EES-POWER-MIB

All MIBs › EES-POWER-MIB

Organization: Emerson Energy Systems (EES)

Last Updated: 2004-06-16

Category: Domain: Power/UPS

Description: Enterprise energy services power MIB for monitoring electrical power consumption, supply status, and energy efficiency metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EES-POWER-MIB?

EES-POWER-MIB is Emerson Energy Systems' (EES) vendor MIB for monitoring DC power/energy systems such as telecom rectifier and battery plants, covering overall system status, electrical measurements, and power supply/battery-related alarms. It exposes identity data (manufacturer, model, controller firmware version), system-level electrical measurements (systemVoltage, systemCurrent, systemUsedCapacity), and component health objects (psStatusCommunication, psStatusBatteryMode) plus an alarm/trap log table. This is squarely a hardware/software status monitoring MIB: systemStatus and psStatusCommunication/psStatusBatteryMode directly report power supply and battery health, while systemVoltage/systemCurrent/systemUsedCapacity provide real-time electrical load and capacity data critical to detecting power system faults, and alarmLastTrapNo/alarmTrapTable log historical alarm events. It follows the general Emerson (EES) enterprise MIB structure (ees/global/ident branches) and standard SNMP alarm/trap conventions. It is typically deployed in telecom central offices or data centers where Emerson DC power plants/rectifier systems are monitored for continuous power availability. Engineers can download the EES-POWER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EES-POWER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Emerson Energy Systems (EES) DC power/rectifier systems

Monitoring Examples

An operator would poll systemVoltage, systemCurrent, and systemUsedCapacity to track the DC power plant's real-time load and detect capacity exhaustion before an outage. psStatusCommunication and psStatusBatteryMode reveal whether a power supply module has lost communication or switched to battery backup mode, both critical fault indicators. alarmLastTrapNo together with alarmTrapTable lets an admin review the history of recent alarm events (e.g., low voltage, battery mode transitions) for root-cause analysis after an incident.

What Can Be Monitored

system voltage
system current
used capacity
power supply communication status
battery mode status
alarm/trap history

