All MIBs › DOCS-QOS3-MIB › docsQosParamSetRequestPolicyOct
docsQosParamSetRequestPolicyOct
Module: DOCS-QOS3-MIB
OID (symbolic): DOCS-QOS3-MIB::docsQosParamSetRequestPolicyOct
OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.2.1.24
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This attribute specifies which transmit interval opportunities the CM omits for upstream transmission requests and packet transmissions. This object takes its default value for downstream Service Flows. Unless otherwise indicated, a bit value of 1 means that a CM must not use that opportunity for upstream transmission.
The format of this string enumerated the bits from 0 to 31 from left to right, for example bit 0 corresponds to the left most bit of the fourth octet. (octets numbered from right to left). The bit positions are defined as follows: 'broadcastReqOpp' all CMs broadcast request opportunities 'priorityReqMulticastReq' priority request multicast request opportunities 'reqDataForReq' request/data opportunities for requests 'reqDataForData' request/data opportunities for data 'piggybackReqWithData' piggyback requests with data 'concatenateData' concatenate data 'fragmentData' fragment data 'suppressPayloadHeaders' suppress payload headers 'dropPktsExceedUGSize' A value of 1 means that the service flow must drop packets that do not fit in the Unsolicited Grant size.
If the referenced parameter is not present in a QOS Parameter Set, the value of this object is reported as '00000000'H.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.24 snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetRequestPolicyOct
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.24.1 snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetRequestPolicyOct.1
Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosParamSetRequestPolicyOct OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.21 | docsQos3Mib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21.1 | docsQosMibObjects | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2 | docsQosParamSetTable | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1 | docsQosParamSetEntry | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.24 | docsQosParamSetRequestPolicyOct | DOCS-QOS3-MIB |