All MIBs › DOCS-QOS3-MIB › docsQosParamSetMaxTrafficBurst
docsQosParamSetMaxTrafficBurst
Module: DOCS-QOS3-MIB
OID (symbolic): DOCS-QOS3-MIB::docsQosParamSetMaxTrafficBurst
OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.2.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. This object is applied in conjunction with MaxTrafficRate to calculate maximum sustained traffic rate. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, this attribute returns 3044 for scheduling types 'bestEffort', 'nonRealTimePollingService' and 'realTimePollingService'.
If this parameter is not applicable, it is reported as 0.
What is docsQosParamSetMaxTrafficBurst?
Specifies the token-bucket burst size in bytes used alongside MaxTrafficRate to allow short bursts above the sustained rate. If unconfigured it defaults to 3044 bytes for best-effort and polling service types, or 0 if the parameter doesn't apply to this flow's scheduling type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.7 snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetMaxTrafficBurst
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.7.1 snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetMaxTrafficBurst.1
Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosParamSetMaxTrafficBurst OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.21 | docsQos3Mib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21.1 | docsQosMibObjects | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2 | docsQosParamSetTable | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1 | docsQosParamSetEntry | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.7 | docsQosParamSetMaxTrafficBurst | DOCS-QOS3-MIB |