Dell-rlFft

All MIBs › Dell-rlFft

Organization: Dell

Last Updated: 2004-06-01

Category: Vendor: Dell

Description: Manages fast forwarding table (FFT) and hardware-accelerated switching entries on Dell devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Dell-rlFft?

Dell-rlFft is a Dell proprietary MIB (built on RADLAN/Marvell embedded switch software) configuring FFT (Fast Filtering/Forwarding Table, an IP-source-tracking feature) on Dell switches. Its objects cover a MIB-version identifier, maximum FFT entry count, dynamic/subnet/source-address support flags, an unknown-address message-usage flag, aging-time support and value, and red/yellow utilization-boundary percentages for the table. As a configuration/performance MIB it lets an administrator watch FFT table utilization against its red/yellow boundaries to catch the table approaching capacity. It is deployed on Dell switches (RADLAN/Marvell-based) with the FFT feature. Engineers can download the Dell-rlFft file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-rlFft. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell managed switches (RADLAN/Marvell-based)

Monitoring Examples

An administrator monitors current FFT table usage against rlIpFftYellowBoundary and rlIpFftRedBoundary to get advance warning before the table fills and new source addresses can no longer be tracked.

What Can Be Monitored

FFT (Fast Filtering Table) utilization vs. red/yellow boundaries

Imported Objects

From Dell-MIB

rnd	MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlFFT	1.3.6.1.4.1.89.47			The private MIB module definition for RND Fast Forwarding Tables.
rlIpFFT	1.3.6.1.4.1.89.47.1
INT rlIpFftMibVersion	1.3.6.1.4.1.89.47.1.1	INTEGER	read-only	MIB's version, the current version is 1.
INT rlInetMaxFftNumber	1.3.6.1.4.1.89.47.1.2	INTEGER	read-only	The maximum number of IP FFTs.
INT rlInetFftDynamicSupported	1.3.6.1.4.1.89.47.1.3	INTEGER	read-only	Specifies whether dynamic IP FFTs are supported.
INT rlInetFftSubnetSupported	1.3.6.1.4.1.89.47.1.4	INTEGER	read-only	Specifies whether subtable per IP subnet is supported.
INT rlIpFftUnknownAddrMsgUsed	1.3.6.1.4.1.89.47.1.5	INTEGER	read-only	Specifies whether the 3SW uses the unknown address message.
INT rlInetFftAgingTimeSupported	1.3.6.1.4.1.89.47.1.6	INTEGER	read-only	Specifies whether aging time is supported.
INT rlIpFftSrcAddrSupported	1.3.6.1.4.1.89.47.1.7	INTEGER	read-only	Specifies whether an IP subtable per station contains source IP address.
INT rlInetFftAgingTimeout	1.3.6.1.4.1.89.47.1.8	INTEGER	read-write	The aging timeout in seconds.
PER rlIpFftRedBoundary	1.3.6.1.4.1.89.47.1.9	Percents	read-write	The red boundary in percents.
PER rlIpFftYellowBoundary	1.3.6.1.4.1.89.47.1.10	Percents	read-write	The yellow boundary in percents.
rlInetFftNumTable	1.3.6.1.4.1.89.47.1.12		not-accessible	The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs.
rlInetFftNumEntry	1.3.6.1.4.1.89.47.1.12.1		not-accessible	An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT
INT rlInetFftNumIndex	1.3.6.1.4.1.89.47.1.12.1.1	INTEGER	read-only	The value of the index of the IP FFT.
IPt rlInetFftNumAddressType	1.3.6.1.4.1.89.47.1.12.1.2	InetAddressType	read-only	The inet address type that are contained in the IP SFFT.
INT rlInetFftNumStnRoutesNumber	1.3.6.1.4.1.89.47.1.12.1.3	INTEGER	read-only	The number of routes that are contained in the IP SFFT.
