All MIBs › DOCS-QOS3-MIB › docsQosParamSetPriority
docsQosParamSetPriority
Module: DOCS-QOS3-MIB
OID (symbolic): DOCS-QOS3-MIB::docsQosParamSetPriority
OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.2.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute represents the relative priority of a Service Flow. Higher numbers indicate higher priority.
This priority should only be used to differentiate Service Flow from identical parameter sets. This attribute returns 0 if the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set or if the parameter is not applicable.
What is docsQosParamSetPriority?
This object represents the relative priority assigned to a specific DOCSIS Quality of Service parameter set, with higher numeric values indicating higher priority levels. It is used by cable modem (CM) and cable modem termination system (CMTS) devices to differentiate between Service Flows that have identical QoS parameter configurations. An operator would check this value when troubleshooting QoS behavior to ensure traffic is being prioritized correctly, particularly when multiple service flows with the same characteristics exist.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.5 snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.5.1 snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetPriority.1
Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosParamSetPriority OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.21 | docsQos3Mib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21.1 | docsQosMibObjects | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2 | docsQosParamSetTable | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1 | docsQosParamSetEntry | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.5 | docsQosParamSetPriority | DOCS-QOS3-MIB |