Dell-QOS-CLI-MIB

All MIBs › Dell-QOS-CLI-MIB

Organization: Dell

Last Updated: 2006-04-04

Category: Technology: QoS, Vendor: Dell

Description: Provides QoS configuration objects via SNMP mirroring CLI-based quality of service settings on Dell switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Dell-QOS-CLI-MIB?

Dell-QOS-CLI-MIB is a Dell private MIB (under the shared "rnd" enterprise branch, using the same "rlQos" object-naming convention found in other switch-silicon-derived MIBs) that mirrors CLI-configured Quality of Service settings on Dell managed switches via SNMP. It defines an extensive set of tables covering ACL-based classification — rlQosOffsetTable and rlQosTupleTable for byte-offset and protocol-tuple match criteria, rlQosAceTable for individual access-control-elements, and rlQosAclTable/rlQosAclAceRefTable tying ACEs together into access lists — alongside queue-profile, DSCP-to-queue mapping, per-port rate limiting (policer CIR/CBS), and statistics tables (per-port policy counters, single/aggregate policer counters, output-queue counters). This lets an operator see exactly how traffic is being classified, policed, and queued at the port level, which is essential for diagnosing why certain flows are being dropped, remarked, or queued incorrectly under QoS policy. It depends on Q-BRIDGE-MIB (for VLAN/port list types) and companion Dell MIBs (Dell-POLICY-MIB, Dell-BRIDGEMIBOBJECTS-MIB, Dell-MIB) for shared textual conventions. It is deployed on Dell PowerConnect/Networking managed switches; administrators can download the Dell-QOS-CLI-MIB file to load it into their MIB browser for SNMP monitoring of these QoS settings.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-QOS-CLI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell PowerConnect / Dell Networking managed switches

Monitoring Examples

An operator polls rlQosAclTable and rlQosAceTable to confirm which access-control elements are bound to a port's policy and checks the associated rlQosPortPolicyStatisticsTable counters for matched/dropped packet counts; a policer statistics counter climbing rapidly alongside an active deny action would indicate a classifier is dropping more traffic than expected under the configured QoS policy.

What Can Be Monitored

ACL/ACE classification table entries
flow-classification offset and tuple tables
queue profile and DSCP-to-queue mapping
per-port policer rate-limit settings
port/policer/queue statistics counters

Imported Objects

From Dell-BRIDGEMIBOBJECTS-MIB

VlanList1
VlanList2
VlanList3
VlanList4

From Dell-MIB

Percents
rnd	MODULE-IDENTITY

From Dell-POLICY-MIB

StatisticsClearActionType
StatisticsDPType

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From Q-BRIDGE-MIB

PortList
VlanId

From SNMPv2-SMI

Counter32
Counter64
Gauge32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowPointer
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using rlQosAclCounterValue OID:

