EKINOPS-MGNT2-NMS-MIB

All MIBs › EKINOPS-MGNT2-NMS-MIB

Organization: Ekinops

Last Updated: 2015-11-12

Category: Domain: Optical Transport, Optical and WDM, Technology: Optical Transport, Vendor: Ekinops

Description: Ekinops Management v2 NMS MIB providing network management system integration objects for Ekinops optical transport platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EKINOPS-MGNT2-NMS-MIB?

EKINOPS-MGNT2-NMS-MIB extends the Ekinops management framework with the objects an NMS uses to retrieve and correlate active alarms from an Ekinops 360 network element, following a telecom-style alarm model of probable cause, object class, and severity. It exposes a live active-alarm table plus supporting objects identifying the source board, port type/number, and performance-monitoring source associated with each alarm. This is squarely a fault/status-monitoring MIB: mgnt2ActiveAlmSeverity and mgnt2ActiveAlmProbableCause let an NMS immediately see whether a card, port, or transmission path is in a fault condition, and mgnt2ActiveAlmBoardNumber/SourcePortNumber pinpoint exactly which hardware component is affected. It depends on the shared Ekinops management framework (EKINOPS-MGNT2-MIB for trap configuration, EKINOPS-MIB for OID registration) and follows conventions similar to telecom TMN alarm models. It is deployed on Ekinops 360 optical transport chassis in carrier and enterprise optical networks, typically polled by an EMS/NMS for real-time fault management. Engineers can download the EKINOPS-MGNT2-NMS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EKINOPS-MGNT2-NMS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ekinops 360 optical transport/DWDM chassis
Ekinops optical networking cards/modules

Monitoring Examples

An NMS polls mgnt2ActiveAlmTable/mgnt2ActiveAlmEntry to enumerate all currently active alarms, using mgnt2ActiveAlmSeverity to prioritize a major alarm and mgnt2ActiveAlmBoardNumber plus mgnt2ActiveAlmSourcePortType/SourcePortNumber to identify that, for example, port 3 on board 2 has a loss-of-signal condition. mgnt2ActiveAlmProbableCause and mgnt2ActiveAlmSpecificProblem give the coded reason for the fault, while mgnt2ActiveAlmAdditionalText carries free-form diagnostic detail. mgnt2ActiveAlmSourcePm links the alarm to a performance-monitoring counter, letting an operator correlate a fault with a degrading optical performance metric.

What Can Be Monitored

active alarm list and severity
alarm probable cause and specific problem code
affected board and port identification
alarm additional diagnostic text
linked performance-monitoring source

