E5-110-AESCOMMON-MIB

All MIBs › E5-110-AESCOMMON-MIB

Category: Domain: DSL/xPON, Vendor: Calix

Description: Common management objects for the Calix E5-110 access exchange system (AES) platform shared across E5-110 MIB modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is E5-110-AESCOMMON-MIB?

E5-110-AESCOMMON-MIB is a Calix private MIB providing common definitions, shared object identifiers, and base data types used across the Access Exchange System (AES) module family for the Calix E5-110 carrier-grade access platform. As a common module, it does not itself expose end-user monitoring data but establishes shared structures that other E5-110 AES-specific MIBs build upon to expose interface, service, and performance data. Because no runtime objects are defined here, it has no direct role in monitoring hardware or software status by itself; instead it enables consistent shared monitoring semantics across the suite of E5-110 MIBs that do expose such data. It is a foundational dependency for other Calix E5-110 AES MIB modules and is not usable standalone for polling device state. It is typically deployed alongside other Calix E5-110 MIBs in access networks providing broadband subscriber aggregation. Engineers can download the E5-110-AESCOMMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in E5-110-AESCOMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Calix E5-110 access exchange system

Monitoring Examples

This module defines shared conventions and types rather than pollable runtime objects (no sample objects were captured for it), so there is no standalone monitoring scenario to describe; it exists purely to be imported by other E5-110 AES-family MIBs that expose the actual interface, alarm, and performance tables.

