::= { applications 53 } empire OBJECT IDENTIFIER ::= { enterprises 546 } unix OBJECT IDENTIFIER ::= { empire 1 } traps OBJECT IDENTIFIER ::= { empire 9 } applications OBJECT IDENTIFIER ::= { empire 16 } sysmgmt OBJECT IDENTIFIER ::= { unix 1 } ------------------------------------------------------------ -- LPAR Top Level Groups ------------------------------------------------------------ lparAimGroup OBJECT IDENTIFIER ::= { calpara 1 } lparAimCfgGenGroup OBJECT IDENTIFIER ::= { calpara 2 } lparAimStatGroup OBJECT IDENTIFIER ::= { calpara 3 } lparAimStatSysGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 2 } lparAimStatLPGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 3 } lparAimStatSlotGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 4 } lparAimStatProfGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 5 } lparAimStatSysProfGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 6 } lparAimStatvSCSIGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 7 } lparAimStatvEthernetGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 8 } lparAimStatvSerialGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 9 } lparAimStatvDiskGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 10 } ------------------------------------------------------------ -- LPAR Trap Definitions ------------------------------------------------------------ lparAimSysDownEvent OBJECT IDENTIFIER ::= { traps 165315 } lparAimSysDeleteEvent OBJECT IDENTIFIER ::= { traps 165316 } lparAimSysAddEvent OBJECT IDENTIFIER ::= { traps 165317 } lparAimLPAddEvent OBJECT IDENTIFIER ::= { traps 165321 } lparAimLPDeleteEvent OBJECT IDENTIFIER ::= { traps 165322 } lparAimSlotAddEvent OBJECT IDENTIFIER ::= { traps 165340 } lparAimSlotDeleteEvent OBJECT IDENTIFIER ::= { traps 165341 } lparAimSlotLPChangeEvent OBJECT IDENTIFIER ::= { traps 165342 } lparAimProfAddEvent OBJECT IDENTIFIER ::= { traps 165350 } lparAimProfDeleteEvent OBJECT IDENTIFIER ::= { traps 165351 } lparAimSysProfAddEvent OBJECT IDENTIFIER ::= { traps 165360 } lparAimSysProfDeleteEvent OBJECT IDENTIFIER ::= { traps 165361 } lparAimSysProfChangeEvent OBJECT IDENTIFIER ::= { traps 165362 } lparAimVIOvSCSIAddEvent OBJECT IDENTIFIER ::= { traps 165370 } lparAimVIOvSCSIDeleteEvent OBJECT IDENTIFIER ::= { traps 165371 } lparAimVIOvEthernetAddEvent OBJECT IDENTIFIER ::= { traps 165373 } lparAimVIOvEthernetDeleteEvent OBJECT IDENTIFIER ::= { traps 165374 } lparAimVIOvSerialAddEvent OBJECT IDENTIFIER ::= { traps 165375 } lparAimVIOvSerialDeleteEvent OBJECT IDENTIFIER ::= { traps 165376 } lparAimInstanceAddEvent OBJECT IDENTIFIER ::= { traps 165380 } lparAimInstanceDeleteEvent OBJECT IDENTIFIER ::= { traps 165381 } lparAimInstanceDataStatusChangeEvent OBJECT IDENTIFIER ::= { traps 165382 } ------------------------------------------------------------ -- LPAR Deprecated Object Identifiers ------------------------------------------------------------ -- The following Top Level OIDs, attributes and traps are deprecated. -- These OIDs resp. OIDs within these groups should no more be used. -- lparAimEventGroup OBJECT IDENTIFIER ::= { calpara 4 } -- lparAimStatGenGroup OBJECT IDENTIFIER ::= { lparAimStatGroup 1 } -- lparAimCfgGenLogLevel OBJECT-TYPE ::= { lparAimCfgGenGroup 5 } -- lparAimConfigGeneralTable OBJECT-TYPE ::= { lparAimCfgGenGroup 6 } -- lparAimCfgGenVsysNameCIM OBJECT-TYPE ::= { lparAimCfgGenGroup 7 } -- lparAimStatSysWarningCPUThreshold OBJECT-TYPE ::= { lparAimStatSysEntry 28 } -- lparAimStatSysCriticalCPUThreshold OBJECT-TYPE ::= { lparAimStatSysEntry 29 } -- lparAimStatSysWarningMemThreshold OBJECT-TYPE ::= { lparAimStatSysEntry 30 } -- lparAimStatSysCriticalMemThreshold OBJECT-TYPE ::= { lparAimStatSysEntry 31 } -- lparAimStatSysMonitor OBJECT-TYPE ::= { lparAimStatSysEntry 33 } -- lparAimStatSysAlertState OBJECT-TYPE ::= { lparAimStatSysEntry 34 } -- lparAimStatSysState OBJECT-TYPE ::= { lparAimStatSysEntry 35 } -- lparAimStatSysCpuState OBJECT-TYPE ::= { lparAimStatSysEntry 39 } -- lparAimStatLPCPUUsageWarningThresh OBJECT-TYPE ::= { lparAimStatLPEntry 32 } -- lparAimStatLPCPUUsageCritThresh OBJECT-TYPE ::= { lparAimStatLPEntry 33 } -- lparAimStatLPMemoryUsageWarningThresh OBJECT-TYPE ::= { lparAimStatLPEntry 36 } -- lparAimStatLPMemoryUsageCritThresh OBJECT-TYPE ::= { lparAimStatLPEntry 37 } -- lparAimStatLPCPUState OBJECT-TYPE ::= { lparAimStatLPEntry 38 } -- lparAimStatLPMemoryState OBJECT-TYPE ::= { lparAimStatLPEntry 39 } -- lparAimStatLPCPUAlert OBJECT-TYPE ::= { lparAimStatLPEntry 40 } -- lparAimStatLPMemoryAlert OBJECT-TYPE ::= { lparAimStatLPEntry 41 } -- lparAimStatLPMonitor OBJECT-TYPE ::= { lparAimStatLPEntry 42 } -- lparAimStatLPAlertState OBJECT-TYPE ::= { lparAimStatLPEntry 43 } -- lparAimStatLPCPUMonitor OBJECT-TYPE ::= { lparAimStatLPEntry 44 } -- lparAimStatLPMemoryMonitor OBJECT-TYPE ::= { lparAimStatLPEntry 45 } -- lparAimStatLPCPULagSetting OBJECT-TYPE ::= { lparAimStatLPEntry 46 } -- lparAimStatLPCPULagValue OBJECT-TYPE ::= { lparAimStatLPEntry 47 } -- lparAimStatLPCPUAggregateStatus OBJECT-TYPE ::= { lparAimStatLPEntry 49 } -- lparAimStatLPState OBJECT-TYPE ::= { lparAimStatLPEntry 51 } -- lparAimStatLPMonitorBkp OBJECT-TYPE ::= { lparAimStatLPEntry 55 } -- lparAimStatLPCPUMonitorBkp OBJECT-TYPE ::= { lparAimStatLPEntry 56 } -- lparAimStatLPMemoryMonitorBkp OBJECT-TYPE ::= { lparAimStatLPEntry 57 } -- lparAimStatSlotMonitor OBJECT-TYPE ::= { lparAimStatSlotEntry 13 } -- lparAimStatSlotMonitorBkp OBJECT-TYPE ::= { lparAimStatSlotEntry 14 } -- lparAimSysStateChangeEvent OBJECT IDENTIFIER ::= { traps 165310 } -- lparAimSysCfgMonitorChangeEvent OBJECT IDENTIFIER ::= { traps 165311 } -- lparAimSysCfgAlertChangeEvent OBJECT IDENTIFIER ::= { traps 165312 } -- lparAimSysCPUThresholdChangeEvent OBJECT IDENTIFIER ::= { traps 165313 } -- lparAimSysMEMThresholdChangeEvent OBJECT IDENTIFIER ::= { traps 165314 } -- lparAimSysCpuStateChangeEvent OBJECT IDENTIFIER ::= { traps 165318 } -- lparAimLPStateChangeEvent OBJECT IDENTIFIER ::= { traps 165320 } -- lparAimLPMonitorEvent OBJECT IDENTIFIER ::= { traps 165323 } -- lparAimLPAlertEvent OBJECT IDENTIFIER ::= { traps 165324 } -- lparAimLPCPUMonitorEvent OBJECT IDENTIFIER ::= { traps 165325 } -- lparAimLPMemoryMonitorEvent OBJECT IDENTIFIER ::= { traps 165326 } -- lparAimLPCPULagSettingEvent OBJECT IDENTIFIER ::= { traps 165327 } -- lparAimLPCPUWarnThresholdEvent OBJECT IDENTIFIER ::= { traps 165328 } -- lparAimLPCPUCritThresholdEvent OBJECT IDENTIFIER ::= { traps 165329 } -- lparAimLPMemoryWarnThresholdEvent OBJECT IDENTIFIER ::= { traps 165330 } -- lparAimLPMemoryCritThresholdEvent OBJECT IDENTIFIER ::= { traps 165331 } -- lparAimLPMemoryStateEven OBJECT IDENTIFIER ::= { traps 165332 } -- lparAimLPCPUStateEvent OBJECT IDENTIFIER ::= { traps 165333 } -- lparAimSlotMonitorChangeEvent OBJECT IDENTIFIER ::= { traps 165343 } ------------------------------------------------------------ -- The LPAR System Instance Table ------------------------------------------------------------ lparAimInstanceCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LPAR Instances in lparAimInstanceTable." ::= {lparAimGroup 1} lparAimInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimInstanceRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the LPAR Instances." ::= { lparAimGroup 2 } lparAimInstanceEntry OBJECT-TYPE SYNTAX LparAimInstanceRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LPAR Instances Table entry." INDEX { lparAimInstanceUID } ::= { lparAimInstanceTable 1 } LparAimInstanceRow ::= SEQUENCE { lparAimInstanceUID Integer32, lparAimInstanceName DisplayString, lparAimInstanceSysName DisplayString, lparAimInstanceHMCName DisplayString, lparAimInstanceUserName SnmpAdminString, lparAimInstancePassword SnmpAdminString, lparAimInstanceRowStatus Integer32, lparAimInstanceDataStatus Integer32 } lparAimInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimInstanceEntry 1} lparAimInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the LPAR Instance." ::= { lparAimInstanceEntry 2} lparAimInstanceSysName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the System." ::= { lparAimInstanceEntry 3} lparAimInstanceHMCName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Host name of HMC console." ::= { lparAimInstanceEntry 4} lparAimInstanceUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "User name for connecting to the HMC console." ::= { lparAimInstanceEntry 5} lparAimInstancePassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "Password for connecting to the HMC console." ::= { lparAimInstanceEntry 6} lparAimInstanceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status according to the Textual Conventions for SMIv2 (see RFC 2579). active(1) - the row is available for usage notInService(2) - setting to this value disables usage of the row notReady(3) - an error occured during usage of the row createAndGo(4) - setting to this value creates the row with row status set to active(1) createAndWait(5) - setting to this value creates the row with row status set to notInService(2) destroy(6) - setting to this value deletes the row" DEFVAL { 5 } ::= { lparAimInstanceEntry 7 } lparAimInstanceDataStatus OBJECT-TYPE SYNTAX INTEGER { ready(1), notReady(2), hostUnreachable(3), authenticationFailed(4), unknownError(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of data of the LPAR Instance (Server), i.e. status of Aim caches for the instance. ready(1) - data are ready in Aim cache, caches were populated notReady(2) - data are Not ready, caches were not populated yet hostUnreachable(3) - HMC host unreachable, data are kept in Aim caches authenticationFailed(4) - authentication failed for HMC host, data are kept in Aim caches unknownError(5) - unknow error, data are kept in Aim caches" ::= { lparAimInstanceEntry 8 } ------------------------------------------------------------ -- The LPAR Config General Group ------------------------------------------------------------ lparAimCfgGenPluginName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The plugin name." ::= { lparAimCfgGenGroup 1 } lparAimCfgGenPluginVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The currently installed version of the plugin." ::= { lparAimCfgGenGroup 2 } lparAimCfgGenPollInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time (in seconds) between the polling by the Agent. Valid values are greater than or equal to 300 seconds." DEFVAL { 300 } ::= { lparAimCfgGenGroup 3 } lparAimCfgGenPluginHostName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The host name on which this LPAR plugin is running." ::= { lparAimCfgGenGroup 4 } ------------------------------------------------------------ -- The LPAR Statistic System Table ------------------------------------------------------------ lparAimStatSysTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatSysRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the servers the LPAR Plugin monitors." ::= { lparAimStatSysGroup 1 } lparAimStatSysEntry OBJECT-TYPE SYNTAX LparAimStatSysRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry of servers the LPAR Plugin monitors." INDEX { lparAimStatSysInstanceUID } ::= { lparAimStatSysTable 1 } LparAimStatSysRow ::= SEQUENCE { lparAimStatSysInstanceUID Integer32, lparAimStatSysInstanceName DisplayString, lparAimStatSysName DisplayString, lparAimStatSysType DisplayString, lparAimStatSysStatus Integer32, lparAimStatSysSrNum DisplayString, lparAimStatSysModelType DisplayString, lparAimStatSysProdLine DisplayString, lparAimStatSysSPVer DisplayString, lparAimStatSysMaxPartition Integer32, lparAimStatSysProcInstalled Integer32, lparAimStatSysMemInstalled Integer32, lparAimStatSysFreeMem Integer32, lparAimStatSysCpuCODCapable Integer32, lparAimStatSysMemCODCapable Integer32, lparAimStatSysOS400Capable Integer32, lparAimStatSysMicroLPCapable Integer32, lparAimStatSysVirtualIOCapable Integer32, lparAimStatSysLMBSize Integer32, lparAimStatSysLoad Integer32, lparAimStatSysFiveLoad Integer32, lparAimStatSysFifteenLoad Integer32, lparAimStatSysPhyProcConsumed Integer32, lparAimStatSysCPU Integer32, lparAimStatSysCPUAverage Integer32, lparAimStatSysMem Integer32, lparAimStatSysMemAverage Integer32, lparAimStatSysUnavailable Integer32, lparAimStatSysEntC DisplayString, lparAimStatHMCName DisplayString, lparAimStatSysCpuUtilization DisplayString, lparAimStatSysIP DisplayString, lparAimStatSysAllocMem Integer32, lparAimStatSysLparMem Integer32, lparAimStatSysAvailCPU Integer32, lparAimStatSysOpPanel DisplayString } lparAimStatSysInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatSysEntry 1 } lparAimStatSysInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR Plugin instance name." ::= { lparAimStatSysEntry 2 } lparAimStatSysName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the System." ::= { lparAimStatSysEntry 3 } lparAimStatSysType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of the System. P4/P5/P6." ::= { lparAimStatSysEntry 4 } lparAimStatSysStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), initializing(2), ready(3), no-power(4), error(5), incomplete(6), no-connection(7), recovery(8), version-mismatch(9), cuod-cta(10), operating(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Status of the System." ::= { lparAimStatSysEntry 5 } lparAimStatSysSrNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Serial Number of the System." ::= { lparAimStatSysEntry 6 } lparAimStatSysModelType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Model type of the System." ::= { lparAimStatSysEntry 7 } lparAimStatSysProdLine OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Product line of the System." ::= { lparAimStatSysEntry 8 } lparAimStatSysSPVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Service Processor Version running on the System." ::= { lparAimStatSysEntry 9 } lparAimStatSysMaxPartition OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Maximum number of logical partitions possible on the System." ::= { lparAimStatSysEntry 10 } lparAimStatSysProcInstalled OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of processors installed on the System." ::= { lparAimStatSysEntry 11 } lparAimStatSysMemInstalled OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The