Imported Objects

From EKINOPS-MIB

EkiOnOff
ekinops	MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

From SNMPv2-TM

SnmpUDPAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR mgnt2ActiveAlmAdditionalText	1.3.6.1.4.1.20044.1000.1.1.1.10	DisplayString	read-only
I32 mgnt2ActiveAlmBoardNumber	1.3.6.1.4.1.20044.1000.1.1.1.5	Integer32	read-only	See textual conventions.
STR mgnt2ActiveAlmChassisId	1.3.6.1.4.1.20044.1000.1.1.1.14	DisplayString	read-only	This OID gives the chassis ID
mgnt2ActiveAlmEntry	1.3.6.1.4.1.20044.1000.1.1.1		not-accessible	Information about a single alarm in the Active Alarm table. Entries in this table are created by SNMP NE and will be automatically deleted by SNMP NE when it is genereted a cleared-alarm.
mgnt2ActiveAlmGroup	1.3.6.1.4.1.20044.1000.2.1.2			This group describes the mandatory objects needed for the Active Alarm management configuration.
IP mgnt2ActiveAlmNodeControllerIpAddress	1.3.6.1.4.1.20044.1000.1.1.1.13	IpAddress	read-only	This OID gives the IP address of the Node Controller
MGN mgnt2ActiveAlmNotificationId	1.3.6.1.4.1.20044.1000.1.1.1.1	Mgnt2NotificationId	read-only	See textual conventions.
MGN mgnt2ActiveAlmObjectClassIdentifier	1.3.6.1.4.1.20044.1000.1.1.1.3	Mgnt2ObjectClassId	read-only	See textual conventions.
MGN mgnt2ActiveAlmProbableCause	1.3.6.1.4.1.20044.1000.1.1.1.2	Mgnt2AlmProbableCause	read-only	See textual conventions.
MGN mgnt2ActiveAlmSeverity	1.3.6.1.4.1.20044.1000.1.1.1.8	Mgnt2AlmSeverity	read-only	See textual conventions.
STR mgnt2ActiveAlmSourcePm	1.3.6.1.4.1.20044.1000.1.1.1.4	DisplayString	read-only	See textual conventions.
I32 mgnt2ActiveAlmSourcePortNumber	1.3.6.1.4.1.20044.1000.1.1.1.7	Integer32	read-only	This OID gives the port number of the PM that sent the last trap
STR mgnt2ActiveAlmSourcePortType	1.3.6.1.4.1.20044.1000.1.1.1.6	DisplayString	read-only	This OID gives the type of the port who sent a trap
STR mgnt2ActiveAlmSpecificProblem	1.3.6.1.4.1.20044.1000.1.1.1.9	DisplayString	read-only	This object contains the alarm specific problem description. Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by characters. The format of the displayString is for further study.
mgnt2ActiveAlmTable	1.3.6.1.4.1.20044.1000.1.1		not-accessible	This table defines the MGNT2-NMS Active Alarm table This table is used by Agent in order to store the active alarms, managing system can only read them.
DAT mgnt2ActiveAlmTime	1.3.6.1.4.1.20044.1000.1.1.1.12	DateAndTime	read-only	This object indicates when the alarm has been generated.
MGN mgnt2ActiveAlmType	1.3.6.1.4.1.20044.1000.1.1.1.11	Mgnt2AlmType	read-only	See textual convention
STR mgnt2AlmLogAdditionalText	1.3.6.1.4.1.20044.1000.1.2.1.10	DisplayString	read-only
MGN mgnt2AlmLogAlarmType	1.3.6.1.4.1.20044.1000.1.2.1.11	Mgnt2AlmType	read-only
I32 mgnt2AlmLogBoardNumber	1.3.6.1.4.1.20044.1000.1.2.1.5	Integer32	read-only	See textual conventions.
STR mgnt2AlmLogChassisId	1.3.6.1.4.1.20044.1000.1.2.1.15	DisplayString	read-only	This OID gives the chassis ID
mgnt2AlmLogEntry	1.3.6.1.4.1.20044.1000.1.2.1		not-accessible	Each entry contains information about single alarm notification. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one.
mgnt2AlmLogGroup	1.3.6.1.4.1.20044.1000.2.1.3			This group describes the mandatory objects needed for the Alarm log management configuration.