Select a Dell PowerConnect/Networking managed switch (CLI-style QoS ACEs/policers) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rlQosAclCounterValue into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of the ACE counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlQosCliMib	1.3.6.1.4.1.89.88			Added: StatisticsCntrNumOfBitsType StatisticsCntrType rlQosStatistics rlQosPortPolicyStatisticsTable rlQosSinglePolicerStatisticsTable rlQosAggregatePolicerStatisticsTable rlQosOutQueueStatisticsTable rlQosGlobalStatisticsCntrsTable.
QOS rlQosCliQosMode	1.3.6.1.4.1.89.88.1	QosGlobalMode	read-write	*******This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality************* This scalar define in which mode the system will work: basic , advance or none.
QOS rlQosCliBasicModeCfg	1.3.6.1.4.1.89.88.2	QosTrustMode	read-write	*******This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality************* This scalar define in which trust mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none or vpt-dscp.
INT rlQosMaxNumOfAce	1.3.6.1.4.1.89.88.3	INTEGER	read-only	This scalar define the max number of aces.
rlQosOffsetTable	1.3.6.1.4.1.89.88.4		not-accessible	This table specifies Offset Table information
rlQosOffsetEntry	1.3.6.1.4.1.89.88.4.1		not-accessible	Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex
INT rlQosOffsetIndex	1.3.6.1.4.1.89.88.4.1.1	INTEGER	not-accessible	An arbitrary incremental Index for the offset table.
CLA rlQosOffsetType	1.3.6.1.4.1.89.88.4.1.2	ClassOffsetType	read-create	Start of the offset.
INT rlQosOffsetValue	1.3.6.1.4.1.89.88.4.1.3	INTEGER	read-create	The Offset value.
INT rlQosOffsetMask	1.3.6.1.4.1.89.88.4.1.4	INTEGER	read-create	Define which bit to be extracted from the offset.
INT rlQosOffsetPattern	1.3.6.1.4.1.89.88.4.1.5	INTEGER	read-create	The value to match too.
INT rlQosOffsetTuplePointer	1.3.6.1.4.1.89.88.4.1.6	INTEGER	read-create	Pointer for the relevant Tuple.
ROW rlQosOffsetStatus	1.3.6.1.4.1.89.88.4.1.7	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosTupleTable	1.3.6.1.4.1.89.88.5		not-accessible	This table specifies Tuple Table information
rlQosTupleEntry	1.3.6.1.4.1.89.88.5.1		not-accessible	Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex
INT rlQosTupleIndex	1.3.6.1.4.1.89.88.5.1.1	INTEGER	not-accessible	An arbitrary incremental Index for the offset table.
CLA rlQosTupleType	1.3.6.1.4.1.89.88.5.1.2	ClassTupleType	read-create	Start of the offset.
INT rlQosTupleValue1	1.3.6.1.4.1.89.88.5.1.3	INTEGER	read-create	The Tuple no.1 value can be regular integer values only.
OCT rlQosTupleValue2	1.3.6.1.4.1.89.88.5.1.4	OCTET STRING	read-create	The Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask
ROW rlQosTupleStatus	1.3.6.1.4.1.89.88.5.1.5	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosAceTable	1.3.6.1.4.1.89.88.6		not-accessible	This table specifies ACE table information
rlQosAceEntry	1.3.6.1.4.1.89.88.6.1		not-accessible	Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex
INT rlQosAceIndex	1.3.6.1.4.1.89.88.6.1.1	INTEGER	not-accessible	An arbitrary incremental Index for the ACE table.
ACE rlQosAceAction	1.3.6.1.4.1.89.88.6.1.2	AceActionType	read-create	ACE Action to take.
ACE rlQosAceType	1.3.6.1.4.1.89.88.6.1.3	AceObjectType	read-create	ACE Type
INT rlQosAceTuple1	1.3.6.1.4.1.89.88.6.1.4	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple2	1.3.6.1.4.1.89.88.6.1.5	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple3	1.3.6.1.4.1.89.88.6.1.6	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple4	1.3.6.1.4.1.89.88.6.1.7	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple5	1.3.6.1.4.1.89.88.6.1.8	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple6	1.3.6.1.4.1.89.88.6.1.9	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple7	1.3.6.1.4.1.89.88.6.1.10	INTEGER	read-create	ACE Tuple 1 pointer.
INT rlQosAceTuple8	1.3.6.1.4.1.89.88.6.1.11	INTEGER	read-create	ACE Tuple 1 pointer.
BIN rlQosAceAccount	1.3.6.1.4.1.89.88.6.1.12	BinaryStatus	read-create	ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
ROW rlQosAceStatus	1.3.6.1.4.1.89.88.6.1.13	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosAclTable	1.3.6.1.4.1.89.88.7		not-accessible	This table specifies ACL table information
rlQosAclEntry	1.3.6.1.4.1.89.88.7.1		not-accessible	Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex
INT rlQosAclIndex	1.3.6.1.4.1.89.88.7.1.1	INTEGER	not-accessible	An arbitrary incremental Index for the ACE table.
STR rlQosAclName	1.3.6.1.4.1.89.88.7.1.2	DisplayString	read-create	Name ACL.
ACL rlQosAclType	1.3.6.1.4.1.89.88.7.1.3	AclObjectType	read-create	ACL Type.
ROW rlQosAclStatus	1.3.6.1.4.1.89.88.7.1.4	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
INT rlQosAclNumOfAces	1.3.6.1.4.1.89.88.7.1.5	INTEGER	read-only	Holds number of aces in the acl.
rlQosAclAceRefTable	1.3.6.1.4.1.89.88.8		not-accessible	This table specifies the ACE to ACL relationship.
rlQosAclAceRefEntry	1.3.6.1.4.1.89.88.8.1		not-accessible	Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer
INT rlQosAclAceRefAcePointer	1.3.6.1.4.1.89.88.8.1.1	INTEGER	not-accessible	The Index is the ACE pointer
INT rlQosAclAceRefAclPointer	1.3.6.1.4.1.89.88.8.1.2	INTEGER	read-create	ACL index Pointer
ROW rlQosAclAceRefStatus	1.3.6.1.4.1.89.88.8.1.3	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosClassMapTable	1.3.6.1.4.1.89.88.9		not-accessible	This table specifies CCL table information
rlQosClassMapEntry	1.3.6.1.4.1.89.88.9.1		not-accessible	Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex
INT rlQosClassMapIndex	1.3.6.1.4.1.89.88.9.1.1	INTEGER	not-accessible	Class Map Index
STR rlQosClassMapName	1.3.6.1.4.1.89.88.9.1.2	DisplayString	read-create	Name of the Class Map.
CLA rlQosClassMapType	1.3.6.1.4.1.89.88.9.1.3	ClassMapType	read-create	Class map type
CLA rlQosClassMapAction	1.3.6.1.4.1.89.88.9.1.4	ClassMapAction	read-create	Class Map Action.