Imported Objects

From E5-110-MIB

aesSeriesCommon

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

DisplayString
ifIndex

From SNMPv2-SMI

Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT aesMaxNumOfProfiles	1.3.6.1.4.1.6321.1.2.3.1.97.1	INTEGER	read-only	The maximum number of ADSL profiles which the system supports.
aesLineConfTable	1.3.6.1.4.1.6321.1.2.3.1.97.2		not-accessible	This table includes common attributes describing the ADSL line.
aesLineConfEntry	1.3.6.1.4.1.6321.1.2.3.1.97.2.1		not-accessible	An entry in aesLineConfTable.
INT aesLineConfAdslMode	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.1	INTEGER	read-write	The mode of the ADSL line.
INT aesLineConfEncap	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.2	INTEGER	read-write	The encapsulation of the ADSL line.
INT aesLineConfVpi	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.3	INTEGER	read-write	The VPI of the ADSL line.
INT aesLineConfVci	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.4	INTEGER	read-write	The VCI of the ADSL line.
INT aesLineConfAnnexL	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.5	INTEGER	read-write	The annex L setting of the ADSL line(Only in AnnexA).
INT aesLineConfPmMode	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.6	INTEGER	read-write	The power management mode of the ADSL line.
INT aesLineConfRateMode	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.7	INTEGER	read-write	Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
INT aesLineConfAnnexM	1.3.6.1.4.1.6321.1.2.3.1.97.2.1.8	INTEGER	read-write	The annex M setting of the ADSL line.
aesLineDiagnostic	1.3.6.1.4.1.6321.1.2.3.1.97.3
INT aesAtucLineDiagLATN	1.3.6.1.4.1.6321.1.2.3.1.97.3.1	INTEGER	read-only	Line Attenuation.
INT aesAtucLineDiagSATN	1.3.6.1.4.1.6321.1.2.3.1.97.3.2	INTEGER	read-only	Signal Attenuation.
INT aesAtucLineDiagSNRM	1.3.6.1.4.1.6321.1.2.3.1.97.3.3	INTEGER	read-only	Signal-to-Noise Ratio Margin.
INT aesAtucLineDiagACTATP	1.3.6.1.4.1.6321.1.2.3.1.97.3.4	INTEGER	read-only	Actual Aggregate Transmit Power.
U32 aesAtucLineDiagATTNDR	1.3.6.1.4.1.6321.1.2.3.1.97.3.5	Unsigned32	read-only	Attainable Net Data Rate, in bps.
INT aesAturLineDiagLATN	1.3.6.1.4.1.6321.1.2.3.1.97.3.6	INTEGER	read-only	Line Attenuation.
INT aesAturLineDiagSATN	1.3.6.1.4.1.6321.1.2.3.1.97.3.7	INTEGER	read-only	Signal Attenuation.
INT aesAturLineDiagSNRM	1.3.6.1.4.1.6321.1.2.3.1.97.3.8	INTEGER	read-only	Signal-to-Noise Ratio Margin.
INT aesAturLineDiagACTATP	1.3.6.1.4.1.6321.1.2.3.1.97.3.9	INTEGER	read-only	Actual Aggregate Transmit Power.
U32 aesAturLineDiagATTNDR	1.3.6.1.4.1.6321.1.2.3.1.97.3.10	Unsigned32	read-only	Attainable Net Data Rate, in bps.
INT aesLineDiagTarget	1.3.6.1.4.1.6321.1.2.3.1.97.3.11	INTEGER	read-write	Ifindex of the ADSL port which will be diagnosed.
INT aesLineDiagOps	1.3.6.1.4.1.6321.1.2.3.1.97.3.12	INTEGER	read-write	The manager sets the object to one to start line diagnostics and the agent clears the object to zero when diagnostics is successfully completed.
STR aesLineDiagFailReason	1.3.6.1.4.1.6321.1.2.3.1.97.3.13	DisplayString	read-only	The reason of failed diagnostics.
aesLineDiagPs	1.3.6.1.4.1.6321.1.2.3.1.97.4
INT aesAtucNumOfSubcarriersPerPort	1.3.6.1.4.1.6321.1.2.3.1.97.4.1	INTEGER	read-only	The number of subcarriers per port for ATU-C.
INT aesAturNumOfSubcarriersPerPort	1.3.6.1.4.1.6321.1.2.3.1.97.4.2	INTEGER	read-only	The number of subcarriers per port for ATU-R.
OCT aesLineDiagPsCCFLirl1	1.3.6.1.4.1.6321.1.2.3.1.97.4.3	OCTET STRING	read-only	Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 1, and the second two octets specify the li.rl value for subcarrier 2, and so on. The object provides li.rl values for subcarrier 1 to 256.
OCT aesLineDiagPsCCFLirl2	1.3.6.1.4.1.6321.1.2.3.1.97.4.4	OCTET STRING	read-only	Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 257, and the second two octets specify the li.rl value for subcarrier 258, and so on. The object provides li.rl values for subcarrier 257 to 512.
OCT aesLineDiagPsCCFLiim1	1.3.6.1.4.1.6321.1.2.3.1.97.4.5	OCTET STRING	read-only	Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 1, and the second two octets specify the li.im value for subcarrier 2, and so on. The object provides li.im values for subcarrier 1 to 256.
OCT aesLineDiagPsCCFLiim2	1.3.6.1.4.1.6321.1.2.3.1.97.4.6	OCTET STRING	read-only	Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 257, and the second two octets specify the li.im value for subcarrier 258, and so on. The object provides li.im values for subcarrier 257 to 512.
OCT aesLineDiagPsCCFLog1	1.3.6.1.4.1.6321.1.2.3.1.97.4.7	OCTET STRING	read-only	Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 1, and the second two octets specify the log value for subcarrier 2, and so on. The object provides log values for subcarrier 1 to 256.
OCT aesLineDiagPsCCFLog2	1.3.6.1.4.1.6321.1.2.3.1.97.4.8	OCTET STRING	read-only	Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 257, and the second two octets specify the log value for subcarrier 258, and so on. The object provides log values for subcarrier 257 to 512.
OCT aesLineDiagPsQLN	1.3.6.1.4.1.6321.1.2.3.1.97.4.9	OCTET STRING	read-only	Quiet Line Noise PSD QLN(f) per subcarrier. The first octet specify QLN for subcarrier 1, and the second octet specify QLN for subcarrier 2, and so on. The object provides QLN for subcarrier 1 to 512.
OCT aesLineDiagPsSNR	1.3.6.1.4.1.6321.1.2.3.1.97.4.10	OCTET STRING	read-only	Signal-to-Noise Ratio SNR(f) per subcarrier. The first octet specify SNR for subcarrier 1, and the second octet specify SNR for subcarrier 2, and so on. The object provides SNR for subcarrier 1 to 512.
INT aesMaxNumOfAlarmProfiles	1.3.6.1.4.1.6321.1.2.3.1.97.5	INTEGER	read-only	The maximum number of ADSL alarm profiles which the system supports.
aesBitLoadingTable	1.3.6.1.4.1.6321.1.2.3.1.97.6		not-accessible	This table provides the number of bits per carrier for each ADSL port.
aesBitLoadingEntry	1.3.6.1.4.1.6321.1.2.3.1.97.6.1		not-accessible	An entry in aesBitLoadingTable.
OCT aesBitLoadingBits	1.3.6.1.4.1.6321.1.2.3.1.97.6.1.1	OCTET STRING	read-only	This object provides the number of bits for all carriers in the port. The first octet specify the number of bits for carrier 1, and the second octet specify the number of bits for carrier 2, and so on. The object provides the number of bits for carrier 1 to 512.
INT aesBitLoadingAtucNumOfCarriers	1.3.6.1.4.1.6321.1.2.3.1.97.6.1.2	INTEGER	read-only	The number of carriers for ATU-C.
INT aesBitLoadingAturNumOfCarriers	1.3.6.1.4.1.6321.1.2.3.1.97.6.1.3	INTEGER	read-only	The number of carriers for ATU-R.
aesLineStatusTable	1.3.6.1.4.1.6321.1.2.3.1.97.7		not-accessible	This table includes the ADSL line status.
aesLineStatusEntry	1.3.6.1.4.1.6321.1.2.3.1.97.7.1		not-accessible	An entry in aesLineStatusTable.
INT aesLineStatusAdslMode	1.3.6.1.4.1.6321.1.2.3.1.97.7.1.1	INTEGER	read-only	The link up mode of the ADSL line.
selt	1.3.6.1.4.1.6321.1.2.3.1.97.8
INT seltTarget	1.3.6.1.4.1.6321.1.2.3.1.97.8.1	INTEGER	read-write	IfIndex of the port which would be performed single end loopback test.
INT seltOps	1.3.6.1.4.1.6321.1.2.3.1.97.8.2	INTEGER	read-write	The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
STR seltStatus	1.3.6.1.4.1.6321.1.2.3.1.97.8.3	DisplayString	read-only	Status description of the selt result.
INT seltCableType	1.3.6.1.4.1.6321.1.2.3.1.97.8.4	INTEGER	read-only	The cable type that selt result indicates.
INT seltLoopEstimateLengthFt	1.3.6.1.4.1.6321.1.2.3.1.97.8.5	INTEGER	read-only	The estimated loop length that selt result indicates.
INT seltLoopEstimateLengthMeter	1.3.6.1.4.1.6321.1.2.3.1.97.8.6	INTEGER	read-only	The estimated loop length that selt result indicates.

RFC description

Manages ADSL line configuration, encapsulation modes, and profile settings for broadband equipment.

Start monitoring Calix E5-110 access exchange system (AES module family, base definitions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download E5-110-AESCOMMON-MIB

What Is E5-110-AESCOMMON-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description