memory (MB) installed on the System." ::= { lparAimStatSysEntry 12 } lparAimStatSysFreeMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The free memory ( MB ) available on the System." ::= { lparAimStatSysEntry 13 } lparAimStatSysCpuCODCapable OBJECT-TYPE SYNTAX INTEGER { unknown(1), yes(2), no(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether system is CPU Capacity On Demand capable." ::= { lparAimStatSysEntry 14 } lparAimStatSysMemCODCapable OBJECT-TYPE SYNTAX INTEGER { unknown(1), yes(2), no(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether system is Memory Capacity On Demand capable." ::= { lparAimStatSysEntry 15 } lparAimStatSysOS400Capable OBJECT-TYPE SYNTAX INTEGER { unknown(1), yes(2), no(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether system is OS400 capable." ::= { lparAimStatSysEntry 16 } lparAimStatSysMicroLPCapable OBJECT-TYPE SYNTAX INTEGER { unknown(1), yes(2), no(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether system is Micro LPAR capable." ::= { lparAimStatSysEntry 17 } lparAimStatSysVirtualIOCapable OBJECT-TYPE SYNTAX INTEGER { unknown(1), yes(2), no(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether system is Virtual IO capable." ::= { lparAimStatSysEntry 18 } lparAimStatSysLMBSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of one logical memory block (LMB), in megabytes." ::= { lparAimStatSysEntry 19 } lparAimStatSysLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions Average Load (Run queue size). Value is Average Load multiplied by 100" ::= { lparAimStatSysEntry 20 } lparAimStatSysFiveLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions 5 minute Average Load (Run queue size). Value is Actual FiveLoad multiplied by 100" ::= { lparAimStatSysEntry 21 } lparAimStatSysFifteenLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions 15 minute Average Load (Run queue size). Value is Actual FifteenLoad multiplied by 100" ::= { lparAimStatSysEntry 22 } lparAimStatSysPhyProcConsumed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount Physical Processor Consumed for whole system(not average)." ::= { lparAimStatSysEntry 23 } lparAimStatSysCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions Overall CPU." ::= { lparAimStatSysEntry 24 } lparAimStatSysCPUAverage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions Average CPU." ::= { lparAimStatSysEntry 25 } lparAimStatSysMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions Memory Usage." ::= { lparAimStatSysEntry 26 } lparAimStatSysMemAverage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Partitions Average Memory Usage." ::= { lparAimStatSysEntry 27 } lparAimStatSysUnavailable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Managed System Unavailable." ::= { lparAimStatSysEntry 32 } lparAimStatSysEntC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Average Entitlement Capacity for the running Partitions on this Managed System" ::= { lparAimStatSysEntry 36 } lparAimStatHMCName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HMC name" ::= { lparAimStatSysEntry 37 } lparAimStatSysCpuUtilization OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Managed System CPU Utilization in Percent" ::= { lparAimStatSysEntry 38 } lparAimStatSysIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the system." ::= { lparAimStatSysEntry 40 } lparAimStatSysAllocMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The allocted memory ( MB ) on the System." ::= { lparAimStatSysEntry 41 } lparAimStatSysLparMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Memory available for partition creation (total installed - firmware used)." ::= { lparAimStatSysEntry 42 } lparAimStatSysAvailCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available processor units" ::= { lparAimStatSysEntry 43 } lparAimStatSysOpPanel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The operations panel on the actual hardware unit." ::= { lparAimStatSysEntry 44 } ------------------------------------------------------------ -- The LPAR Statistic Logical Partition Table ------------------------------------------------------------ lparAimStatLPCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently monitored logical partitions." ::= { lparAimStatLPGroup 1 } lparAimStatLPTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatLPRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the partitions which are being monitored." ::= { lparAimStatLPGroup 2 } lparAimStatLPEntry OBJECT-TYPE SYNTAX LparAimStatLPRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatLPInstanceUID, lparAimStatLPUID } ::= { lparAimStatLPTable 1 } LparAimStatLPRow ::= SEQUENCE { lparAimStatLPInstanceUID Integer32, lparAimStatLPInstanceName DisplayString, lparAimStatLPUID Integer32, lparAimStatLPId Integer32, lparAimStatLPName SnmpAdminString, lparAimStatLPDesc SnmpAdminString, lparAimStatLPProfile SnmpAdminString, lparAimStatLPStatus Integer32, lparAimStatLPCapable Integer32, lparAimStatLPProcMin Integer32, lparAimStatLPProcMax Integer32, lparAimStatLPProcCur Integer32, lparAimStatLPMemMin Integer32, lparAimStatLPMemMax Integer32, lparAimStatLPMemCur Integer32, lparAimStatLPLoad Integer32, lparAimStatLPFiveLoad Integer32, lparAimStatLPFifteenLoad Integer32, lparAimStatLPSharedProcPoolId DisplayString, lparAimStatLPProcMode DisplayString, lparAimStatLPSharingMode DisplayString, lparAimStatLPIP DisplayString, lparAimStatLPNumCPUs Integer32, lparAimStatLPPhyProcConsumed Integer32, lparAimStatLPCPUPhyBusy Integer32, lparAimStatLPCPUIdle Integer32, lparAimStatLPCPUSysTime Integer32, lparAimStatLPCPUUserTime Integer32, lparAimStatLPCPUIOWait Integer32, lparAimStatLPNumLogicalCPU Integer32, lparAimStatLPCPUUsage Gauge32, lparAimStatLPLMB Integer32, lparAimStatLPMemoryUsage Gauge32, lparAimStatLPUnavailable Integer32, lparAimStatLPEntC DisplayString, lparAimStatLPNumDiskDrives Integer32, lparAimStatLPNumDrivePaths Integer32, lparAimStatLPNumVDisks Integer32, lparAimStatLPHostname DisplayString, lparAimStatLPOs DisplayString, lparAimStatLPMAC DisplayString, lparAimStatLPCurVProc Integer32, lparAimStatLPMaxVProc Integer32, lparAimStatLPMinVProc Integer32, lparAimStatLPOpPanel DisplayString } lparAimStatLPInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatLPEntry 1 } lparAimStatLPInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR Plugin instance name." ::= { lparAimStatLPEntry 2 } lparAimStatLPUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique identifier for the logical partition." ::= { lparAimStatLPEntry 3 } lparAimStatLPId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier for the logical partition." ::= { lparAimStatLPEntry 4 } lparAimStatLPName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the logical partition." ::= { lparAimStatLPEntry 5 } lparAimStatLPDesc OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The description for this watcher." ::= { lparAimStatLPEntry 6 } lparAimStatLPProfile OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The profile associated with the logical partition." ::= { lparAimStatLPEntry 7 } lparAimStatLPStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), ready(2), starting(3), running(4), error(5), not-activated(6), open-firmware(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of logical partition." ::= { lparAimStatLPEntry 8} lparAimStatLPCapable OBJECT-TYPE SYNTAX INTEGER { unknown(1), yes(2), no(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The flag indicating if the logical Partition is DLPAR capable." ::= { lparAimStatLPEntry 9 } lparAimStatLPProcMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of processing units that needs to be allocated to the logical partition." ::= { lparAimStatLPEntry 10 } lparAimStatLPProcMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of processing units that can be allocated to the logical partition." ::= { lparAimStatLPEntry 11 } lparAimStatLPProcCur OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of processing units that is allocated to the logical partition." ::= { lparAimStatLPEntry 12 } lparAimStatLPMemMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of memory in MB that needs to be allocated to the logical partition." ::= { lparAimStatLPEntry 13 } lparAimStatLPMemMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum amount of memory in MB that can be allocated to the logical partition." ::= { lparAimStatLPEntry 14 } lparAimStatLPMemCur OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current amount of memory in MB that is allocated to the logical partition." ::= { lparAimStatLPEntry 15 } lparAimStatLPLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Load Average of the logical partition. Value is Actual Load multiplied by 100" ::= { lparAimStatLPEntry 16 } lparAimStatLPFiveLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The 5-minute Load Average of the logical partition. Value is Actual FiveLoad multiplied by 100" ::= { lparAimStatLPEntry 17 } lparAimStatLPFifteenLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The 15-minute Load Average of the logical partition. Value is Actual FifteenLoad multiplied by 100" ::= { lparAimStatLPEntry 18 } lparAimStatLPSharedProcPoolId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The shared processor pool id number of the logical partition." ::= { lparAimStatLPEntry 19 } lparAimStatLPProcMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Processor mode of the logical partition." ::= { lparAimStatLPEntry 20 } lparAimStatLPSharingMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Sharing Mode of the logical partition." ::= { lparAimStatLPEntry 21 } lparAimStatLPIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the logical partition." ::= { lparAimStatLPEntry 22 } lparAimStatLPNumCPUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The processing units of the logical partition. Value displayed multiplied by 100." ::= { lparAimStatLPEntry 23 } lparAimStatLPPhyProcConsumed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The physical processor consumed by the logical partition (summation not average)." ::= { lparAimStatLPEntry 24 } lparAimStatLPCPUPhyBusy OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time (over the sample period) the logical partition CPU was busy." ::= { lparAimStatLPEntry 25 } lparAimStatLPCPUIdle OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time (over the sample period) the CPU of the logical partition was idle. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 26 } lparAimStatLPCPUSysTime OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time (over the sample period) the CPU of logical partition was executing kernel or operating system. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 27 } lparAimStatLPCPUUserTime OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time (over the sample period) the CPU of logical partition was executing in user mode. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 28 } lparAimStatLPCPUIOWait OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time (over the sample period) the CPU of logical partition was waiting for I/O. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 29 } lparAimStatLPNumLogicalCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of allocated logical CPU to the logical partition. This value is only available forVirtual I/O server." ::= { lparAimStatLPEntry 30 } lparAimStatLPCPUUsage OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU usage of the LPAR." ::= { lparAimStatLPEntry 31 } lparAimStatLPLMB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Logical Memory Blocks allocated to the logical partition." ::= { lparAimStatLPEntry 34 } lparAimStatLPMemoryUsage OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The memory usage of the logical partition." ::= { lparAimStatLPEntry 35 } lparAimStatLPUnavailable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Partition Unavailable." ::= { lparAimStatLPEntry 48 } lparAimStatLPEntC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of entitle capacity consumed by the partition. This value is available if the partition is running with shared processor. Since the time base over which this data is computed vary, this value can sometimes exceed 100%. This excess is noticed only for small sampling period." ::= { lparAimStatLPEntry 50 } lparAimStatLPNumDiskDrives OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Disk Drives in the partition. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 52 } lparAimStatLPNumDrivePaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Drive Paths in the partition. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 53 } lparAimStatLPNumVDisks OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of Virtual Disks in the partition. This value is only available for Virtual I/O server." ::= { lparAimStatLPEntry 54 } lparAimStatLPHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The host name of the OS running on the system." ::= { lparAimStatLPEntry 58 } lparAimStatLPOs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Installed OS version UNIX(aix/linux) / VIO Server." ::= { lparAimStatLPEntry 59 } lparAimStatLPMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The partition's MAC address." ::= { lparAimStatLPEntry 60 } lparAimStatLPCurVProc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The desired number of virtual processors allocated to the shared mode partition." ::= { lparAimStatLPEntry 61 } lparAimStatLPMaxVProc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max number of virtual processors allocated to the shared mode partition." ::= { lparAimStatLPEntry 62 } lparAimStatLPMinVProc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of virtual processors allocated to the shared mode partition." ::= { lparAimStatLPEntry 63 } lparAimStatLPOpPanel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The operations panel of the partition." ::= { lparAimStatLPEntry 64 } ------------------------------------------------------------ -- The LPAR Statistic Slot Table ------------------------------------------------------------ lparAimStatSlotCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently monitored