DLINKMGMT-MIB

All MIBs › DLINKMGMT-MIB

Organization: D-Link, Inc.

Last Updated: 2000-07-15

Description: D-Link enterprise MIB providing common management objects including software version, PROM firmware, hardware revision, and agent configuration for D-Link network devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINKMGMT-MIB?

DLINKMGMT-MIB is D-Link's top-level enterprise MIB providing common management objects shared across their network device product line, including software version, PROM/boot firmware version, hardware revision, and general agent configuration parameters. It exposes primarily identification and inventory-style data about the device rather than deep operational counters, serving as the structural root under which more specific D-Link product MIBs are organized. Its monitoring role is squarely software/hardware version and identity tracking -- confirming what firmware, PROM, and hardware revision a device is running, which is essential for verifying patch/upgrade compliance and troubleshooting version-specific bugs. As a common enterprise MIB, it is typically imported as a base/prerequisite by more specific D-Link product MIBs (e.g., switch- or router-specific modules) rather than depending on external standards. It is deployed across the D-Link enterprise switch and router product line as a shared management foundation. Engineers can download the DLINKMGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINKMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link switch
D-Link router
D-Link managed switches

Monitoring Examples

An administrator would poll the software version, PROM firmware version, and hardware revision scalar objects under this MIB to inventory exactly what code and hardware revision a fleet of D-Link devices is running, comparing results against a known-good version list. A device reporting an older software version than expected would flag it as needing a firmware upgrade before a known vulnerability patch. Because sample_objects were empty in the source, exact object names could not be confirmed, but the module_desc explicitly identifies software version, PROM firmware, and hardware revision as its core content.