IP mgnt2AlmLogNodeControllerIpAddress	1.3.6.1.4.1.20044.1000.1.2.1.14	IpAddress	read-only	This OID gives the IP address of the Node Controller
MGN mgnt2AlmLogNotificationId	1.3.6.1.4.1.20044.1000.1.2.1.1	Mgnt2NotificationId	read-only	See textual conventions.
MGN mgnt2AlmLogObjectClassIdentifier	1.3.6.1.4.1.20044.1000.1.2.1.3	Mgnt2ObjectClassId	read-only	See textual conventions.
MGN mgnt2AlmLogProbableCause	1.3.6.1.4.1.20044.1000.1.2.1.2	Mgnt2AlmProbableCause	read-only	See textual conventions.
MGN mgnt2AlmLogSeverity	1.3.6.1.4.1.20044.1000.1.2.1.8	Mgnt2AlmSeverity	read-only	The perceived severity of the alarm, as specified by the agent that generated it.
STR mgnt2AlmLogSourcePm	1.3.6.1.4.1.20044.1000.1.2.1.4	DisplayString	read-only	See textual conventions.
I32 mgnt2AlmLogSourcePortNumber	1.3.6.1.4.1.20044.1000.1.2.1.7	Integer32	read-only	This OID gives the port number of the PM that sent the last trap
STR mgnt2AlmLogSourcePortType	1.3.6.1.4.1.20044.1000.1.2.1.6	DisplayString	read-only	This OID gives the type of the port who sent a trap
STR mgnt2AlmLogSpecificProblem	1.3.6.1.4.1.20044.1000.1.2.1.9	DisplayString	read-only	See textual conventions. This object is only present if it was included in the alarm trap corresponding to this AlarmLog entry.
mgnt2AlmLogTable	1.3.6.1.4.1.20044.1000.1.2		not-accessible	This table defines the Alarm Log table. It is used to store the alarms generated by SNMP NE.
DAT mgnt2AlmLogTime	1.3.6.1.4.1.20044.1000.1.2.1.13	DateAndTime	read-only	This object indicates when the alarm has been generated.
mgnt2Configuration	1.3.6.1.4.1.20044.1000.1.6
I32 mgnt2ConfigurationActionStatus	1.3.6.1.4.1.20044.1000.1.6.2	Integer32	read-write	0 : activate 1 : activated 2 : failed
I32 mgnt2ConfigurationActivationErrorCode	1.3.6.1.4.1.20044.1000.1.6.3	Integer32	read-only	0 : noError 1 : badValue 2 : missingFile 3 : emptyFile 4 : wrong file
STR mgnt2ConfigurationActivationErrorString	1.3.6.1.4.1.20044.1000.1.6.4	DisplayString	read-only	String explaining Error code. For example, in case of bad value(s), faulty parameter(s) name(s) are given
STR mgnt2ConfigurationChecksum	1.3.6.1.4.1.20044.1000.1.6.1	DisplayString	not-accessible	Entry used to identify uniquely configuration file content. (Used to check alignement between NE configuration and configuration known by NM)
STR mgnt2EventLogAdditionalText	1.3.6.1.4.1.20044.1000.1.3.1.11	DisplayString	read-only
I32 mgnt2EventLogBoardNumber	1.3.6.1.4.1.20044.1000.1.3.1.5	Integer32	read-only	See textual conventions.
STR mgnt2EventLogChassisId	1.3.6.1.4.1.20044.1000.1.3.1.14	DisplayString	read-only	This OID gives the chassis ID
mgnt2EventLogEntry	1.3.6.1.4.1.20044.1000.1.3.1		not-accessible	An entry in the mgnt2EventLogTable
MGN mgnt2EventLogEventType	1.3.6.1.4.1.20044.1000.1.3.1.8	Mgnt2EventType	read-only	This object describes the type of the event logged.
mgnt2EventLogGroup	1.3.6.1.4.1.20044.1000.2.1.4			This group describes the mandatory objects needed for the Event log management configuration.
IP mgnt2EventLogNodeControllerIpAddress	1.3.6.1.4.1.20044.1000.1.3.1.13	IpAddress	read-only	This OID gives the IP address of the Node Controller
MGN mgnt2EventLogNotificationId	1.3.6.1.4.1.20044.1000.1.3.1.1	Mgnt2NotificationId	read-only	See textual conventions.
MGN mgnt2EventLogObjectClassIdentifier	1.3.6.1.4.1.20044.1000.1.3.1.2	Mgnt2ObjectClassId	read-only	See textual conventions.
STR mgnt2EventLogReason	1.3.6.1.4.1.20044.1000.1.3.1.10	DisplayString	read-only