Slots." ::= { lparAimStatSlotGroup 1 } lparAimStatSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatSlotRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the Slots which are being monitored." ::= { lparAimStatSlotGroup 2 } lparAimStatSlotEntry OBJECT-TYPE SYNTAX LparAimStatSlotRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatSlotInstanceUID, lparAimStatSlotUID } ::= { lparAimStatSlotTable 1 } LparAimStatSlotRow ::= SEQUENCE { lparAimStatSlotInstanceUID Integer32, lparAimStatSlotInstanceName DisplayString, lparAimStatSlotUID Integer32, lparAimStatSlotDRCName DisplayString, lparAimStatSlotDRCIndex Integer32, lparAimStatSlotName DisplayString, lparAimStatSlotDrawer DisplayString, lparAimStatSlotPartition SnmpAdminString, lparAimStatSlotType SnmpAdminString, lparAimStatSlotId DisplayString, lparAimStatSlotVendor SnmpAdminString, lparAimStatSlotParentDRCIndex DisplayString } lparAimStatSlotInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatSlotEntry 1 } lparAimStatSlotInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR plugin instance name." ::= { lparAimStatSlotEntry 2 } lparAimStatSlotUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The Slot unique identifier." ::= { lparAimStatSlotEntry 3 } lparAimStatSlotDRCName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DRC name of the slot." ::= { lparAimStatSlotEntry 4 } lparAimStatSlotDRCIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The DRC Index the slot." ::= { lparAimStatSlotEntry 5 } lparAimStatSlotName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Slot." ::= { lparAimStatSlotEntry 6 } lparAimStatSlotDrawer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The drawer the slot belongs to." ::= { lparAimStatSlotEntry 7 } lparAimStatSlotPartition OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The partition the slot is assigned." ::= { lparAimStatSlotEntry 8 } lparAimStatSlotType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the slot." ::= { lparAimStatSlotEntry 9 } lparAimStatSlotId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the slot." ::= { lparAimStatSlotEntry 10 } lparAimStatSlotVendor OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Vendor of the slot." ::= { lparAimStatSlotEntry 11 } lparAimStatSlotParentDRCIndex OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The parent DRC Index the slot." ::= { lparAimStatSlotEntry 12 } ------------------------------------------------------------ -- The LPAR Statistic Profile Table ------------------------------------------------------------ lparAimStatProfCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of profiles on the System." ::= { lparAimStatProfGroup 1 } lparAimStatProfTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatProfRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the Profiles which are being monitored." ::= { lparAimStatProfGroup 2 } lparAimStatProfEntry OBJECT-TYPE SYNTAX LparAimStatProfRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatProfInstanceUID, lparAimStatProfUID } ::= { lparAimStatProfTable 1 } LparAimStatProfRow ::= SEQUENCE { lparAimStatProfInstanceUID Integer32, lparAimStatProfInstanceName DisplayString, lparAimStatProfUID Integer32, lparAimStatProfName SnmpAdminString, lparAimStatProfSlot DisplayString, lparAimStatProfLP SnmpAdminString, lparAimStatProfDeflt DisplayString, lparAimStatProfMaxCPU Integer32, lparAimStatProfMinCPU Integer32, lparAimStatProfDesCPU Integer32, lparAimStatProfMaxMem Integer32, lparAimStatProfMinMem Integer32, lparAimStatProfDesMem Integer32, lparAimStatProfBootMod DisplayString, lparAimStatProfProcMode DisplayString, lparAimStatProfSharingMode DisplayString } lparAimStatProfInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatProfEntry 1 } lparAimStatProfInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR plugin instance name." ::= { lparAimStatProfEntry 2 } lparAimStatProfUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique identifier of the profile." ::= { lparAimStatProfEntry 3 } lparAimStatProfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Profile." ::= { lparAimStatProfEntry 4 } lparAimStatProfSlot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The slot for the Profile." ::= { lparAimStatProfEntry 5 } lparAimStatProfLP OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The partition to which the profile is associated with." ::= { lparAimStatProfEntry 6 } lparAimStatProfDeflt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Is the profile a default profile for the partition." ::= { lparAimStatProfEntry 7 } lparAimStatProfMaxCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Maximum number of processors that partition can have." ::= { lparAimStatProfEntry 8 } lparAimStatProfMinCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Minimum number of processors that partition should have." ::= { lparAimStatProfEntry 9 } lparAimStatProfDesCPU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Desired number of processors that partition should have." ::= { lparAimStatProfEntry 10 } lparAimStatProfMaxMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Maximum memory ( MB ) that partition can have." ::= { lparAimStatProfEntry 11 } lparAimStatProfMinMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Minimum memory (MB) that partition should have." ::= { lparAimStatProfEntry 12 } lparAimStatProfDesMem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Desired memory ( MB ) that partition should have." ::= { lparAimStatProfEntry 13 } lparAimStatProfBootMod OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Boot mode of the partition." ::= { lparAimStatProfEntry 14 } lparAimStatProfProcMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The processor mode." ::= { lparAimStatProfEntry 15 } lparAimStatProfSharingMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The sharing mode." ::= { lparAimStatProfEntry 16 } ------------------------------------------------------------ -- THE LPAR Statistic System Profile Table ------------------------------------------------------------ lparAimStatSysProfCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of system profiles on the System." ::= { lparAimStatSysProfGroup 1 } lparAimStatSysProfTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatSysProfRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the system profiles." ::= { lparAimStatSysProfGroup 2 } lparAimStatSysProfEntry OBJECT-TYPE SYNTAX LparAimStatSysProfRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatSysProfInstanceUID, lparAimStatSysProfUID } ::= { lparAimStatSysProfTable 1 } LparAimStatSysProfRow ::= SEQUENCE { lparAimStatSysProfInstanceUID Integer32, lparAimStatSysProfInstanceName DisplayString, lparAimStatSysProfUID Integer32, lparAimStatSysProfName SnmpAdminString, lparAimStatSysProfProfiles SnmpAdminString, lparAimStatSysProfPartitions SnmpAdminString } lparAimStatSysProfInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatSysProfEntry 1 } lparAimStatSysProfInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR Plugin instance." ::= { lparAimStatSysProfEntry 2 } lparAimStatSysProfUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The System Profile's unique identifier." ::= { lparAimStatSysProfEntry 3 } lparAimStatSysProfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the System Profile." ::= { lparAimStatSysProfEntry 4 } lparAimStatSysProfProfiles OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The profiles that belong to the System Profile." ::= { lparAimStatSysProfEntry 5 } lparAimStatSysProfPartitions OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The partitions the system profile is associated with." ::= { lparAimStatSysProfEntry 6 } ------------------------------------------------------------ -- The LPAR Statistic Virtual SCSI Table ------------------------------------------------------------ lparAimStatvSCSICount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of virtual SCSI devices hosted in the system." ::= { lparAimStatvSCSIGroup 1 } lparAimStatvSCSITable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatvSCSIRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the virtual SCSI devices." ::= { lparAimStatvSCSIGroup 2 } lparAimStatvSCSIEntry OBJECT-TYPE SYNTAX LparAimStatvSCSIRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatvSCSIInstanceUID, lparAimStatvSCSIUID } ::= { lparAimStatvSCSITable 1 } LparAimStatvSCSIRow ::= SEQUENCE { lparAimStatvSCSIInstanceUID Integer32, lparAimStatvSCSIInstanceName DisplayString, lparAimStatvSCSIUID Integer32, lparAimStatvSCSILPAR SnmpAdminString, lparAimStatvSCSILPARID DisplayString, lparAimStatvSCSISlotNum DisplayString, lparAimStatvSCSIAdapterType SnmpAdminString, lparAimStatvSCSIRemoteLPARID DisplayString, lparAimStatvSCSIRemoteLPAR SnmpAdminString, lparAimStatvSCSIRemoteLPARSlotNum DisplayString, lparAimStatvSCSIIsRequired DisplayString, lparAimStatvSCSIBackingDevice DisplayString } lparAimStatvSCSIInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR Plugin instance name." ::= { lparAimStatvSCSIEntry 1 } lparAimStatvSCSIInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR Plugin instance name." ::= { lparAimStatvSCSIEntry 2 } lparAimStatvSCSIUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The VSCSI's unique identifier." ::= { lparAimStatvSCSIEntry 3 } lparAimStatvSCSILPAR OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the LPAR the virtual SCSI device is being hosted on." ::= { lparAimStatvSCSIEntry 4 } lparAimStatvSCSILPARID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the LPAR the virtual SCSI device is being hosted on." ::= { lparAimStatvSCSIEntry 5 } lparAimStatvSCSISlotNum OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual SCSI device's slot number" ::= { lparAimStatvSCSIEntry 6 } lparAimStatvSCSIAdapterType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of virtual SCSI adapter" ::= { lparAimStatvSCSIEntry 7 } lparAimStatvSCSIRemoteLPARID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The remote LPAR ID that is allowed to connect to this virtual SCSI device" ::= { lparAimStatvSCSIEntry 8 } lparAimStatvSCSIRemoteLPAR OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the remote LPAR that is allowed to connect to this virtual SCSI device" ::= { lparAimStatvSCSIEntry 9 } lparAimStatvSCSIRemoteLPARSlotNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number of the remote LPAR that is allowed to connect to this virtual SCSI device" ::= { lparAimStatvSCSIEntry 10 } lparAimStatvSCSIIsRequired OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the virtual SCSI device is required for the logical partition. Valid values are yes and no." ::= { lparAimStatvSCSIEntry 11 } lparAimStatvSCSIBackingDevice OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The backing physical device for this virtual SCSI device" ::= { lparAimStatvSCSIEntry 12 } ------------------------------------------------------------ -- The LPAR Statistic Virtual Ethernet Table ------------------------------------------------------------ lparAimStatvEthernetCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of virtual Ethernet devices hosted in the system." ::= { lparAimStatvEthernetGroup 1 } lparAimStatvEthernetTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatvEthernetRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the virtual Ethernet devices." ::= { lparAimStatvEthernetGroup 2 } lparAimStatvEthernetEntry OBJECT-TYPE SYNTAX LparAimStatvEthernetRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatvEthernetInstanceUID, lparAimStatvEthernetUID } ::= { lparAimStatvEthernetTable 1 } LparAimStatvEthernetRow ::= SEQUENCE { lparAimStatvEthernetInstanceUID Integer32, lparAimStatvEthernetInstanceName DisplayString, lparAimStatvEthernetUID Integer32, lparAimStatvEthernetLPAR SnmpAdminString, lparAimStatvEthernetLPARID DisplayString, lparAimStatvEthernetSlotNum DisplayString, lparAimStatvEthernetIEEE DisplayString, lparAimStatvEthernetPortVLAN DisplayString, lparAimStatvEthernetAdditionalVLAN DisplayString, lparAimStatvEthernetIsTrunk DisplayString, lparAimStatvEthernetIsRequired DisplayString, lparAimStatvEthernetMACAddress DisplayString } lparAimStatvEthernetInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual Ethernet's unique identifier." ::= { lparAimStatvEthernetEntry 1 } lparAimStatvEthernetInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR Plugin instance name." ::= { lparAimStatvEthernetEntry 2 } lparAimStatvEthernetUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The VEthernet's unique identifier." ::= { lparAimStatvEthernetEntry 3 } lparAimStatvEthernetLPAR OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the LPAR the virtual Ethernet device is being hosted on." ::= { lparAimStatvEthernetEntry 4 } lparAimStatvEthernetLPARID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the LPAR the virtual Ethernet device is being hosted on." ::= { lparAimStatvEthernetEntry 5 } lparAimStatvEthernetSlotNum OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual Ethernet device's slot number" ::= { lparAimStatvEthernetEntry 6 } lparAimStatvEthernetIEEE OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the adapter is an IEEE 802.1Q compatible adapter" ::= { lparAimStatvEthernetEntry 7 } lparAimStatvEthernetPortVLAN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual LAN the virtual Ethernet is connected to" ::= { lparAimStatvEthernetEntry 8 } lparAimStatvEthernetAdditionalVLAN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Additional virtual LANs the virtual Ethernet is connected to" ::= { lparAimStatvEthernetEntry 9 } lparAimStatvEthernetIsTrunk OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the virtual Ethernet adapter is the trunk or uplink adapter for the virtual LAN. Valid values are yes and no." ::= { lparAimStatvEthernetEntry 10 } lparAimStatvEthernetIsRequired OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the virtual Ethernet device is required for the logical partition. Valid values are yes and no." ::= { lparAimStatvEthernetEntry 11 } lparAimStatvEthernetMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the virtual Ethernet device" ::= { lparAimStatvEthernetEntry 12 } ------------------------------------------------------------ -- The LPAR Statistic Virtual Serial Table ------------------------------------------------------------ lparAimStatvSerialCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of virtual serial devices hosted in the system." ::= { lparAimStatvSerialGroup 1 } lparAimStatvSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatvSerialRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the virtual serial devices." ::= { lparAimStatvSerialGroup 2 } lparAimStatvSerialEntry OBJECT-TYPE SYNTAX LparAimStatvSerialRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatvSerialInstanceUID, lparAimStatvSerialUID } ::= { lparAimStatvSerialTable 1 } LparAimStatvSerialRow ::= SEQUENCE { lparAimStatvSerialInstanceUID Integer32, lparAimStatvSerialInstanceName DisplayString, lparAimStatvSerialUID Integer32, lparAimStatvSerialLPAR SnmpAdminString, lparAimStatvSerialLPARID DisplayString, lparAimStatvSerialSlotNum DisplayString, lparAimStatvSerialAdapterType SnmpAdminString, lparAimStatvSerialSupportsHMC DisplayString, lparAimStatvSerialRemoteLPARID DisplayString, lparAimStatvSerialRemoteLPAR SnmpAdminString, lparAimStatvSerialRemoteSlotNum DisplayString, lparAimStatvSerialIsRequired DisplayString } lparAimStatvSerialInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatvSerialEntry 1 } lparAimStatvSerialInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LPAR plugin instance name." ::= { lparAimStatvSerialEntry 2 } lparAimStatvSerialUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual SCSI's unique identifier." ::= { lparAimStatvSerialEntry 3 } lparAimStatvSerialLPAR OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the LPAR the virtual serial device is being hosted on." ::= { lparAimStatvSerialEntry 4 } lparAimStatvSerialLPARID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the LPAR the virtual serial device is being hosted on." ::= { lparAimStatvSerialEntry 5 } lparAimStatvSerialSlotNum OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual serial device's slot number" ::= { lparAimStatvSerialEntry 6 } lparAimStatvSerialAdapterType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of virtual serial device" ::= { lparAimStatvSerialEntry 7 } lparAimStatvSerialSupportsHMC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the serial device can be used by an HMC" ::= { lparAimStatvSerialEntry 8 } lparAimStatvSerialRemoteLPARID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the remote partition the virtual serial device is associated with." ::= { lparAimStatvSerialEntry 9 } lparAimStatvSerialRemoteLPAR OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The remote LPAR that is allowed to connect to this virtual serial device" ::= { lparAimStatvSerialEntry 10 } lparAimStatvSerialRemoteSlotNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The remote LPAR's slot number that is allowed to connect to this virtual serial device" ::= { lparAimStatvSerialEntry 11 } lparAimStatvSerialIsRequired OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the virtual Serial device is required for the logical partition. Valid values are yes and no." ::= { lparAimStatvSerialEntry 12 } ------------------------------------------------------------ -- The LPAR Statistic Virtual Disk Table ------------------------------------------------------------ lparAimStatvDiskCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of physical disk on Virtual I/O Server. Only those disks are displayed, which has PhysicalVolume parameter specified." ::= { lparAimStatvDiskGroup 1 } lparAimStatvDiskTable OBJECT-TYPE SYNTAX SEQUENCE OF LparAimStatvDiskRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the physical disks." ::= { lparAimStatvDiskGroup 2 } lparAimStatvDiskEntry OBJECT-TYPE SYNTAX LparAimStatvDiskRow MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry." INDEX { lparAimStatvDiskInstanceUID, lparAimStatvDiskUID } ::= { lparAimStatvDiskTable 1 } LparAimStatvDiskRow ::= SEQUENCE { lparAimStatvDiskInstanceUID Integer32, lparAimStatvDiskInstanceName DisplayString, lparAimStatvDiskUID Integer32, lparAimStatvDiskLPARID DisplayString, lparAimStatvDiskLPAR SnmpAdminString, lparAimStatvDiskName DisplayString, lparAimStatvDiskActivePercent Integer32, lparAimStatvDiskKBPS Integer32, lparAimStatvDiskTPS Integer32, lparAimStatvDiskKBRead Counter64, lparAimStatvDiskKBWritten Counter64 } lparAimStatvDiskInstanceUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR Instance unique identifier." ::= { lparAimStatvDiskEntry 1 } lparAimStatvDiskInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of LPAR Instance." ::= { lparAimStatvDiskEntry 2 } lparAimStatvDiskUID OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique identifier of physical disk." ::= { lparAimStatvDiskEntry 3 } lparAimStatvDiskLPARID OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR identification number to which this disk belongs to." ::= { lparAimStatvDiskEntry 4 } lparAimStatvDiskLPAR OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "LPAR name to which this disk belongs to." ::= { lparAimStatvDiskEntry 5 } lparAimStatvDiskName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of physical disk." ::= { lparAimStatvDiskEntry 6 } lparAimStatvDiskActivePercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the physical disk was active(bandwidth utilization for the drive)." ::= { lparAimStatvDiskEntry 7 } lparAimStatvDiskKBPS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of data transferred (read or written) to the drive in KB per second." ::= { lparAimStatvDiskEntry 8 } lparAimStatvDiskTPS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transfers per second that were issued to the physical disk. A transfer is an I/O request to the physical disk. Multiple logical requests can be combined into a single I/O request to the disk. A transfer is of indeterminate size." ::= { lparAimStatvDiskEntry 9 } lparAimStatvDiskKBRead OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of KB read." ::= { lparAimStatvDiskEntry 10 } lparAimStatvDiskKBWritten OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of KB written." ::= { lparAimStatvDiskEntry 11 } ------------------------------------------------------------ -- LPAR Deprecated TRAP-TYPE Definitions ------------------------------------------------------------ -- The following traps are deprecated. -- These trap numbers should no more be used. -- lparAimSysStateChangeTrap TRAP-TYPE ::= 165310 -- lparAimSysCfgMonitorChange TRAP-TYPE ::= 165311 -- lparAimSysCfgAlertChange TRAP-TYPE ::= 165312 -- lparAimSysCPUThresholdChange TRAP-TYPE ::= 165313 -- lparAimSysMEMThresholdChange TRAP-TYPE ::= 165314 -- lparAimSysCpuStateChange TRAP-TYPE ::= 165318 -- lparAimLPStateChange TRAP-TYPE ::= 165320 -- lparAimLPMonitor TRAP-TYPE ::= 165323 -- lparAimLPAlert TRAP-TYPE ::= 165324 -- lparAimLPCPUMonitor TRAP-TYPE ::= 165325 -- lparAimLPMemoryMonitor TRAP-TYPE ::= 165326 -- lparAimLPCPULagSetting TRAP-TYPE ::= 165327 -- lparAimLPCPUWarnThreshold TRAP-TYPE ::= 165328 -- lparAimLPCPUCritThreshold TRAP-TYPE ::= 165329 -- lparAimLPMemoryWarnThreshold