INT rlInetFftNumSubRoutesNumber	1.3.6.1.4.1.89.47.1.12.1.4	INTEGER	read-only	The number of routes that are contained in the IP NFFT.
INT rlInetFftNumInetTomeRoutesNumber	1.3.6.1.4.1.89.47.1.12.1.5	INTEGER	read-only	The number of routes that are Inet To Me.
rlInetFftStnTable	1.3.6.1.4.1.89.47.1.13		not-accessible	The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams.
rlInetFftStnEntry	1.3.6.1.4.1.89.47.1.13.1		not-accessible	An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
INT rlInetFftStnIndex	1.3.6.1.4.1.89.47.1.13.1.1	INTEGER	read-only	The value of the index of the IP FFT.
INT rlInetFftStnMrid	1.3.6.1.4.1.89.47.1.13.1.2	INTEGER	read-only	The router's Instance Identifier in the SFFT.
IPt rlInetFftStnDstInetAddressType	1.3.6.1.4.1.89.47.1.13.1.3	InetAddressType	read-only	The Ip destination type for which this entry contains IP forwarding information.
IP rlInetFftStnDstInetAddress	1.3.6.1.4.1.89.47.1.13.1.4	InetAddress	read-only	The IP destination address for which this entry contains IP forwarding information.
ADR rlInetFftStnDstRouteInetPrefix	1.3.6.1.4.1.89.47.1.13.1.5	InetAddressPrefixLength	read-only	The IP destination prefix for which this entry contains IP forwarding information.
INT rlInetFftStnDstInetAddrType	1.3.6.1.4.1.89.47.1.13.1.6	INTEGER	read-only	The IP destination address type.
PHY rlInetFftStnDstMacAddress	1.3.6.1.4.1.89.47.1.13.1.7	PhysAddress	read-only	The MAC destination address.
PHY rlInetFftStnSrcMacAddress	1.3.6.1.4.1.89.47.1.13.1.8	PhysAddress	read-only	The MAC source address.
INT rlInetFftStnOutIfIndex	1.3.6.1.4.1.89.47.1.13.1.9	INTEGER	read-only	The value of ifIndex of output physical port.
INT rlInetFftStnVid	1.3.6.1.4.1.89.47.1.13.1.10	INTEGER	read-only	The vid of the output port.
INT rlInetFftStnTaggedMode	1.3.6.1.4.1.89.47.1.13.1.11	INTEGER	read-only	The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value
INT rlInetFftStnAge	1.3.6.1.4.1.89.47.1.13.1.12	INTEGER	read-only	The age of the entry in seconds from the inserting.
rlInetFftSubTable	1.3.6.1.4.1.89.47.1.14		not-accessible	The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams.
rlInetFftSubEntry	1.3.6.1.4.1.89.47.1.14.1		not-accessible	An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
INT rlInetFftSubMrid	1.3.6.1.4.1.89.47.1.14.1.1	INTEGER	read-only	The router's Instance Identifier in the NFFT.
IPt rlInetFftSubDstInetSubnetType	1.3.6.1.4.1.89.47.1.14.1.2	InetAddressType	read-only	The IP destination subnet type for which this entry contains IP forwarding information.
IP rlInetFftSubDstInetSubnet	1.3.6.1.4.1.89.47.1.14.1.3	InetAddress	read-only	The IP destination subnet for which this entry contains IP forwarding information.
ADR rlInetFftSubDstInetPrefix	1.3.6.1.4.1.89.47.1.14.1.4	InetAddressPrefixLength	read-only	The IP destination prefix for which this entry contains IP forwarding information.
INT rlInetFftSubNextHopSetRefCount	1.3.6.1.4.1.89.47.1.14.1.5	INTEGER	read-only	The number of NFFT entries that used the given NextHop set (ECMP path).