INT rlQosClassMapMarkValue	1.3.6.1.4.1.89.88.9.1.5	INTEGER	read-create	Mark value when mark action has been chosen in Class Map Action field.
INT rlQosClassMapPolicer	1.3.6.1.4.1.89.88.9.1.6	INTEGER	read-create	Policer pointer. 0-means no policer.
INT rlQosClassMapMatch1	1.3.6.1.4.1.89.88.9.1.7	INTEGER	read-create	Match ACL 1 pointer.
INT rlQosClassMapMatch2	1.3.6.1.4.1.89.88.9.1.8	INTEGER	read-create	Match ACL 2 pointer.
MAR rlQosClassMapMarkVlan	1.3.6.1.4.1.89.88.9.1.9	MarkVlanAction	read-create	If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet.
INT rlQosClassMapNewVlan	1.3.6.1.4.1.89.88.9.1.10	INTEGER	read-create	If rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.
RED rlQosClassMapRedirectAction	1.3.6.1.4.1.89.88.9.1.11	RedirectAction	read-create	Specifiy the redirection action.
INT rlQosClassMapDestInterface	1.3.6.1.4.1.89.88.9.1.12	INTEGER	read-create	Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was forwarded.
ROW rlQosClassMapStatus	1.3.6.1.4.1.89.88.9.1.13	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
INT rlQosClassMapMatch3	1.3.6.1.4.1.89.88.9.1.14	INTEGER	read-create	Match ACL 3 pointer.
INT rlQosClassMapTrapId	1.3.6.1.4.1.89.88.9.1.15	INTEGER	read-create	If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.
T/F rlQosClassMapCounterEnable	1.3.6.1.4.1.89.88.9.1.16	TruthValue	read-create	Enable/disable counting per class map. Counts packets matche the class map rules.
U32 rlQosClassMapTunnelIdx	1.3.6.1.4.1.89.88.9.1.17	Unsigned32	read-create	If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet
rlQosPolicerTable	1.3.6.1.4.1.89.88.10		not-accessible	This table specifies All the Policers in the system Information
rlQosPolicerEntry	1.3.6.1.4.1.89.88.10.1		not-accessible	Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex
INT rlQosPolicerIndex	1.3.6.1.4.1.89.88.10.1.1	INTEGER	not-accessible	Policer Index.
STR rlQosPolicerName	1.3.6.1.4.1.89.88.10.1.2	DisplayString	read-create	Name of the Policer.
POL rlQosPolicerType	1.3.6.1.4.1.89.88.10.1.3	PolicerType	read-create	Policer type
U32 rlQosPolicerCir	1.3.6.1.4.1.89.88.10.1.4	Unsigned32	read-create	Committed rate value.
U32 rlQosPolicerCbs	1.3.6.1.4.1.89.88.10.1.5	Unsigned32	read-create	Committed rate Value.
POL rlQosPolicerAction	1.3.6.1.4.1.89.88.10.1.6	PolicerAction	read-create	Out of profile Action.
INT rlQosPolicerCasPointerRemVal	1.3.6.1.4.1.89.88.10.1.7	INTEGER	read-create	Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark
ROW rlQosPolicerStatus	1.3.6.1.4.1.89.88.10.1.8	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosPolicyMapTable	1.3.6.1.4.1.89.88.11		not-accessible	This table specifies Policy Map Table Information
rlQosPolicyMapEntry	1.3.6.1.4.1.89.88.11.1		not-accessible	Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex
INT rlQosPolicyMapIndex	1.3.6.1.4.1.89.88.11.1.1	INTEGER	not-accessible	Policy map Index.
STR rlQosPolicyMapName	1.3.6.1.4.1.89.88.11.1.2	DisplayString	read-create	Policy map Name.
ROW rlQosPolicyMapStatus	1.3.6.1.4.1.89.88.11.1.3	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosPolicyClassRefTable	1.3.6.1.4.1.89.88.12		not-accessible	This table specifies The relationship between policy map to class map
rlQosPolicyClassRefEntry	1.3.6.1.4.1.89.88.12.1		not-accessible	Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer
INT rlQosPolicyClassRefClassPointer	1.3.6.1.4.1.89.88.12.1.1	INTEGER	not-accessible	The Index is the Class-map pointer
INT rlQosPolicyClassRefPolicyPointer	1.3.6.1.4.1.89.88.12.1.2	INTEGER	read-create	Policy map index Pointer
ROW rlQosPolicyClassRefStatus	1.3.6.1.4.1.89.88.12.1.3	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosIfPolicyTable	1.3.6.1.4.1.89.88.13		not-accessible	This table specifies for each interface the Policy Map attach to it
rlQosIfPolicyEntry	1.3.6.1.4.1.89.88.13.1		not-accessible	Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType
INT rlIfIndex	1.3.6.1.4.1.89.88.13.1.1	INTEGER	not-accessible	Interface Index.
NUM rlIfType	1.3.6.1.4.1.89.88.13.1.2	InterfaceType	not-accessible	Interface Type(vlan/port).
INT rlQosIfPolicyMapPointerIn	1.3.6.1.4.1.89.88.13.1.3	INTEGER	read-create	Policy map pointer Input.
INT rlQosIfPolicyMapPointerOut	1.3.6.1.4.1.89.88.13.1.4	INTEGER	read-create	Policy map pointer Output.
BIN rlQosIfTrustActive	1.3.6.1.4.1.89.88.13.1.5	BinaryStatus	read-create	Interface Basic Mode Trust is active or not .
BIN rlQosPortShaperStatus	1.3.6.1.4.1.89.88.13.1.6	BinaryStatus	read-create	If there is shaper on the port
INT rlQosCirPortShaper	1.3.6.1.4.1.89.88.13.1.7	INTEGER	read-create	The CIR for the port shaper. N/A when the shper is disabled
INT rlQosCbsPortShaper	1.3.6.1.4.1.89.88.13.1.8	INTEGER	read-create	The CBS for the port shaper. N/A when the shper is disabled
STR rlQosIfProfilePointer	1.3.6.1.4.1.89.88.13.1.9	DisplayString	read-create	Interface Profile name pointer.
STR rlQosQueueProfilePointer	1.3.6.1.4.1.89.88.13.1.10	DisplayString	read-create	Queue Profile name pointer.
INT rlQosQueueShapeProfilePointer	1.3.6.1.4.1.89.88.13.1.11	INTEGER	read-create	Queue shape Profile pointer.
ACL rlQosAclDefaultAction	1.3.6.1.4.1.89.88.13.1.12	AclDefaultAction	read-create	When one ACL is enterd then what to do for the last rull.
ROW rlQosIfPolicyMapStatus	1.3.6.1.4.1.89.88.13.1.13	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
INT rlQosIfAclIn	1.3.6.1.4.1.89.88.13.1.14	INTEGER	read-create	Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
INT rlQosIfAclOut	1.3.6.1.4.1.89.88.13.1.15	INTEGER	read-create	Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
INT rlQosIfPolicerIn	1.3.6.1.4.1.89.88.13.1.16	INTEGER	read-create	Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.
BIN rlQosPortRateLimitStatus	1.3.6.1.4.1.89.88.13.1.17	BinaryStatus	read-create	If there is Rate limit on the port
INT rlQosCirPortRateLimit	1.3.6.1.4.1.89.88.13.1.18	INTEGER	read-create	The CIR for the port rate limit. N/A when the Rate limit is disabled