TRAP-TYPE ::= 165330 -- lparAimLPMemoryCritThreshold TRAP-TYPE ::= 165331 -- lparAimLPMemoryState TRAP-TYPE ::= 165332 -- lparAimLPCPUState TRAP-TYPE ::= 165333 -- lparAimSlotMonitorChange TRAP-TYPE ::= 165343 ------------------------------------------------------------ -- The System TRAP-TYPE Definitions ------------------------------------------------------------ lparAimSysDown NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatHMCName, lparAimStatSysType } STATUS current DESCRIPTION "The system down trap." ::= { sysmgmt 165315 } lparAimSysDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatHMCName, lparAimStatSysType } STATUS current DESCRIPTION "The system delete trap." ::= { sysmgmt 165316 } lparAimSysAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatHMCName, lparAimStatSysType } STATUS current DESCRIPTION "The system added trap." ::= { sysmgmt 165317 } ------------------------------------------------------------ -- The LPAR NOTIFICATION-TYPE Definitions ------------------------------------------------------------ lparAimLPAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatLPName, lparAimStatLPStatus, lparAimStatHMCName, lparAimStatLPId, lparAimStatSysType, lparAimStatLPUID } STATUS current DESCRIPTION "The LP added trap." ::= { sysmgmt 165321 } lparAimLPDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatLPName, lparAimStatHMCName, lparAimStatLPId, lparAimStatSysType, lparAimStatLPUID } STATUS current DESCRIPTION "The LP deleted Trap." ::= { sysmgmt 165322 } ------------------------------------------------------------ -- The Slot NOTIFICATION-TYPE Definitions ------------------------------------------------------------ lparAimSlotAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatSlotDRCName, lparAimStatSlotId, lparAimStatSlotType, lparAimStatSlotPartition } STATUS current DESCRIPTION "The Slot added trap." ::= { sysmgmt 165340 } lparAimSlotDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatSlotDRCName } STATUS current DESCRIPTION "The Slot deleted trap." ::= { sysmgmt 165341 } lparAimSlotLPChange NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatSlotDRCName, lparAimStatSlotId, lparAimStatSlotType, lparAimStatSlotPartition } STATUS current DESCRIPTION "The Slot partition change trap." ::= { sysmgmt 165342 } ------------------------------------------------------------ -- The Profile NOTIFICATION-TYPE Definitions ------------------------------------------------------------ lparAimProfAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatProfName, lparAimStatProfLP } STATUS current DESCRIPTION "The profile added trap." ::= { sysmgmt 165350 } lparAimProfDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatProfName, lparAimStatProfLP } STATUS current DESCRIPTION "The profile deleted trap." ::= { sysmgmt 165351 } ------------------------------------------------------------ -- The System Profile NOTIFICATION-TYPE Definitions ------------------------------------------------------------ lparAimSysProfAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatSysProfName, lparAimStatSysProfPartitions } STATUS current DESCRIPTION "The system profile added trap." ::= { sysmgmt 165360 } lparAimSysProfDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatSysProfName, lparAimStatSysProfPartitions } STATUS current DESCRIPTION "The system profile deleted trap." ::= { sysmgmt 165361 } lparAimSysProfChange NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatSysProfName, lparAimStatSysProfPartitions } STATUS current DESCRIPTION "The system profile change trap." ::= { sysmgmt 165362 } ------------------------------------------------------------ -- The Virtial IO NOTIFICATION-TYPE Definitions ------------------------------------------------------------ lparAimVIOvSCSIAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatvSCSILPAR, lparAimStatvSCSILPARID, lparAimStatvSCSISlotNum, lparAimStatvSCSIAdapterType, lparAimStatvSCSIRemoteLPAR, lparAimStatvSCSIRemoteLPARSlotNum, lparAimStatvSCSIIsRequired, lparAimStatvSCSIBackingDevice, lparAimStatvSCSIUID } STATUS current DESCRIPTION "The VIO Server SCSI added trap." ::= { sysmgmt 165370 } lparAimVIOvSCSIDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatvSCSILPAR, lparAimStatvSCSIAdapterType, lparAimStatvSCSISlotNum, lparAimStatvSCSIUID } STATUS current DESCRIPTION "The VIO Server SCSI deleted trap." ::= { sysmgmt 165371 } lparAimVIOvEthernetAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatvEthernetLPAR, lparAimStatvEthernetLPARID, lparAimStatvEthernetSlotNum, lparAimStatvEthernetIEEE, lparAimStatvEthernetPortVLAN, lparAimStatvEthernetAdditionalVLAN, lparAimStatvEthernetIsTrunk, lparAimStatvEthernetIsRequired, lparAimStatvEthernetMACAddress, lparAimStatvEthernetUID } STATUS current DESCRIPTION "The VIO Server Ethernet added trap." ::= { sysmgmt 165373 } lparAimVIOvEthernetDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatvEthernetLPAR, lparAimStatvEthernetSlotNum, lparAimStatvEthernetUID } STATUS current DESCRIPTION "The VIO Server Ethernet deleted trap." ::= { sysmgmt 165374 } lparAimVIOvSerialAdd NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatvSerialLPAR, lparAimStatvSerialLPARID, lparAimStatvSerialSlotNum, lparAimStatvSerialAdapterType, lparAimStatvSerialSupportsHMC, lparAimStatvSerialRemoteLPARID, lparAimStatvSerialRemoteLPAR, lparAimStatvSerialRemoteSlotNum, lparAimStatvSerialIsRequired } STATUS current DESCRIPTION "The VIO Server Serial added trap." ::= { sysmgmt 165375 } lparAimVIOvSerialDelete NOTIFICATION-TYPE OBJECTS { lparAimStatSysName, lparAimStatvSerialLPAR, lparAimStatvSerialAdapterType, lparAimStatvSerialSlotNum } STATUS current DESCRIPTION "The VIO Server Serial deleted trap." ::= { sysmgmt 165376 } ------------------------------------------------------------ -- The System Instance NOTIFICATION-TYPE Definitions ------------------------------------------------------------ lparAimInstanceAddTrap NOTIFICATION-TYPE OBJECTS { lparAimInstanceUID, lparAimInstanceName, lparAimInstanceSysName, lparAimInstanceHMCName, lparAimInstanceDataStatus } STATUS current DESCRIPTION "LPAR Instance added trap. This trap will be sent when a new LPAR Instance is added, and data in Aim caches were updated according to that change." ::= { sysmgmt 165380 } lparAimInstanceDeleteTrap NOTIFICATION-TYPE OBJECTS { lparAimInstanceUID, lparAimInstanceName, lparAimInstanceSysName, lparAimInstanceHMCName, lparAimInstanceDataStatus } STATUS current DESCRIPTION "LPAR Instance deleted trap. This trap will be sent when a LPAR Instance is deleted, and data in Aim caches were updated according to that change." ::= { sysmgmt 165381 } lparAimInstanceDataStatusChangeTrap NOTIFICATION-TYPE OBJECTS { lparAimInstanceUID, lparAimInstanceName, lparAimInstanceSysName, lparAimInstanceHMCName, lparAimInstanceDataStatus } STATUS current DESCRIPTION "LPAR Instance data status change trap. This trap will be sent when data status of LPAR Instance is changed, and data in Aim caches were updated according to that change. The first DataStatus var is an old value, the second one holds a new value." ::= { sysmgmt 165382 } END