INT rlInetFftSubNextHopCount	1.3.6.1.4.1.89.47.1.14.1.6	INTEGER	read-only	The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex1	1.3.6.1.4.1.89.47.1.14.1.7	INTEGER	read-only	The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr1Type	1.3.6.1.4.1.89.47.1.14.1.8	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr1	1.3.6.1.4.1.89.47.1.14.1.9	InetAddress	read-only	The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex2	1.3.6.1.4.1.89.47.1.14.1.10	INTEGER	read-only	The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr2Type	1.3.6.1.4.1.89.47.1.14.1.11	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr2	1.3.6.1.4.1.89.47.1.14.1.12	InetAddress	read-only	The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex3	1.3.6.1.4.1.89.47.1.14.1.13	INTEGER	read-only	The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr3Type	1.3.6.1.4.1.89.47.1.14.1.14	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr3	1.3.6.1.4.1.89.47.1.14.1.15	InetAddress	read-only	The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex4	1.3.6.1.4.1.89.47.1.14.1.16	INTEGER	read-only	The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr4Type	1.3.6.1.4.1.89.47.1.14.1.17	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr4	1.3.6.1.4.1.89.47.1.14.1.18	InetAddress	read-only	The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex5	1.3.6.1.4.1.89.47.1.14.1.19	INTEGER	read-only	The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr5Type	1.3.6.1.4.1.89.47.1.14.1.20	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr5	1.3.6.1.4.1.89.47.1.14.1.21	InetAddress	read-only	The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex6	1.3.6.1.4.1.89.47.1.14.1.22	INTEGER	read-only	The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr6Type	1.3.6.1.4.1.89.47.1.14.1.23	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr6	1.3.6.1.4.1.89.47.1.14.1.24	InetAddress	read-only	The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex7	1.3.6.1.4.1.89.47.1.14.1.25	INTEGER	read-only	The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr7Type	1.3.6.1.4.1.89.47.1.14.1.26	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr7	1.3.6.1.4.1.89.47.1.14.1.27	InetAddress	read-only	The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubNextHopIfindex8	1.3.6.1.4.1.89.47.1.14.1.28	INTEGER	read-only	The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
IPt rlInetFftSubNextHopInetAddr8Type	1.3.6.1.4.1.89.47.1.14.1.29	InetAddressType	read-only	The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
IP rlInetFftSubNextHopInetAddr8	1.3.6.1.4.1.89.47.1.14.1.30	InetAddress	read-only	The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
INT rlInetFftSubAge	1.3.6.1.4.1.89.47.1.14.1.31	INTEGER	read-only	The age of the entry in seconds from the inserting.
rlInetFftCountersTable	1.3.6.1.4.1.89.47.1.15		not-accessible	The (conceptual) table containing IP Counters information per one IP FFT.
rlInetFftCountersEntry	1.3.6.1.4.1.89.47.1.15.1		not-accessible	An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT.
INT rlInetFftCountersIndex	1.3.6.1.4.1.89.47.1.15.1.1	INTEGER	read-only	The value of the index of the IP FFT.
INT rlInetFftInReceives	1.3.6.1.4.1.89.47.1.15.1.2	INTEGER	read-only	The amount of received IP datagrams
INT rlInetFftForwDatagrams	1.3.6.1.4.1.89.47.1.15.1.3	INTEGER	read-only	The amount of forwarded IP datagrams
INT rlInetFftInDiscards	1.3.6.1.4.1.89.47.1.15.1.4	INTEGER	read-only	The amount of discarded IP datagrams
rlInetFftNextHopTable	1.3.6.1.4.1.89.47.1.16		not-accessible	The (conceptual) table contains NextHop information used for routing IP datagrams.