INT rlQosCbsPortRateLimit	1.3.6.1.4.1.89.88.13.1.19	INTEGER	read-create	The CBS for the port Rate limit. N/A when the Rate limit is disabled
INT rlQosIfIpv6AclIn	1.3.6.1.4.1.89.88.13.1.20	INTEGER	read-create	Index of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
INT rlQosIfIpv6AclOut	1.3.6.1.4.1.89.88.13.1.21	INTEGER	read-create	Index of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
rlQosIfProfileCfgTable	1.3.6.1.4.1.89.88.14		not-accessible	This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.
rlQosIfProfileCfgEntry	1.3.6.1.4.1.89.88.14.1		not-accessible	Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId
STR rlIfProfileName	1.3.6.1.4.1.89.88.14.1.1	DisplayString	not-accessible	Interface Index.
INT rlQosQueueId	1.3.6.1.4.1.89.88.14.1.2	INTEGER	not-accessible	Queue id Index.
INT rlQosTdThersholdDp0	1.3.6.1.4.1.89.88.14.1.3	INTEGER	read-create	Tail Drop Threshold for Drop Precedence 0.
INT rlQosTdThersholdDp1	1.3.6.1.4.1.89.88.14.1.4	INTEGER	read-create	Tail Drop Threshold for Drop Precedence 1.
INT rlQosTdThersholdDp2	1.3.6.1.4.1.89.88.14.1.5	INTEGER	read-create	Tail Drop Threshold for Drop Precedence 2.
INT rlQosRedMinDp0	1.3.6.1.4.1.89.88.14.1.6	INTEGER	read-create	WRED Min Threshold for Drop Precedence 2.
INT rlQosRedMaxDp0	1.3.6.1.4.1.89.88.14.1.7	INTEGER	read-create	WRED Max Threshold for Drop Precedence 0.
INT rlQosRedProbDp0	1.3.6.1.4.1.89.88.14.1.8	INTEGER	read-create	WRED probability for Drop Precedence 0.
INT rlQosRedMinDp1	1.3.6.1.4.1.89.88.14.1.9	INTEGER	read-create	WRED Min Threshold for Drop Precedence 2.
INT rlQosRedMaxDp1	1.3.6.1.4.1.89.88.14.1.10	INTEGER	read-create	WRED Max Threshold for Drop Precedence 1.
INT rlQosRedProbDp1	1.3.6.1.4.1.89.88.14.1.11	INTEGER	read-create	WRED probability for Drop Precedence 1.
INT rlQosRedMinDp2	1.3.6.1.4.1.89.88.14.1.12	INTEGER	read-create	WRED Min Threshold for Drop Precedence 2.
INT rlQosRedMaxDp2	1.3.6.1.4.1.89.88.14.1.13	INTEGER	read-create	WRED Max Threshold for Drop Precedence 2.
INT rlQosRedProbDp2	1.3.6.1.4.1.89.88.14.1.14	INTEGER	read-create	WRED probability for Drop Precedence 2.
INT rlQosRedQweight	1.3.6.1.4.1.89.88.14.1.15	INTEGER	read-create	Q factor for WRED.
ROW rlQosIfprofileStatus	1.3.6.1.4.1.89.88.14.1.16	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosDscpMutationTable	1.3.6.1.4.1.89.88.15		not-accessible	This table specifies The DSCP Mutation table
rlQosDscpMutationEntry	1.3.6.1.4.1.89.88.15.1		not-accessible	Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
INT rlQosOldDscp	1.3.6.1.4.1.89.88.15.1.1	INTEGER	not-accessible	Old DSCP.
INT rlQosNewDscp	1.3.6.1.4.1.89.88.15.1.2	INTEGER	read-create	New DSCP.
rlQosDscpRemarkTable	1.3.6.1.4.1.89.88.16		not-accessible	This table specifies The DSCP Remark table
rlQosDscpRemarkEntry	1.3.6.1.4.1.89.88.16.1		not-accessible	Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
INT rlQosRmOldDscp	1.3.6.1.4.1.89.88.16.1.1	INTEGER	not-accessible	Old DSCP.
INT rlQosRmNewDscp	1.3.6.1.4.1.89.88.16.1.2	INTEGER	read-create	New DSCP.
rlQosCosQueueTable	1.3.6.1.4.1.89.88.17		not-accessible	This table specifies The Cos to queue map table
rlQosCosQueueEntry	1.3.6.1.4.1.89.88.17.1		not-accessible	Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex
INT rlQosCosIndex	1.3.6.1.4.1.89.88.17.1.1	INTEGER	not-accessible	CoS value (0-7).
INT rlQosCosQueueId	1.3.6.1.4.1.89.88.17.1.2	INTEGER	read-create	Queue ID.
rlQosDscpQueueTable	1.3.6.1.4.1.89.88.18		not-accessible	This table specifies The DSCP to Queue map table
rlQosDscpQueueEntry	1.3.6.1.4.1.89.88.18.1		not-accessible	Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex
INT rlQosDscpIndex	1.3.6.1.4.1.89.88.18.1.1	INTEGER	not-accessible	DSCP value.
INT rlQosQueueNum	1.3.6.1.4.1.89.88.18.1.2	INTEGER	read-create	Queue Number.
rlQosTcpPortQueueTable	1.3.6.1.4.1.89.88.19		not-accessible	This table specifies TCP Port to Queue map table
rlQosTcpPortQueueEntry	1.3.6.1.4.1.89.88.19.1		not-accessible	Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort
INT rlQosTcpPort	1.3.6.1.4.1.89.88.19.1.1	INTEGER	not-accessible	TCP port number.
INT rlQosTcpQueueValue	1.3.6.1.4.1.89.88.19.1.2	INTEGER	read-create	Queue Number.
ROW rlQosTcpPortQueueStatus	1.3.6.1.4.1.89.88.19.1.3	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosUdpPortQueueTable	1.3.6.1.4.1.89.88.20		not-accessible	This table specifies UDP Port to Queue map table
rlQosUdpPortQueueEntry	1.3.6.1.4.1.89.88.20.1		not-accessible	Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort
INT rlQosUdpPort	1.3.6.1.4.1.89.88.20.1.1	INTEGER	not-accessible	UDP port number.
INT rlQosUdpQueueValue	1.3.6.1.4.1.89.88.20.1.2	INTEGER	read-create	Queue value.
ROW rlQosUdpPortQueueStatus	1.3.6.1.4.1.89.88.20.1.3	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosEfManageTable	1.3.6.1.4.1.89.88.21		not-accessible	This table specifies UDP Port to DSCP map table
rlQosEfManageEntry	1.3.6.1.4.1.89.88.21.1		not-accessible	This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId
INT rlQosEfQueueId	1.3.6.1.4.1.89.88.21.1.1	INTEGER	not-accessible	Queue-ID.
BIN rlQosEfState	1.3.6.1.4.1.89.88.21.1.2	BinaryStatus	read-create	Enable/disable
INT rlQosEfPriority	1.3.6.1.4.1.89.88.21.1.3	INTEGER	read-create	The priority of the queue
rlQosQueueProfileTable	1.3.6.1.4.1.89.88.22		not-accessible	This table describes the queue managment profiles
rlQosQueueProfileEntry	1.3.6.1.4.1.89.88.22.1		not-accessible	Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName
STR rlQueueProfileName	1.3.6.1.4.1.89.88.22.1.1	DisplayString	not-accessible	Profile name for the Queue profile.
QUE rlQosTypeQueue1	1.3.6.1.4.1.89.88.22.1.2	QueueType	read-create	EF or WRR
INT rlQosValueQueue1	1.3.6.1.4.1.89.88.22.1.3	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue2	1.3.6.1.4.1.89.88.22.1.4	QueueType	read-create	EF or WRR
INT rlQosValueQueue2	1.3.6.1.4.1.89.88.22.1.5	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue3	1.3.6.1.4.1.89.88.22.1.6	QueueType	read-create	EF or WRR