What Can Be Monitored

software version
PROM firmware version
hardware revision
agent configuration

Imported Objects

From ID-REC-MIB

dlink

OBJECT-IDENTITY

From RFC1155-SMI

IpAddress
TimeTicks

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
dlinkMgmtMIB	1.3.6.1.4.1.326.2.20.1.11			The Structure of Common Management Information for the D-Link enterprise.
agentConfigInfo	1.3.6.1.4.1.326.2.20.1.11.1
agentBasicInfo	1.3.6.1.4.1.326.2.20.1.11.1.1
STR agentRuntimeSwVersion	1.3.6.1.4.1.326.2.20.1.11.1.1.1	DisplayString	read-only	This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
STR agentPromFwVersion	1.3.6.1.4.1.326.2.20.1.11.1.1.2	DisplayString	read-only	This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion would be 'Ver. 1.0'
STR agentHwRevision	1.3.6.1.4.1.326.2.20.1.11.1.1.3	DisplayString	read-only	This is a textual description of the hardware version and revision. If the version number is one and revision number is zero agentHwRevision would be 'Ver. 1.0'
INT agentMgmtProtocolCapability	1.3.6.1.4.1.326.2.20.1.11.1.1.4	INTEGER	read-only	The network management protocol(s) supported by this agent.
agentMibCapabilityTable	1.3.6.1.4.1.326.2.20.1.11.1.1.5		not-accessible	A list of MIB capability entries supported by this agent.
agentMibCapabilityEntry	1.3.6.1.4.1.326.2.20.1.11.1.1.5.1		not-accessible	A MIB capability entry contains objects describing a particular MIB supported by this agent.
INT agentMibCapabilityIndex	1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.1	INTEGER	read-only	A list of agentMibCapabilityDescr entries.
STR agentMibCapabilityDescr	1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.2	DisplayString	read-only	The name of the MIB supported by the agent.
INT agentMibCapabilityVersion	1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.3	INTEGER	read-only	The version of the MIB specified in this entry.
INT agentMibCapabilityType	1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.4	INTEGER	read-only	The type of the MIB specified in this entry.
INT agentMgmtRole	1.3.6.1.4.1.326.2.20.1.11.1.1.6	INTEGER	read-only	The role of this agent within this particular switch structure .
agentBasicConfig	1.3.6.1.4.1.326.2.20.1.11.1.2
STR agentFirmwareFile	1.3.6.1.4.1.326.2.20.1.11.1.2.1	DisplayString	read-write	The name of the firmware file to be downloaded.
IP agentFirmwareSourceAddr	1.3.6.1.4.1.326.2.20.1.11.1.2.2	IpAddress	read-write	The ip address where new firmware file is located on.
INT agentFirmwareUpdateCtrl	1.3.6.1.4.1.326.2.20.1.11.1.2.3	INTEGER	read-write	while this object is set to 'activate', FTP download is working immediately, and agentFirmwareUpdateState is changed to 'in-process'. The agent always returns 'other' while it is read.
INT agentFirmwareUpdateState	1.3.6.1.4.1.326.2.20.1.11.1.2.4	INTEGER	read-only	status of firmware download control. If the value is 'other', means never firmware updated since device started up.
TIK agentFirmwareLastUpdateTime	1.3.6.1.4.1.326.2.20.1.11.1.2.5	TimeTicks	read-only	record the sysUptime for last active agentFirmwareUpdateCtrl. Default is set to 0.
INT agentSystemReset	1.3.6.1.4.1.326.2.20.1.11.1.2.6	INTEGER	read-write	This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to warm-start(2) will reset the agent. The agent always returns no-reset(3) when this object is read.
INT agentRs232PortConfig	1.3.6.1.4.1.326.2.20.1.11.1.2.7	INTEGER	read-write	This object indicates the RS-232C mode while device restart.
INT agentOutOfBandBaudRateConfig	1.3.6.1.4.1.326.2.20.1.11.1.2.8	INTEGER	read-write	This object indicates the out_of_band baud rate while device restart.
agentIpProtoConfig	1.3.6.1.4.1.326.2.20.1.11.1.3
INT agentIpNumOfIf	1.3.6.1.4.1.326.2.20.1.11.1.3.1	INTEGER	read-only	The total number of IP interfaces supported by this agent.
agentIpIfTable	1.3.6.1.4.1.326.2.20.1.11.1.3.2		not-accessible	A list of IP interface entries supported by the agent.
agentIpIfEntry	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1		not-accessible	An agentIPIfEntry contains information about a particular IP interface.
INT agentIpIfIndex	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.1	INTEGER	read-only	This object uniquely identifies the IP interface number in the agentIpIfTable. This value should never greater than agentIpNumOfIf .
IP agentIpIfAddress	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.2	IpAddress	read-only	The IP address of the interface .
IP agentIpIfNetMask	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.3	IpAddress	read-only	The IP net mask for this interface .
IP agentIpIfDefaultRouter	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.4	IpAddress	read-only	The default gateway for this IP interface.
PHY agentIpIfMacAddr	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.5	PhysAddress	read-only	The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of zero length.
INT agentIpIfType	1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.6	INTEGER	read-only	The physical layer interface of the IP interface.
IP agentIpBootServerAddr	1.3.6.1.4.1.326.2.20.1.11.1.3.3	IpAddress	read-write	The IP Address of Boot Server.
INT agentIpGetIpFromBootpServer	1.3.6.1.4.1.326.2.20.1.11.1.3.4	INTEGER	read-write	This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up.
IP agentIpUnauthAddr	1.3.6.1.4.1.326.2.20.1.11.1.3.5	IpAddress	read-only	The IP address of an unauthorized SNMP packet.
STR agentIpUnauthComm	1.3.6.1.4.1.326.2.20.1.11.1.3.6	DisplayString	read-only	The community string of an unauthorized SNMP packet.
agentIpTrapManagerTable	1.3.6.1.4.1.326.2.20.1.11.1.3.9		not-accessible	A list of trap manager entries to which to send SNMP traps .
agentIpTrapManagerEntry	1.3.6.1.4.1.326.2.20.1.11.1.3.9.1		not-accessible	This entry contains the particular trap manager settings.
IP agentIpTrapManagerIpAddr	1.3.6.1.4.1.326.2.20.1.11.1.3.9.1.1	IpAddress	read-only	The IP address to receive SNMP traps from this device.
STR agentIpTrapManagerComm	1.3.6.1.4.1.326.2.20.1.11.1.3.9.1.2	DisplayString	read-create	The community string of the SNMP trap packet sent to the trap manager.
INT agentIpTrapManagerStatus	1.3.6.1.4.1.326.2.20.1.11.1.3.9.1.3	INTEGER	read-create	This object indicates whether or not the trap should be send to this trap manager.
INT agenMaxManagerIp	1.3.6.1.4.1.326.2.20.1.11.1.3.10	INTEGER	read-only	Maximum number of entries in the management ip security table (agentManagerIpSecurityTable).
INT agenCurrtManagerIp	1.3.6.1.4.1.326.2.20.1.11.1.3.11	INTEGER	read-only	Current applied number of entries in the management ip security table .
agentManagerIpSecurityTable	1.3.6.1.4.1.326.2.20.1.11.1.3.12		not-accessible	A table that contains information about security management ip . When the table is empty , the device permit any ip to manage the device . If the table is'nt empty , it will only permit the same destination address to manage the device .
agentManagerIpSecurityEntry	1.3.6.1.4.1.326.2.20.1.11.1.3.12.1		not-accessible	An entry containing a security ip address for a particular security request .
IP agentManagerIpSecurityAddr	1.3.6.1.4.1.326.2.20.1.11.1.3.12.1.1	IpAddress	read-only	The IP address for the security request .
INT agentManagerIpSecurityStatus	1.3.6.1.4.1.326.2.20.1.11.1.3.12.1.2	INTEGER	read-create	This object indicates the security ip address status . To writing disabled value to the object, and then the corresponding entry will be removed from the table.

RFC description

D-Link management MIB providing common management objects for D-Link network devices. Includes configuration and monitoring objects for D-Link switches, routers, and network appliances.

Start monitoring D-Link managed switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINKMGMT-MIB

What Is DLINKMGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description