rlInetFftNextHopEntry	1.3.6.1.4.1.89.47.1.16.1		not-accessible	An entry (conceptual row) contains the NextHop info information for routing IP datagrams.
INT rlInetFftNextHopifindex	1.3.6.1.4.1.89.47.1.16.1.1	INTEGER	read-only	The value of the IP Interface index of the NextHop.
IPt rlInetFftNextHopInetAddressType	1.3.6.1.4.1.89.47.1.16.1.2	InetAddressType	read-only	The IP address type of a NextHop for which an entry contains IP forwarding information.
IP rlInetFftNextHopInetAddress	1.3.6.1.4.1.89.47.1.16.1.3	InetAddress	read-only	The IP address of a NextHop for which an entry contains IP forwarding information.
INT rlInetFftNextHopValid	1.3.6.1.4.1.89.47.1.16.1.4	INTEGER	read-only	The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value.
INT rlInetFftNextHopType	1.3.6.1.4.1.89.47.1.16.1.5	INTEGER	read-only	The NextHop type.
INT rlInetFftNextHopReferenceCount	1.3.6.1.4.1.89.47.1.16.1.6	INTEGER	read-only	IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop.
PHY rlInetFftNextHopNetAddress	1.3.6.1.4.1.89.47.1.16.1.7	PhysAddress	read-only	The NextHop Physical Address.
INT rlInetFftNextHopVid	1.3.6.1.4.1.89.47.1.16.1.8	INTEGER	read-only	The vid of the output port.
PHY rlInetFftNextHopMacAddress	1.3.6.1.4.1.89.47.1.16.1.9	PhysAddress	read-only	The MAC destination address.
INT rlInetFftNextHopOutIfIndex	1.3.6.1.4.1.89.47.1.16.1.10	INTEGER	read-only	The value of ifIndex of output physical port.
rlInetFftL2InfoTable	1.3.6.1.4.1.89.47.1.17		not-accessible	The (conceptual) table contains L2 information used for routing IP datagrams.
rlInetFftL2InfoEntry	1.3.6.1.4.1.89.47.1.17.1		not-accessible	An entry (conceptual row) contains the L2 info information for routing IP datagrams.
INT rlInetFftL2InfoIfindex	1.3.6.1.4.1.89.47.1.17.1.1	INTEGER	read-only	The VLAN Ifindex of the destination port.
PHY rlInetFftL2InfoDstMacAddress	1.3.6.1.4.1.89.47.1.17.1.2	PhysAddress	read-only	The MAC destination address.
INT rlInetFftL2InfoValid	1.3.6.1.4.1.89.47.1.17.1.3	INTEGER	read-only	The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value.
INT rlInetFftL2InfoType	1.3.6.1.4.1.89.47.1.17.1.4	INTEGER	read-only	The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded.
INT rlInetFftL2InfoReferenceCount	1.3.6.1.4.1.89.47.1.17.1.5	INTEGER	read-only	The reference count contains a number of NextHop entries that use this L2 info.
INT rlInetFftL2InfoVid	1.3.6.1.4.1.89.47.1.17.1.6	INTEGER	read-only	The vid of the destination port.
PHY rlInetFftL2InfoSrcMacAddress	1.3.6.1.4.1.89.47.1.17.1.7	PhysAddress	read-only	The MAC source address placed to Ehernet Header of IP forwarded packet.
INT rlInetFftL2InfoOutIfIndex	1.3.6.1.4.1.89.47.1.17.1.8	INTEGER	read-only	The value of ifIndex of output physical port the packet is forwarded through.
INT rlInetFftL2InfoTaggedMode	1.3.6.1.4.1.89.47.1.17.1.9	INTEGER	read-only	The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value.
PER rlIpv6FftRedBoundary	1.3.6.1.4.1.89.47.1.18	Percents	read-write	The red boundary in percents.
PER rlIpv6FftYellowBoundary	1.3.6.1.4.1.89.47.1.19	Percents	read-write	The yellow boundary in percents.
rlIpxFFT	1.3.6.1.4.1.89.47.2
INT rlIpxFftMibVersion	1.3.6.1.4.1.89.47.2.1	INTEGER	read-only	MIB's version, the current version is 1.
INT rlIpxMaxFftNumber	1.3.6.1.4.1.89.47.2.2	INTEGER	read-only	The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber.