INT rlQosValueQueue3	1.3.6.1.4.1.89.88.22.1.7	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue4	1.3.6.1.4.1.89.88.22.1.8	QueueType	read-create	EF or WRR
INT rlQosValueQueue4	1.3.6.1.4.1.89.88.22.1.9	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue5	1.3.6.1.4.1.89.88.22.1.10	QueueType	read-create	EF or WRR
INT rlQosValueQueue5	1.3.6.1.4.1.89.88.22.1.11	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue6	1.3.6.1.4.1.89.88.22.1.12	QueueType	read-create	EF or WRR
INT rlQosValueQueue6	1.3.6.1.4.1.89.88.22.1.13	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue7	1.3.6.1.4.1.89.88.22.1.14	QueueType	read-create	EF or WRR
INT rlQosValueQueue7	1.3.6.1.4.1.89.88.22.1.15	INTEGER	read-create	for EF read-only for wrr the weight
QUE rlQosTypeQueue8	1.3.6.1.4.1.89.88.22.1.16	QueueType	read-create	EF or WRR
INT rlQosValueQueue8	1.3.6.1.4.1.89.88.22.1.17	INTEGER	read-create	for EF read-only for wrr the weight
ROW rlQosQueueProfileStatus	1.3.6.1.4.1.89.88.22.1.18	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
INT rlQosNumOfIfConnections	1.3.6.1.4.1.89.88.22.1.19	INTEGER	read-only	how many time this entry connected to the if policy table
rlQosQueueShapeProfileTable	1.3.6.1.4.1.89.88.23		not-accessible	This table specifies the queue shaper profile
rlQosQueueShapeProfileEntry	1.3.6.1.4.1.89.88.23.1		not-accessible	Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex
INT rlQosQueueShapeIndex	1.3.6.1.4.1.89.88.23.1.1	INTEGER	not-accessible	Profile Index.
INT rlQosCirQueue1	1.3.6.1.4.1.89.88.23.1.2	INTEGER	read-create	CIR for Queue1 0 for not active
INT rlQosCbsQueue1	1.3.6.1.4.1.89.88.23.1.3	INTEGER	read-create	CBS for Queue1 0 for not active
INT rlQosCirQueue2	1.3.6.1.4.1.89.88.23.1.4	INTEGER	read-create	CIR for Queue2 0 for not active
INT rlQosCbsQueue2	1.3.6.1.4.1.89.88.23.1.5	INTEGER	read-create	CBS for Queue2 0 for not active
INT rlQosCirQueue3	1.3.6.1.4.1.89.88.23.1.6	INTEGER	read-create	CIR for Queue3 0 for not active
INT rlQosCbsQueue3	1.3.6.1.4.1.89.88.23.1.7	INTEGER	read-create	CBS for Queue3 0 for not active
INT rlQosCirQueue4	1.3.6.1.4.1.89.88.23.1.8	INTEGER	read-create	CIR for Queue4 0 for not active
INT rlQosCbsQueue4	1.3.6.1.4.1.89.88.23.1.9	INTEGER	read-create	CBS for Queue4 0 for not active
INT rlQosCirQueue5	1.3.6.1.4.1.89.88.23.1.10	INTEGER	read-create	CIR for Queue5 0 for not active
INT rlQosCbsQueue5	1.3.6.1.4.1.89.88.23.1.11	INTEGER	read-create	CBS for Queue5 0 for not active
INT rlQosCirQueue6	1.3.6.1.4.1.89.88.23.1.12	INTEGER	read-create	CIR for Queue6 0 for not active
INT rlQosCbsQueue6	1.3.6.1.4.1.89.88.23.1.13	INTEGER	read-create	CBS for Queue6 0 for not active
INT rlQosCirQueue7	1.3.6.1.4.1.89.88.23.1.14	INTEGER	read-create	CIR for Queue7 0 for not active
INT rlQosCbsQueue7	1.3.6.1.4.1.89.88.23.1.15	INTEGER	read-create	CBS for Queue7 0 for not active
INT rlQosCirQueue8	1.3.6.1.4.1.89.88.23.1.16	INTEGER	read-create	CIR for Queue8 0 for not active
INT rlQosCbsQueue8	1.3.6.1.4.1.89.88.23.1.17	INTEGER	read-create	CBS for Queue8 0 for not active
ROW rlQosQueueShapeProfileStatus	1.3.6.1.4.1.89.88.23.1.18	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosAclCounterTable	1.3.6.1.4.1.89.88.24		not-accessible	The table is used to show statistics for ACL applied on an interface.
rlQosAclCounterEntry	1.3.6.1.4.1.89.88.24.1		not-accessible	This entry shows value of conter for a particular ACE of an ACL.
NUM rlQosAclCounterInterface	1.3.6.1.4.1.89.88.24.1.1	InterfaceIndex	read-only	Interface Index on which ACL is applied.
INT rlQosAclCounterAclIndex	1.3.6.1.4.1.89.88.24.1.2	INTEGER	read-only	Index of ACL, which was applied on the IfIndex.
INT rlQosAclCounterAceIndex	1.3.6.1.4.1.89.88.24.1.3	INTEGER	read-only	Index of ACE, which is belong to an ACL.
C32 rlQosAclCounterValueEx	1.3.6.1.4.1.89.88.24.1.4	Counter32	read-only	The value of the ACE counter.
rlQosFreeIndexesTable	1.3.6.1.4.1.89.88.25		not-accessible	The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases.
rlQosFreeIndexesEntry	1.3.6.1.4.1.89.88.25.1		not-accessible	The entry is used to get free index for particular table.
INT rlQosFreeIndexesTableId	1.3.6.1.4.1.89.88.25.1.1	INTEGER	read-only	Identification of the table, for which free index is retrieved.
INT rlQosFreeIndexesValue	1.3.6.1.4.1.89.88.25.1.2	INTEGER	read-only	Free index for table. 0 means no free entries.
rlQosNamesToIndexesTable	1.3.6.1.4.1.89.88.26		not-accessible	The table is used to get the ACL,Class-Map and Policy-Map indexes from the name.
rlQosNamesToIndexesEntry	1.3.6.1.4.1.89.88.26.1		not-accessible	The entry is used to get index form particular name and table type.
INT rlQosNamesToIndexesTableId	1.3.6.1.4.1.89.88.26.1.1	INTEGER	not-accessible	Identification of the table, for which the index is retrieved.
STR rlQosNamesToIndexesName	1.3.6.1.4.1.89.88.26.1.2	DisplayString	not-accessible	The name of the entry
INT rlQosNamesToIndexesValue	1.3.6.1.4.1.89.88.26.1.3	INTEGER	read-only	the index for table
INT rlQosStackControlQueue	1.3.6.1.4.1.89.88.27	INTEGER	read-only	This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue.
INT rlQosStackControlCos	1.3.6.1.4.1.89.88.28	INTEGER	read-only	This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue.
rlQosCosQueueDefaultMapTable	1.3.6.1.4.1.89.88.29		not-accessible	The table is used to set default 802.1p map (vpt to queue)
rlQosCosQueueDefaultMapEntry	1.3.6.1.4.1.89.88.29.1		not-accessible	The entry is used to get index form particular name and table type.
INT rlQosCosQueueDefaultMapVpt	1.3.6.1.4.1.89.88.29.1.1	INTEGER	read-only	vlan priority tag , 3 bits of priority which determine the service class.
INT rlQosCosQueueDefaultMapQueueId	1.3.6.1.4.1.89.88.29.1.2	INTEGER	read-only	the queue id vary from the first queue id to Max Number of queues supported
rlQosPredefBlockAclTable	1.3.6.1.4.1.89.88.30		not-accessible	The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs.