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
ees	1.3.6.1.4.1.6302
_pysmi_global	1.3.6.1.4.1.6302.2
powerMIB	1.3.6.1.4.1.6302.2.1			Emerson Energy Systems (EES) Power MIB, revision B.
ident	1.3.6.1.4.1.6302.2.1.1
STR identManufacturer	1.3.6.1.4.1.6302.2.1.1.1	DisplayString	read-only	The name of the equipment manufacturer.
STR identModel	1.3.6.1.4.1.6302.2.1.1.2	DisplayString	read-only	The manufacturers model designation of the power system.
STR identControllerFirmwareVersion	1.3.6.1.4.1.6302.2.1.1.3	DisplayString	read-only	The firmware (software) version of the controller.
STR identName	1.3.6.1.4.1.6302.2.1.1.4	DisplayString	read-write	The name of the power plant. This object should be set by the administrator.
system	1.3.6.1.4.1.6302.2.1.2
STA systemStatus	1.3.6.1.4.1.6302.2.1.2.1	Status	read-only	Status of the complete plant (highest alarm). One of (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) observation - OA, lowest level of 'abnormal' status (4) warning - A3 (5) minor - MA (6) major - CA, highest level of 'abnormal' status (7) unmanaged (8) restricted (9) testing (10) disabled
I32 systemVoltage	1.3.6.1.4.1.6302.2.1.2.2	Integer32	read-only	System voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value.
I32 systemCurrent	1.3.6.1.4.1.6302.2.1.2.3	Integer32	read-only	System current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value.
I32 systemUsedCapacity	1.3.6.1.4.1.6302.2.1.2.4	Integer32	read-only	Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value.
psBattery	1.3.6.1.4.1.6302.2.1.2.5
I32 psBatteryVoltage	1.3.6.1.4.1.6302.2.1.2.5.1	Integer32	read-only	Battery voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value.
I32 psBatteryCurrent	1.3.6.1.4.1.6302.2.1.2.5.2	Integer32	read-only	Battery current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value.
psInput	1.3.6.1.4.1.6302.2.1.2.6
I32 psInputLineAVoltage	1.3.6.1.4.1.6302.2.1.2.6.1	Integer32	read-only	The AC line A voltage, stored as mV. The integer 2147483647 represents invalid value.
I32 psInputLineBVoltage	1.3.6.1.4.1.6302.2.1.2.6.2	Integer32	read-only	The AC line B voltage, stored as mV. The integer 2147483647 represents invalid value.
I32 psInputLineCVoltage	1.3.6.1.4.1.6302.2.1.2.6.3	Integer32	read-only	The AC line C voltage, stored as mV. The integer 2147483647 represents invalid value.
psTemperature	1.3.6.1.4.1.6302.2.1.2.7
I32 psTemperature1	1.3.6.1.4.1.6302.2.1.2.7.1	Integer32	read-only	The first route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value.
I32 psTemperature2	1.3.6.1.4.1.6302.2.1.2.7.2	Integer32	read-only	The second route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value..
INT psStatusCommunication	1.3.6.1.4.1.6302.2.1.2.8	INTEGER	read-only	The status of communication with the Power System. interrupt(3) indicates some errors occurred between Power System and agent.
INT psStatusBatteryMode	1.3.6.1.4.1.6302.2.1.2.9	INTEGER	read-only	The status of battery modes, FloatCharging(2), ShortTest(3), BoostChargingForTest(4), ManualTesting(5), PlanTesting(6), ACFailTesting(7), ACFail(8), ManualBoostCharging(9), AutoBoostCharging(10), CyclicBoostCharging(11), MasterBoostCharging(12), MasterBateryTesting(13).
psSMNumber	1.3.6.1.4.1.6302.2.1.2.10
I32 psSMACNumber	1.3.6.1.4.1.6302.2.1.2.10.1	Integer32	read-only	The number of SM AC module.
I32 psSMBATNumber	1.3.6.1.4.1.6302.2.1.2.10.2	Integer32	read-only	The number of SM BAT module.
I32 psSMIONumber	1.3.6.1.4.1.6302.2.1.2.10.3	Integer32	read-only	The number of SM IO module.
C32 alarmLastTrapNo	1.3.6.1.4.1.6302.2.1.3	Counter32	read-only	The sequence number of last submitted alarm trap, also last row in alarmTrapTable.
alarmTrapTable	1.3.6.1.4.1.6302.2.1.4		not-accessible	Table holding information about the submitted alarm traps.
alarmTrapEntry	1.3.6.1.4.1.6302.2.1.4.1		not-accessible	An entry (conceptual row) in the alarmTrapTable.
C32 alarmTrapNo	1.3.6.1.4.1.6302.2.1.4.1.1	Counter32	read-only	The unique sequence number of this alarm trap.
DAT alarmTime	1.3.6.1.4.1.6302.2.1.4.1.2	DateAndTime	read-only	Date and time when event occured (local time), including timezone if supported by controller.
STA alarmStatusChange	1.3.6.1.4.1.6302.2.1.4.1.3	StatusChange	read-only	The type of alarm change. One of (1) activated (2) deactivated
STA alarmSeverity	1.3.6.1.4.1.6302.2.1.4.1.4	Status	read-only	The severity of the alarm. One of (3) observation - OA, lowest level of alarm severity (4) warning - A3 (5) minor - MA (6) major - CA, highest level of alarm severity
STR alarmDescription	1.3.6.1.4.1.6302.2.1.4.1.5	DisplayString	read-only	Free-text description of alarm.
I32 alarmType	1.3.6.1.4.1.6302.2.1.4.1.6	Integer32	read-only	Alarm type, i.e. an integer specifying the type of alarm.
powerEvents	1.3.6.1.4.1.6302.2.1.5
NTF alarmTrap	1.3.6.1.4.1.6302.2.1.5.1			An alarm trap is sent when an alarm occurs (activated) or returns to normal state (deactivated). Alarm traps are logged in alarmTrapTable. Variables in this trap: * alarmTrapNo - The unique sequence number of this alarm trap. * alarmTime - Date and time when event occured (local time), including timezone if supported by controller. * alarmStatusChange - (1) activated or (2) deactivated. * alarmSeverity - Integer describing the severity of the alarm. * alarmDescription - Free-text description of alarm. * alarmType - Integer indicating type of alarm.

RFC description

Monitors power system status, alarms, and device operational states for Emerson Energy Systems UPS.

Start monitoring Emerson Energy Systems (EES) DC power/rectifier system with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EES-POWER-MIB

What Is EES-POWER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description