INT rlIpxFftDynamicSupported	1.3.6.1.4.1.89.47.2.3	INTEGER	read-only	Specifies whether dynamic IPX FFTs are supported.
INT rlIpxFftNetworkSupported	1.3.6.1.4.1.89.47.2.4	INTEGER	read-only	Specifies whether subtable per IPX network is supported.
INT rlIpxFftUnknownAddrMsgUsed	1.3.6.1.4.1.89.47.2.5	INTEGER	read-only	Specifies whether the 3SW uses the unknown address message.
INT rlIpxFftAgingTimeSupported	1.3.6.1.4.1.89.47.2.6	INTEGER	read-only	Specifies whether aging time is supported for subtable per station.
INT rlIpxFftSrcAddrSupported	1.3.6.1.4.1.89.47.2.7	INTEGER	read-only	Specifies whether an IPX subtable per station contains source IPX address.
INT rlIpxFftAgingTimeout	1.3.6.1.4.1.89.47.2.8	INTEGER	read-write	The aging timeout in seconds.
INT rlIpxFftRedBoundary	1.3.6.1.4.1.89.47.2.9	INTEGER	read-write	The red boundary in percents.
PER rlIpxFftYellowBoundary	1.3.6.1.4.1.89.47.2.10	Percents	read-write	The yellow boundary in percents.
rlIpxFftNumTable	1.3.6.1.4.1.89.47.2.12		not-accessible	The (conceptual) table containing number routes of the IPX Fast Forwarding Table.
rlIpxFftNumEntry	1.3.6.1.4.1.89.47.2.12.1		not-accessible	An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT
INT rlIpxFftNumIndex	1.3.6.1.4.1.89.47.2.12.1.1	INTEGER	read-only	The value of the index of the IPX FFT.
INT rlIpxFftNumStnRoutesNumber	1.3.6.1.4.1.89.47.2.12.1.2	INTEGER	read-only	The number of routes containing in the IPX SFFT.
INT rlIpxFftNumSubRoutesNumber	1.3.6.1.4.1.89.47.2.12.1.3	INTEGER	read-only	The number of routes containing in the IPX NFFT.
rlIpxFftStnTable	1.3.6.1.4.1.89.47.2.13		not-accessible	The (conceptual) table containing IPX Fast Forwarding information per station for IPX.
rlIpxFftStnEntry	1.3.6.1.4.1.89.47.2.13.1		not-accessible	An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
INT rlIpxFftStnIndex	1.3.6.1.4.1.89.47.2.13.1.1	INTEGER	read-only	The value of the index of the IPX FFT.
NET rlIpxFftStnDstNetid	1.3.6.1.4.1.89.47.2.13.1.2	NetNumber	read-only	The destination network for which this entry contains IPX forwarding information.
PHY rlIpxFftStnDstNode	1.3.6.1.4.1.89.47.2.13.1.3	PhysAddress	read-only	The destination node for which this entry contains IPX forwarding information.
NET rlIpxFftStnSrcNetid	1.3.6.1.4.1.89.47.2.13.1.4	NetNumber	read-only	The source network for which this entry contains IPX forwarding information.
PHY rlIpxFftStnSrcNode	1.3.6.1.4.1.89.47.2.13.1.5	PhysAddress	read-only	The destination node for which this entry contains IPX forwarding information.
INT rlIpxFftStnDstIpxAddrType	1.3.6.1.4.1.89.47.2.13.1.6	INTEGER	read-only	The destination address type.
INT rlIpxFftStnEncapsulation	1.3.6.1.4.1.89.47.2.13.1.7	INTEGER	read-only	The encapsulation method associated with this route.
PHY rlIpxFftStnDstMacAddress	1.3.6.1.4.1.89.47.2.13.1.8	PhysAddress	read-only	The MAC destination address.
PHY rlIpxFftStnSrcMacAddress	1.3.6.1.4.1.89.47.2.13.1.9	PhysAddress	read-only	The MAC source address.
INT rlIpxFftStnOutIfIndex	1.3.6.1.4.1.89.47.2.13.1.10	INTEGER	read-only	The value of ifIndex of output physical port.
INT rlIpxFftStnTci	1.3.6.1.4.1.89.47.2.13.1.11	INTEGER	read-only	The value of TCI or 0.
INT rlIpxFftStnFacsIndex	1.3.6.1.4.1.89.47.2.13.1.12	INTEGER	read-only	The value of index of the FACS Table.
