All MIBs › DOCS-QOS3-MIB › docsQosParamSetMaxReqPerSidCluster
docsQosParamSetMaxReqPerSidCluster
Module: DOCS-QOS3-MIB
OID (symbolic): DOCS-QOS3-MIB::docsQosParamSetMaxReqPerSidCluster
OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.2.1.33
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute specifies the maximum number of requests that a CM can make within a given SID Cluster before it must switch to a different SID Cluster to make further requests. A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0 operation, in other cases it is reported as 0. If the referenced parameter is not present in the DOCSIS QOS Parameter Set, this attribute returns 0.
This attribute has been deprecated and replaced with docsQosServiceFlowMaxReqPerSidCluster in the docsQosServiceFlowTable.
What is docsQosParamSetMaxReqPerSidCluster?
Deprecated counterpart of docsQosServiceFlowMaxReqPerSidCluster; specified how many upstream requests a CM could make within one SID Cluster before switching clusters, with 0 meaning no limit. The MIB explicitly directs implementations to use docsQosServiceFlowMaxReqPerSidCluster in the newer table instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.33 snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetMaxReqPerSidCluster
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.33.1 snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetMaxReqPerSidCluster.1
Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosParamSetMaxReqPerSidCluster OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.21 | docsQos3Mib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21.1 | docsQosMibObjects | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2 | docsQosParamSetTable | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1 | docsQosParamSetEntry | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.33 | docsQosParamSetMaxReqPerSidCluster | DOCS-QOS3-MIB |