STR mgnt2EventLogSourcePm	1.3.6.1.4.1.20044.1000.1.3.1.4	DisplayString	read-only	See textual conventions.
I32 mgnt2EventLogSourcePortNumber	1.3.6.1.4.1.20044.1000.1.3.1.7	Integer32	read-only	This OID gives the port number of the PM that sent the last trap
STR mgnt2EventLogSourcePortType	1.3.6.1.4.1.20044.1000.1.3.1.6	DisplayString	read-only	This OID gives the type of the port who sent a trap
MGN mgnt2EventLogSourceType	1.3.6.1.4.1.20044.1000.1.3.1.9	Mgnt2EventSourceType	read-only	This object describes the source type of the event logged.
mgnt2EventLogTable	1.3.6.1.4.1.20044.1000.1.3		not-accessible	This table contain information about single event notification not alarm. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one.
DAT mgnt2EventLogTime	1.3.6.1.4.1.20044.1000.1.3.1.12	DateAndTime	read-only	This object indicates when the event has been generated.
mgnt2LacEntry	1.3.6.1.4.1.20044.1000.1.8.1		not-accessible	Entry is automatically created by Agent at start-up time.
I32 mgnt2LacIndex	1.3.6.1.4.1.20044.1000.1.8.1.1	Integer32	read-only	This is the index for the Local Access Control table.
I32 mgnt2LacNoResponseTimeOutPeriod	1.3.6.1.4.1.20044.1000.1.8.1.3	Integer32	read-write	This is the No Response TimeOut Period attribute for the Local Access Control.
MGN mgnt2LacState	1.3.6.1.4.1.20044.1000.1.8.1.2	Mgnt2LacState	read-write	See textual convention
mgnt2LacTable	1.3.6.1.4.1.20044.1000.1.8		not-accessible	The MGNT2 Local Access control table. This table is used to give access to the Craft Terminals or/and NMS.
mgnt2NMS	1.3.6.1.4.1.20044.1000			MIB for managing Ekinops 360 Network Element via a NMS.
mgnt2NMSMibObject	1.3.6.1.4.1.20044.1000.1
mgnt2PolledInfo	1.3.6.1.4.1.20044.1000.1.10
STR mgnt2PolledInfoConfigurationChecksum	1.3.6.1.4.1.20044.1000.1.10.3	DisplayString	read-only	Entry used to identify uniquely configuration file content. (Used to check alignement between NE configuration and configuration known by NM)
C32 mgnt2PolledInfoLastAlarmNotificationId	1.3.6.1.4.1.20044.1000.1.10.1	Counter32	read-only	This object contains the notification identifier of the last alarm stored inside AlarmLog.
C32 mgnt2PolledInfoLastEventNotificationId	1.3.6.1.4.1.20044.1000.1.10.2	Counter32	read-only	This object contains the notification identifier of the last Event stored inside EventLog.
mgnt2SoftwareDownload	1.3.6.1.4.1.20044.1000.1.7
I32 mgnt2SoftwareDownloadActionStatus	1.3.6.1.4.1.20044.1000.1.7.2	Integer32	read-write	0 : activate 1 : downgrade 2 : abort 3 : activated 4 : downgraded 5 : failed
I32 mgnt2SoftwareDownloadActivationAutoRestart	1.3.6.1.4.1.20044.1000.1.7.8	Integer32	read-write	0 : norestart 1 : autorestart
I32 mgnt2SoftwareDownloadActivationClearFile	1.3.6.1.4.1.20044.1000.1.7.6	Integer32	read-write	0 : keepfile 1 : clearfile
I32 mgnt2SoftwareDownloadActivationErrorCode	1.3.6.1.4.1.20044.1000.1.7.3	Integer32	read-only	0 : noError 1 : badValue 2 : missingFile 3 : emptyFile 4 : wrong file
STR mgnt2SoftwareDownloadActivationErrorString	1.3.6.1.4.1.20044.1000.1.7.4	DisplayString	read-only	String explaining Error code. For example, in case of bad value(s), faulty parameter(s) name(s) are given
STR mgnt2SoftwareDownloadActivationFilename	1.3.6.1.4.1.20044.1000.1.7.7	DisplayString	read-write	software file name including eventually file path
MGN mgnt2SoftwareDownloadActivationFileType	1.3.6.1.4.1.20044.1000.1.7.9	Mgnt2DownloadFileType	read-write	File type to download/upload : - 0 : pmPackage - 1 : mgntPackage - 2 : configurationFile - 3 : logFile - 4 : perfFile