INT rlIpxFftStnAge	1.3.6.1.4.1.89.47.2.13.1.13	INTEGER	read-only	The age of the entry in seconds.
rlIpxFftSubTable	1.3.6.1.4.1.89.47.2.14		not-accessible	The (conceptual) table containing IPX Fast Forwarding information per network for IPX .
rlIpxFftSubEntry	1.3.6.1.4.1.89.47.2.14.1		not-accessible	An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
INT rlIpxFftSubIndex	1.3.6.1.4.1.89.47.2.14.1.1	INTEGER	read-only	The value of the index of the IPX FFT.
NET rlIpxFftSubDstNetid	1.3.6.1.4.1.89.47.2.14.1.2	NetNumber	read-only	The destination network for which this entry contains IPX forwarding information.
INT rlIpxFftSubEncapsulation	1.3.6.1.4.1.89.47.2.14.1.3	INTEGER	read-only	The encapsulation method associated with this route.
PHY rlIpxFftSubDstMacAddress	1.3.6.1.4.1.89.47.2.14.1.4	PhysAddress	read-only	The MAC destination address.
PHY rlIpxFftSubSrcMacAddress	1.3.6.1.4.1.89.47.2.14.1.5	PhysAddress	read-only	The MAC source address.
INT rlIpxFftSubOutIfIndex	1.3.6.1.4.1.89.47.2.14.1.6	INTEGER	read-only	The value of ifIndex of output physical port.
INT rlIpxFftSubTci	1.3.6.1.4.1.89.47.2.14.1.7	INTEGER	read-only	The value of TCI or 0.
INT rlIpxFftSubFacsIndex	1.3.6.1.4.1.89.47.2.14.1.8	INTEGER	read-only	The value of index of the FACS Table.
INT rlIpxFftSubAge	1.3.6.1.4.1.89.47.2.14.1.9	INTEGER	read-only	The age of the entry in seconds.
rlIpxFftCountersTable	1.3.6.1.4.1.89.47.2.15		not-accessible	The (conceptual) table containing IPX Counters information per one IPX FFT.
rlIpxFftCountersEntry	1.3.6.1.4.1.89.47.2.15.1		not-accessible	An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT.
INT rlIpxFftCountersIndex	1.3.6.1.4.1.89.47.2.15.1.1	INTEGER	read-only	The value of the index of the IPX FFT.
INT rlIpxFftInReceives	1.3.6.1.4.1.89.47.2.15.1.2	INTEGER	read-only	The amount of received IPX datagrams
INT rlIpxFftForwDatagrams	1.3.6.1.4.1.89.47.2.15.1.3	INTEGER	read-only	The amount of forwarded IPX datagrams
INT rlIpxFftInDiscards	1.3.6.1.4.1.89.47.2.15.1.4	INTEGER	read-only	The amount of discarded IPX datagrams
rlIpmFFT	1.3.6.1.4.1.89.47.3
INT rlIpmFftMibVersion	1.3.6.1.4.1.89.47.3.1	INTEGER	read-only	MIB's version, the current version is 1.
INT rlIpmMaxFftNumber	1.3.6.1.4.1.89.47.3.2	INTEGER	read-only	The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters
INT rlIpmFftDynamicSupported	1.3.6.1.4.1.89.47.3.3	INTEGER	read-only	Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters
INT rlIpmFftUnknownAddrMsgUsed	1.3.6.1.4.1.89.47.3.4	INTEGER	read-only	Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters
U32 rlIpmFftUserAgingTimeout	1.3.6.1.4.1.89.47.3.5	Unsigned32	read-write	The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout.
INT rlIpmFftRouterAgingTimeout	1.3.6.1.4.1.89.47.3.6	INTEGER	read-only	The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout.
rlIpmFftNumTable	1.3.6.1.4.1.89.47.3.8		not-accessible	The (conceptual) table containing number routes of the IPM Fast Forwarding Table.
rlIpmFftNumEntry	1.3.6.1.4.1.89.47.3.8.1		not-accessible	An entry (conceptual row) containing the containing number routes of an IPM FFT.
INT rlIpmFftNumIndex	1.3.6.1.4.1.89.47.3.8.1.1	INTEGER	read-only	The value of the index of the IPM FFT.
INT rlIpmFftNumRoutesNumber	1.3.6.1.4.1.89.47.3.8.1.2	INTEGER	read-only	The number of routes containing in the IPM FFT.