rlQosPredefBlockAclEntry	1.3.6.1.4.1.89.88.30.1		not-accessible	The entry is used to apply predefined ACLs to the interface.
NUM rlQosPredefBlockAclIfIndex	1.3.6.1.4.1.89.88.30.1.1	InterfaceIndex	not-accessible	IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.
NUM rlQosPredefBlockAclIfType	1.3.6.1.4.1.89.88.30.1.2	InterfaceType	not-accessible	Interface Type(vlan/port).
OCT rlQosPredefBlockAclMask	1.3.6.1.4.1.89.88.30.1.3	OCTET STRING	read-create	This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames
ROW rlQosPredefBlockAclStatus	1.3.6.1.4.1.89.88.30.1.4	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosAceTidxTable	1.3.6.1.4.1.89.88.31		not-accessible	This table specifies ACE table with two index information
rlQosAceTidxEntry	1.3.6.1.4.1.89.88.31.1		not-accessible	Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index
INT rlQosAceTidxAclIndex	1.3.6.1.4.1.89.88.31.1.1	INTEGER	not-accessible	An arbitrary incremental Index for the ACL ACE connection.
INT rlQosAceTidxIndex	1.3.6.1.4.1.89.88.31.1.2	INTEGER	not-accessible	An arbitrary incremental Index for the ACE table.
ACE rlQosAceTidxAction	1.3.6.1.4.1.89.88.31.1.3	AceActionType	read-create	ACE Action to take.
ACE rlQosAceTidxType	1.3.6.1.4.1.89.88.31.1.4	AceObjectType	read-create	ACE Type
INT rlQosAceTidxTuple1	1.3.6.1.4.1.89.88.31.1.5	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple2	1.3.6.1.4.1.89.88.31.1.6	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple3	1.3.6.1.4.1.89.88.31.1.7	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple4	1.3.6.1.4.1.89.88.31.1.8	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple5	1.3.6.1.4.1.89.88.31.1.9	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple6	1.3.6.1.4.1.89.88.31.1.10	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple7	1.3.6.1.4.1.89.88.31.1.11	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple8	1.3.6.1.4.1.89.88.31.1.12	INTEGER	read-create	ACE Tuple pointer.
BIN rlQosAceTidxAccount	1.3.6.1.4.1.89.88.31.1.13	BinaryStatus	read-create	ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
ROW rlQosAceTidxStatus	1.3.6.1.4.1.89.88.31.1.14	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
STR rlQosAceTidxTimeRange	1.3.6.1.4.1.89.88.31.1.15	DisplayString	read-create	ACE time range name.
T/F rlQosAceTidxTimeRangeIsActive	1.3.6.1.4.1.89.88.31.1.16	TruthValue	read-only	ACE time range is rule active state shows is ACE currently active or not.
INT rlQosAceTidxTuple9	1.3.6.1.4.1.89.88.31.1.17	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple10	1.3.6.1.4.1.89.88.31.1.18	INTEGER	read-create	ACE Tuple pointer.
INT rlQosAceTidxTuple11	1.3.6.1.4.1.89.88.31.1.19	INTEGER	read-create	ACE Tuple pointer.
RLQ rlQosAceTidxActionDropType	1.3.6.1.4.1.89.88.31.1.20	RlQosAceTidxActionDropType	read-create	This field is valid only if AceActionType is deny or deny-DisablePort.
INT rlQosMibVersion	1.3.6.1.4.1.89.88.32	INTEGER	read-only	MIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable 9 - Add statistics 10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType 11 - Added rlQosCPUSafeGuardEnable
rlQosDscpQueueDefaultMapTable	1.3.6.1.4.1.89.88.33		not-accessible	The table is used to set default dscp to queue map
rlQosDscpQueueDefaultMapEntry	1.3.6.1.4.1.89.88.33.1		not-accessible	The entry is used to get index form particular name and table type.
INT rlQosDscpQueueDefaultMapDscp	1.3.6.1.4.1.89.88.33.1.1	INTEGER	read-only	dscp , 6 bits of priority which determine the service class.
INT rlQosDscpQueueDefaultMapQueueId	1.3.6.1.4.1.89.88.33.1.2	INTEGER	read-only	the queue id vary from the first queue id to Max Number of queues supported
rlQosDscpToDpTable	1.3.6.1.4.1.89.88.34		not-accessible	This table specifies The DSCP To Dp table
rlQosDscpToDpEntry	1.3.6.1.4.1.89.88.34.1		not-accessible	Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp
INT rlQosDscp	1.3.6.1.4.1.89.88.34.1.1	INTEGER	not-accessible	Packet DSCP.
INT rlQosDp	1.3.6.1.4.1.89.88.34.1.2	INTEGER	read-create	New DP.
rlQosStatistics	1.3.6.1.4.1.89.88.35
rlQosPortPolicyStatisticsTable	1.3.6.1.4.1.89.88.35.1		not-accessible	This table specifies statistics counter for policies with specific actions
rlQosPortPolicyStatisticsEntry	1.3.6.1.4.1.89.88.35.1.1		not-accessible	Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled.
STA rlQosPortPolicyStatisticsCntrType	1.3.6.1.4.1.89.88.35.1.1.1	StatisticsCntrType	read-write	Counter type.
STA rlQosPortPolicyStatisticsCntrNumOfBits	1.3.6.1.4.1.89.88.35.1.1.2	StatisticsCntrNumOfBitsType	read-only	Counter size in bits.
T/F rlQosPortPolicyStatisticsEnableCounting	1.3.6.1.4.1.89.88.35.1.1.3	TruthValue	read-write	Indication whether the counter is enabled.
C64 rlQosPortPolicyStatisticsCounterValue	1.3.6.1.4.1.89.88.35.1.1.4	Counter64	read-only	Counter value.
rlQosSinglePolicerStatisticsTable	1.3.6.1.4.1.89.88.35.2		not-accessible	This table specifies statistics counters per QoS meter
rlQosSinglePolicerStatisticsEntry	1.3.6.1.4.1.89.88.35.2.1		not-accessible	Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes.
C64 rlQosSinglePolicerStatisticsInProfileCounterValue	1.3.6.1.4.1.89.88.35.2.1.1	Counter64	read-only	Counter value of in profile traffic.
STA rlQosSinglePolicerStatisticsInProfileCntrNumOfBits	1.3.6.1.4.1.89.88.35.2.1.2	StatisticsCntrNumOfBitsType	read-only	Counter size in bits for in profile counter.
C64 rlQosSinglePolicerStatisticsOutProfileCounterValue	1.3.6.1.4.1.89.88.35.2.1.3	Counter64	read-only	Counter value of Out Profile traffic.
STA rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits	1.3.6.1.4.1.89.88.35.2.1.4	StatisticsCntrNumOfBitsType	read-only	Counter size in bits for out profile counter.
ROW rlQosSinglePolicerStatisticsStatus	1.3.6.1.4.1.89.88.35.2.1.5	RowStatus	read-write	The status of a table entry. It is used to delete an entry from this table.
rlQosAggregatePolicerStatisticsTable	1.3.6.1.4.1.89.88.35.3		not-accessible	This table specifies statistics counters per QoS aggregate meter