I32 mgnt2SoftwareDownloadActivationSlotNumber	1.3.6.1.4.1.20044.1000.1.7.5	Integer32	read-write
mgnt2SupportMc	1.3.6.1.4.1.20044.1000.2.1.1			This module compliance describes a set of objects required for MGNT2-NMS SNMP Agent implementation.
mgnt2SupportMCCompl	1.3.6.1.4.1.20044.1000.2.1
mgnt2SupportMCConf	1.3.6.1.4.1.20044.1000.2
mgnt2SupportMCGroup	1.3.6.1.4.1.20044.1000.2.2
NTF mgnt2TrapNMSAlarm	1.3.6.1.4.1.20044.1000.1.11			This notification reports Alarm event.
NTF mgnt2TrapNMSEvent	1.3.6.1.4.1.20044.1000.1.12			This notification reports an Event.
mgnt2UploadDownload	1.3.6.1.4.1.20044.1000.1.5
MGN mgnt2UploadDownloadActionStatus	1.3.6.1.4.1.20044.1000.1.5.6	Mgnt2UploadDownloadActionStatus	read-write	Entry used to know status of upload/ download to start upload/download operation (Action)
ADR mgnt2UploadDownloadAddress	1.3.6.1.4.1.20044.1000.1.5.2	Mgnt2ServerAddress	read-write	See textual convention
EKI mgnt2UploadDownloadDeleteLastFile	1.3.6.1.4.1.20044.1000.1.5.14	EkiOnOff	read-write
I32 mgnt2UploadDownloadDirection	1.3.6.1.4.1.20044.1000.1.5.8	Integer32	read-write	FTP direction : 0 : From NE to external server 1 : From external server to NE
MGN mgnt2UploadDownloadErrorCode	1.3.6.1.4.1.20044.1000.1.5.7	Mgnt2UploadDownloadErrorCode	read-only	See textual convention
MGN mgnt2UploadDownloadFileCompression	1.3.6.1.4.1.20044.1000.1.5.13	Mgnt2UploadDownloadFileCompression	read-write	See Textual convention
STR mgnt2UploadDownloadFilename	1.3.6.1.4.1.20044.1000.1.5.1	DisplayString	read-write	software file name including eventually file path
MGN mgnt2UploadDownloadFileType	1.3.6.1.4.1.20044.1000.1.5.12	Mgnt2DownloadFileType	read-write	File type to download/upload : - 0 : pmPackage - 1 : mgntPackage - 2 : configurationFile - 3 : logFile - 4 : perfFile
STR mgnt2UploadDownloadLogin	1.3.6.1.4.1.20044.1000.1.5.3	DisplayString	read-write	Login for ftp
STR mgnt2UploadDownloadPasswd	1.3.6.1.4.1.20044.1000.1.5.4	DisplayString	read-write	Password for ftp. A manager sets this value with ftp account password using SNMP. For security reasons if a manager reads this entry, NE must return an empty string (instead of password).
I32 mgnt2UploadDownloadProgress	1.3.6.1.4.1.20044.1000.1.5.9	Integer32	read-write	Percentage of software file(s) downloaded. Only significant in case mgnt2UploadDownloadActionStatus is 'inProgress' or 'automatic'
I32 mgnt2UploadDownloadReceivedFiles	1.3.6.1.4.1.20044.1000.1.5.10	Integer32	read-write	Number of files received during upload/download (significant when status is 'automatic')
I32 mgnt2UploadDownloadRemainingFiles	1.3.6.1.4.1.20044.1000.1.5.11	Integer32	read-write	Number of files remaining for upload/download (significant when status is 'automatic')
I32 mgnt2UploadDownloadTxRetries	1.3.6.1.4.1.20044.1000.1.5.5	Integer32	read-write	Communication retries between the Client and Server. denotes one (first) transmission and no retries in case of failure no re-transmissions are required.

RFC description

Vendor-private MIB for Ekinops Management 2 Network Management System (NMS) interface.

Start monitoring Ekinops 360 optical transport/DWDM chassis (active alarm table) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EKINOPS-MGNT2-NMS-MIB

What Is EKINOPS-MGNT2-NMS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description