rlIpmFftTable	1.3.6.1.4.1.89.47.3.9		not-accessible	The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams.
rlIpmFftEntry	1.3.6.1.4.1.89.47.3.9.1		not-accessible	An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses.
INT rlIpmFftIndex	1.3.6.1.4.1.89.47.3.9.1.1	INTEGER	read-only	The value of the index of the IPM FFT.
IP rlIpmFftSrcIpAddress	1.3.6.1.4.1.89.47.3.9.1.2	IpAddress	read-only	The IP source address for which this entry contains IPM forwarding information.
IP rlIpmFftDstIpAddress	1.3.6.1.4.1.89.47.3.9.1.3	IpAddress	read-only	The IPM destination address for which this entry contains IPM forwarding information.
IP rlIpmFftSrcIpMask	1.3.6.1.4.1.89.47.3.9.1.4	IpAddress	read-only	The IP source mask for which this entry contains IP forwarding information.
INT rlIpmFftInputIfIndex	1.3.6.1.4.1.89.47.3.9.1.5	INTEGER	read-only	The input ifIndex for which this entry contains IPM forwarding information.
INT rlIpmFftInputVlanTag	1.3.6.1.4.1.89.47.3.9.1.6	INTEGER	read-only	The input Vlan tag together with input ifIndex defines pair (ifIndex, tag)
INT rlIpmFftForwardAction	1.3.6.1.4.1.89.47.3.9.1.7	INTEGER	read-only	The IPM forward action.
INT rlIpmFftInportAction	1.3.6.1.4.1.89.47.3.9.1.8	INTEGER	read-only	The IPM illegal input port action.
INT rlIpmFftAge	1.3.6.1.4.1.89.47.3.9.1.9	INTEGER	read-only	The age of the entry in seconds from the moment of inserting.
rlIpmFftPortTagTable	1.3.6.1.4.1.89.47.3.10		not-accessible	The (conceptual) table containing IPM FFT output port tag information for IPM datagrams.
rlIpmFftPortTagEntry	1.3.6.1.4.1.89.47.3.10.1		not-accessible	An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses.
INT rlIpmFftPortIndex	1.3.6.1.4.1.89.47.3.10.1.1	INTEGER	read-only	The value of the index of the IPM FFT.
IP rlIpmFftPortSrcIpAddress	1.3.6.1.4.1.89.47.3.10.1.2	IpAddress	read-only	The IP source address for which this entry contains IPM output port tag information.
IP rlIpmFftPortDstIpAddress	1.3.6.1.4.1.89.47.3.10.1.3	IpAddress	read-only	The IPM destination address for which this entry contains IPM port tag information.
INT rlIpmFftPortOutputifIndex	1.3.6.1.4.1.89.47.3.10.1.4	INTEGER	read-only	The output ifIndex
INT rlIpmFftPortOutputTag	1.3.6.1.4.1.89.47.3.10.1.5	INTEGER	read-only	The output Vlan tag together with output ifIndex defines pair (ifIndex, tag)
rlIpmFftCountersTable	1.3.6.1.4.1.89.47.3.11		not-accessible	The (conceptual) table containing IPM Counters information per FFT number.
rlIpmFftCountersEntry	1.3.6.1.4.1.89.47.3.11.1		not-accessible	An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT.
INT rlIpmFftCountersIndex	1.3.6.1.4.1.89.47.3.11.1.1	INTEGER	read-only	The value of the index of the IPM FFT.
INT rlIpmFftInReceives	1.3.6.1.4.1.89.47.3.11.1.2	INTEGER	read-only	The amount of received IPM datagrams
INT rlIpmFftForwDatagrams	1.3.6.1.4.1.89.47.3.11.1.3	INTEGER	read-only	The amount of forwarded IPM datagrams
INT rlIpmFftInDiscards	1.3.6.1.4.1.89.47.3.11.1.4	INTEGER	read-only	The amount of discarded IPM datagrams

RFC description

Dell fast forwarding table (FFT) MIB for managing IP routing table acceleration and dynamic forwarding path optimization.

Start monitoring Dell managed switch, RADLAN/Marvell-based (Fast Filtering/Forwarding Table) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-rlFft

What Is Dell-rlFft?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description