rlQosAggregatePolicerStatisticsEntry	1.3.6.1.4.1.89.88.35.3.1		not-accessible	Each entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter for the meter is enabled and three counters values - for green, yellow and red profiles bytes.
C64 rlQosAggregatePolicerStatisticsInProfileCounterValue	1.3.6.1.4.1.89.88.35.3.1.1	Counter64	read-only	Counter value of In Profile amount of bytes.
STA rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits	1.3.6.1.4.1.89.88.35.3.1.2	StatisticsCntrNumOfBitsType	read-only	Counter size in bits for In Profile .
C64 rlQosAggregatePolicerStatisticsOutProfileCounterValue	1.3.6.1.4.1.89.88.35.3.1.3	Counter64	read-only	Counter value of Out Profile amount of bytes.
STA rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits	1.3.6.1.4.1.89.88.35.3.1.4	StatisticsCntrNumOfBitsType	read-only	Counter size in bits for Out Profile.
ROW rlQosAggregatePolicerStatisticsStatus	1.3.6.1.4.1.89.88.35.3.1.5	RowStatus	read-write	The status of a table entry. It is used to delete an entry from this table.
rlQosOutQueueStatisticsTable	1.3.6.1.4.1.89.88.35.4		not-accessible	This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence
rlQosOutQueueStatisticsEntry	1.3.6.1.4.1.89.88.35.4.1		not-accessible	Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port represent by rlQosOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value.
INT rlQosOutQueueStatisticsCountrID	1.3.6.1.4.1.89.88.35.4.1.1	INTEGER	read-write	Counter id, the key of the table.
POR rlQosOutQueueStatisticsIfIndexList	1.3.6.1.4.1.89.88.35.4.1.2	PortList	read-write	Port for which the flow is counted.
T/F rlQosOutQueueStatisticsPortAll	1.3.6.1.4.1.89.88.35.4.1.3	TruthValue	read-write	Indication for whether the port is configured as range of all the ports
INT rlQosOutQueueStatisticsVlan	1.3.6.1.4.1.89.88.35.4.1.4	INTEGER	read-write	VLAN for which the flow is counted.
T/F rlQosOutQueueStatisticsVlanAll	1.3.6.1.4.1.89.88.35.4.1.5	TruthValue	read-write	Indication for whether the VLAN is configured as range of all the VLANS
INT rlQosOutQueueStatisticsQueue	1.3.6.1.4.1.89.88.35.4.1.6	INTEGER	read-write	Queue for which the flow is counted.
T/F rlQosOutQueueStatisticsQueueAll	1.3.6.1.4.1.89.88.35.4.1.7	TruthValue	read-write	Indication for whether the queue is configured as range of all the Queues
STA rlQosOutQueueStatisticsDP	1.3.6.1.4.1.89.88.35.4.1.8	StatisticsDPType	read-write	Drop Precedence for which the flow is counted.
T/F rlQosOutQueueStatisticsDPAll	1.3.6.1.4.1.89.88.35.4.1.9	TruthValue	read-write	Indication for whether the DP is configured as range of all the DPs
C64 rlQosOutQueueStatisticsCounterTailDropValue	1.3.6.1.4.1.89.88.35.4.1.10	Counter64	read-only	The counter for tail dropped value.
C64 rlQosOutQueueStatisticsCounterAllValue	1.3.6.1.4.1.89.88.35.4.1.11	Counter64	read-only	The counter for all traffic value.
STA rlQosOutQueueStatisticsCntrNumOfBits	1.3.6.1.4.1.89.88.35.4.1.12	StatisticsCntrNumOfBitsType	read-only	Counter size in bits for the counter.
ROW rlQosOutQueueStatisticsStatus	1.3.6.1.4.1.89.88.35.4.1.13	RowStatus	read-write	The status of a table entry. It is used to delete an entry from this table.
rlQosGlobalStatisticsCntrsTable	1.3.6.1.4.1.89.88.35.5		not-accessible	This table specifies statistics global counters for specific rules for all ports that they are connected to
rlQosGlobalStatisticsCntrsEntry	1.3.6.1.4.1.89.88.35.5.1		not-accessible	Each entry represents global counter.
STA rlQosGlobalStatisticsCntrsType	1.3.6.1.4.1.89.88.35.5.1.1	StatisticsCntrType	read-only	Counter type.
STA rlQosGlobalStatisticsCntrsNumOfBits	1.3.6.1.4.1.89.88.35.5.1.2	StatisticsCntrNumOfBitsType	read-only	Counter size in bits.
C64 rlQosGlobalStatisticsCntrsCounterValue	1.3.6.1.4.1.89.88.35.5.1.3	Counter64	read-only	Counter value.
ROW rlQosGlobalStatisticsStatus	1.3.6.1.4.1.89.88.35.5.1.4	RowStatus	read-write	The status of a table entry. It is used to delete an entry from this table.
INT rlQosClearCounters	1.3.6.1.4.1.89.88.35.6	INTEGER	read-write	This scalar indicates to clear all the counters.
rlQosClassifierUtilization	1.3.6.1.4.1.89.88.36
rlQosClassifierUtilizationTable	1.3.6.1.4.1.89.88.36.1		not-accessible	A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.
rlQosClassifierUtilizationEntry	1.3.6.1.4.1.89.88.36.1.1		not-accessible	A Single entry containing Classifier utilization information.
U32 rlQosClassifierUtilizationUnitId	1.3.6.1.4.1.89.88.36.1.1.1	Unsigned32	not-accessible	The Unit ID of this Classifier. must be unique per entry. This is an index into the table.
U32 rlQosClassifierUtilizationPercent	1.3.6.1.4.1.89.88.36.1.1.2	Unsigned32	read-only	The classifier utilization percentage.
U32 rlQosClassifierUtilizationRulesNumber	1.3.6.1.4.1.89.88.36.1.1.3	Unsigned32	read-only	The classifier utilization number of used rules, in short rules resolution.
U32 rlQosClassifierUtilizationFreeRulesNumber	1.3.6.1.4.1.89.88.36.1.1.4	Unsigned32	read-only	The classifier utilization number of not used yet rules on the unit, in short rules resolution.
U32 rlQosClassifierUtilizationSystem	1.3.6.1.4.1.89.88.36.2	Unsigned32	read-only	The system classifier utilization percentage.
U32 rlQosClassifierRulesNumberUtilizationSystem	1.3.6.1.4.1.89.88.36.3	Unsigned32	read-only	Number of used rules per system, in short rule resolution
U32 rlQosClassifierFreeRulesNumUtilizationSystem	1.3.6.1.4.1.89.88.36.4	Unsigned32	read-only	Number of free rules per system, in short rule resolution
U32 rlQosClassifierMaxRulesNumberUtilizationSystem	1.3.6.1.4.1.89.88.36.5	Unsigned32	read-only	Maximum number of rules per system, in short rule resolution
rlQosPortToProfileMappingTable	1.3.6.1.4.1.89.88.37		not-accessible	This table maps between port and profile
rlQosPortToProfileMappingEntry	1.3.6.1.4.1.89.88.37.1		not-accessible	Each entry in this table describes mapping between port and profile
INT rlQosPort	1.3.6.1.4.1.89.88.37.1.1	INTEGER	not-accessible	Port number
STR rlQosProfileName	1.3.6.1.4.1.89.88.37.1.2	DisplayString	read-only	profile
