All MIBs › DOCS-QOS3-MIB › docsQosParamSetMaxLatency
docsQosParamSetMaxLatency
Module: DOCS-QOS3-MIB
OID (symbolic): DOCS-QOS3-MIB::docsQosParamSetMaxLatency
OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.2.1.22
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute specifies the maximum latency between the reception of a packet by the CMTS on its NSI and the forwarding of the packet to the RF interface. A value of 0 signifies no maximum latency is enforced. This attribute only applies to downstream Service Flows.
If the referenced parameter is not present in the corresponding downstream DOCSIS QOS Parameter Set, this attribute returns 0. This parameter is not applicable to upstream DOCSIS QOS Parameter Sets, so its value is reported as 0 in that case.
What is docsQosParamSetMaxLatency?
Specifies the maximum allowed delay, in microseconds, between the CMTS receiving a packet on its network-side interface and forwarding it onto the RF (cable) interface; applies only to downstream flows. A value of 0 means no latency cap is enforced, and the object always reports 0 for upstream flows since it doesn't apply there.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.22 snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetMaxLatency
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.2.1.22.1 snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosParamSetMaxLatency.1
Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosParamSetMaxLatency OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.21 | docsQos3Mib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21.1 | docsQosMibObjects | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2 | docsQosParamSetTable | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1 | docsQosParamSetEntry | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.22 | docsQosParamSetMaxLatency | DOCS-QOS3-MIB |