INT rlQosCPUSafeGuardEnable	1.3.6.1.4.1.89.88.38	INTEGER	read-write	This scalar enables/disables CPU Safeguard.
rlQosPolicyClassPriorityRefTable	1.3.6.1.4.1.89.88.39		not-accessible	This table specifies The relationship between policy map to class map
rlQosPolicyClassPriorityRefEntry	1.3.6.1.4.1.89.88.39.1		not-accessible	Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer. It is also specifies the class-map priotiry in the policy-map, which set the rules order within the policy-map
INT rlQosPolicyClassPriorityRefPriority	1.3.6.1.4.1.89.88.39.1.1	INTEGER	not-accessible	The class-map priority within the policy-map
INT rlQosPolicyClassPriorityRefClassPointer	1.3.6.1.4.1.89.88.39.1.2	INTEGER	read-create	Class-map index Pointer
INT rlQosPolicyClassPriorityRefPolicyPointer	1.3.6.1.4.1.89.88.39.1.3	INTEGER	read-create	Policy map index Pointer
ROW rlQosPolicyClassPriorityRefStatus	1.3.6.1.4.1.89.88.39.1.4	RowStatus	read-create	The status of a table entry. It is used to delete/Add an entry from this table.
rlQosDenyAceStatisticsTable	1.3.6.1.4.1.89.88.42		not-accessible	This table holds statistics for deny ACEs.
rlQosDenyAceStatisticsEntry	1.3.6.1.4.1.89.88.42.1		not-accessible	Each entry in this table holds number of hits for deny ACEs attached to specific Interface.
INT rlQosDenyAceStatisticsIfIndex	1.3.6.1.4.1.89.88.42.1.1	INTEGER	not-accessible	Interface Index.
INT rlQosDenyAceStatisticsIfCounter	1.3.6.1.4.1.89.88.42.1.2	INTEGER	read-only	Number of hits on deny ACEs for this interface.
INT rlQosDenyAceStatisticsOtherFlowCounter	1.3.6.1.4.1.89.88.43	INTEGER	read-only	Number of hits on deny ACEs for 'Other'-type flow.
NUM rlQosDenyAceStatisticsClearIfCounters	1.3.6.1.4.1.89.88.44	InterfaceIndexOrZero	read-write	Keeps ifIndex a port or trunk or vlan that its hit counters should be reset. If the value is 0 then all interfaces counters must be reset.
INT rlQosDenyAceStatisticsClearOtherFlowCounter	1.3.6.1.4.1.89.88.45	INTEGER	read-write	This scalar indicates clearing 'Other'-type flow counter operation.
rlQosModeGlobalCfgTable	1.3.6.1.4.1.89.88.46		not-accessible	This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.
rlQosModeGlobalCfgEntry	1.3.6.1.4.1.89.88.46.1		not-accessible	This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist.
INT rlQosGlobalIndex	1.3.6.1.4.1.89.88.46.1.1	INTEGER	not-accessible	Entry index - currenly only one entry can exist, indexes hard coded with value '1'.
QOS rlQosGlobalQoSMode	1.3.6.1.4.1.89.88.46.1.2	QosGlobalMode	read-write	This field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.
QOS rlQosBasicGlobalTrustMode	1.3.6.1.4.1.89.88.46.1.3	QosTrustMode	read-write	This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode.
QOS rlQosAdvcGlobalTrustMode	1.3.6.1.4.1.89.88.46.1.4	QosTrustMode	read-write	This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode.
T/F rlQoSPortTrustAdvancedMode	1.3.6.1.4.1.89.88.46.1.5	TruthValue	read-write	This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.
T/F rlQosDscpMutationEnable	1.3.6.1.4.1.89.88.46.1.6	TruthValue	read-write	This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true.
ROW rlQosModeGlobalCfgStatus	1.3.6.1.4.1.89.88.46.1.7	RowStatus	read-write	This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.
rlQosClassMapCounterTable	1.3.6.1.4.1.89.88.47		not-accessible	The table is used to show statistics for ACL applied on an interface.
rlQosClassMapCounterEntry	1.3.6.1.4.1.89.88.47.1		not-accessible	This entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is set to zero upon reading its value.
C64 rlQosClassMapCounterValue	1.3.6.1.4.1.89.88.47.1.2	Counter64	read-only	This field returns the current value of the class map counter.
rlQosApplicationTrapIdTable	1.3.6.1.4.1.89.88.48		not-accessible	The read only table is used to get the trapId assisated to application wants to use the trap action in the class map table
rlQosApplicationTrapIdEntry	1.3.6.1.4.1.89.88.48.1		not-accessible	This entry holds the trapId for application using the trap action in the class map table.
STR rlQosApplicationName	1.3.6.1.4.1.89.88.48.1.1	DisplayString	not-accessible	This field represents the application name and traffic type.
INT rlQosApplicationTrapId	1.3.6.1.4.1.89.88.48.1.2	INTEGER	read-only	This field defines the trap id to be use in the class map entry.
RLQ rlQoSApplicationDefaultAction	1.3.6.1.4.1.89.88.49	RlQosApplicationDefaultActionType	read-write	This scalar specifies application-specific default action
rlQosLogInputInterfacesAceMatchedTable	1.3.6.1.4.1.89.88.50		not-accessible	This table holds a list and of ACE matched log-input option interfaces.
rlQosLogInputInterfacesAceMatchedEntry	1.3.6.1.4.1.89.88.50.1		not-accessible	This table holds only one entry of port list and vlan list.
INT rlQosLogInputInterfacesAceMatchedIndex	1.3.6.1.4.1.89.88.50.1.1	INTEGER	not-accessible	An index is entrie's sequence.
POR rlQosLogInputInterfacesAceMatchedPorts	1.3.6.1.4.1.89.88.50.1.2	PortList	read-only	the matched log-input ACEs port list
VLA rlQosLogInputInterfacesAceMatchedVlanList1to1024	1.3.6.1.4.1.89.88.50.1.3	VlanList1	read-only	the matched log-input ACEs vlan list from 1 to 1024.
VLA rlQosLogInputInterfacesAceMatchedVlanList1025to2048	1.3.6.1.4.1.89.88.50.1.4	VlanList2	read-only	the matched log-input ACEs vlan list from 1025 to 2048.
VLA rlQosLogInputInterfacesAceMatchedVlanList2049to3072	1.3.6.1.4.1.89.88.50.1.5	VlanList3	read-only	the matched log-input ACEs vlan list from 2049 to 3072.
VLA rlQosLogInputInterfacesAceMatchedVlanList3073to4094	1.3.6.1.4.1.89.88.50.1.6	VlanList4	read-only	the matched log-input ACEs vlan list from 3073 to 4094.

RFC description

Configures quality of service policies, access control lists, and traffic rate limiting on Dell switches.

Start monitoring Dell PowerConnect/Networking managed switch (CLI-style QoS ACEs/policers) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-QOS-CLI-MIB