DLB-RADIO3-DRV-MIB

All MIBs › DLB-RADIO3-DRV-MIB

Organization: Deliberant

Last Updated: 2010-01-06

Category: Technology: Wireless

Description: DLB radio driver MIB for third-generation radio providing PHY-level statistics and driver performance objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLB-RADIO3-DRV-MIB?

DLB-RADIO3-DRV-MIB is a Deliberant enterprise MIB for the driver layer of third-generation Deliberant wireless radios, exposing low-level PHY and link statistics gathered directly from the radio driver. It provides data on radio identity and configuration (MAC address, IP address, country code, encryption mode, capabilities) alongside performance counters such as transmit power and transmitted packet counts. For hardware/software status monitoring it is valuable for tracking radio link health and driver-reported activity, using dlbRdo3LastUpdate to confirm the driver is actively refreshing statistics and dlbRdo3TxPower/dlbRdo3TxPackets to gauge radio performance and throughput. It is a self-contained enterprise MIB without an evident dependency on external standard MIBs, focused purely on the vendor's radio driver internals. It is typically deployed on Deliberant point-to-point/point-to-multipoint outdoor wireless bridges used in WISP and long-range wireless backhaul networks. Engineers can download the DLB-RADIO3-DRV-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLB-RADIO3-DRV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Deliberant 3-series outdoor wireless radio/bridge

Monitoring Examples

An operator would poll the dlbRdo3StatsTable/dlbRdo3StatsEntry rows, keyed by dlbRdo3Endpoint, to retrieve per-endpoint dlbRdo3TxPower and dlbRdo3TxPackets and correlate them against dlbRdo3LastUpdate to ensure the statistics are current rather than stale from a hung driver. Checking dlbRdo3Encryption and dlbRdo3CountryCode confirms the radio's configured security mode and regulatory domain match policy. A sudden drop in dlbRdo3TxPackets with an unchanged dlbRdo3MacAddress/dlbRdo3IpAddress would indicate a radio that is still reachable on the network but has stopped transmitting, pointing to a driver or RF hardware fault.

What Can Be Monitored

radio MAC/IP address
country code / regulatory domain
encryption mode
transmit power
transmitted packet count
last statistics update time

Imported Objects

From DELIBERANT-MIB

dlbMgmt

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-MIB

sysLocation

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

MacAddress

How to Use in IPNetwork Monitor

Example using dlbRdo3TxPackets OID:

Select a Deliberant 3-series outdoor wireless radio/bridge as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dlbRdo3TxPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of transmitted packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dlbRadio3DrvMIB	1.3.6.1.4.1.32761.3.8			Deliberant 3 series radio driver MIB.
dlbRadio3DrvMIBObjects	1.3.6.1.4.1.32761.3.8.1
OCT dlbRdo3Capabilities	1.3.6.1.4.1.32761.3.8.1.3.1.1.8	OCTET STRING	read-only	Radio capabilities.
OCT dlbRdo3CountryCode	1.3.6.1.4.1.32761.3.8.1.3.1.1.5	OCTET STRING	read-only	Country code.
dlbRdo3DrvConf	1.3.6.1.4.1.32761.3.8.1.2
dlbRdo3DrvInfo	1.3.6.1.4.1.32761.3.8.1.1
dlbRdo3DrvNotifs	1.3.6.1.4.1.32761.3.8.1.0
dlbRdo3DrvStats	1.3.6.1.4.1.32761.3.8.1.3
OCT dlbRdo3Encryption	1.3.6.1.4.1.32761.3.8.1.3.1.1.6	OCTET STRING	read-only	Encryption type.
I32 dlbRdo3Endpoint	1.3.6.1.4.1.32761.3.8.1.3.1.1.1	Integer32	not-accessible	Peer index. Local device has index 0.
IP dlbRdo3IpAddress	1.3.6.1.4.1.32761.3.8.1.3.1.1.4	IpAddress	read-only	Device's IP address.
TIK dlbRdo3LastUpdate	1.3.6.1.4.1.32761.3.8.1.3.1.1.2	TimeTicks	read-only	sysUptime value of time point when statistics was gathered.
MAC dlbRdo3MacAddress	1.3.6.1.4.1.32761.3.8.1.3.1.1.3	MacAddress	read-only	Device's MAC address.
OCT dlbRdo3Parameters	1.3.6.1.4.1.32761.3.8.1.3.1.1.7	OCTET STRING	read-only	Radio parameters.
C32 dlbRdo3Rx40MhzBandwidth	1.3.6.1.4.1.32761.3.8.1.3.1.1.72	Counter32	read-only	Number of packets received using 40MHz bandwidth.
C32 dlbRdo3RxAclDiscarded	1.3.6.1.4.1.32761.3.8.1.3.1.1.42	Counter32	read-only	Number of received packets discarded by Access Control List check.
C32 dlbRdo3RxAmpdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.57	Counter32	read-only	Number of received aggregated MAC Protocol Data Units.
C32 dlbRdo3RxAmsdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.55	Counter32	read-only	Number of received aggregated MAC Service Data Units.
C32 dlbRdo3RxBlockAcks	1.3.6.1.4.1.32761.3.8.1.3.1.1.68	Counter32	read-only	Number of received block acknowledgments.
C32 dlbRdo3RxBroadcast	1.3.6.1.4.1.32761.3.8.1.3.1.1.48	Counter32	read-only	Number of received broadcast packets.
C32 dlbRdo3RxBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.36	Counter32	read-only	Number of received bytes.
C32 dlbRdo3RxCck	1.3.6.1.4.1.32761.3.8.1.3.1.1.51	Counter32	read-only	Number of packets received using Complementary Code Keying modulation.
C32 dlbRdo3RxControl	1.3.6.1.4.1.32761.3.8.1.3.1.1.44	Counter32	read-only	Number of received control packets.
C32 dlbRdo3RxCrcErrors	1.3.6.1.4.1.32761.3.8.1.3.1.1.38	Counter32	read-only	Number of received packets that failed CRC check.
C32 dlbRdo3RxData	1.3.6.1.4.1.32761.3.8.1.3.1.1.45	Counter32	read-only	Number of received data packets.
C32 dlbRdo3RxDropped	1.3.6.1.4.1.32761.3.8.1.3.1.1.37	Counter32	read-only	Number of dropped packets.
NTF dlbRdo3RxDropsThreshold	1.3.6.1.4.1.32761.3.8.1.0.1			This notification is sent when percentage of frames dropped in relation to number of frames received over the same time period reaches the threshold.
C32 dlbRdo3RxFragments	1.3.6.1.4.1.32761.3.8.1.3.1.1.69	Counter32	read-only	Number of received fragmented packets.
C32 dlbRdo3RxHtControl	1.3.6.1.4.1.32761.3.8.1.3.1.1.73	Counter32	read-only	Number of packets received using High Throughput encoding.
C32 dlbRdo3RxHtGreenfield	1.3.6.1.4.1.32761.3.8.1.3.1.1.54	Counter32	read-only	Number of packets received using High Throughput Greenfield mode.
C32 dlbRdo3RxHtMixedMode	1.3.6.1.4.1.32761.3.8.1.3.1.1.53	Counter32	read-only	Number of packets received using High Throughput mixed mode.
C32 dlbRdo3RxIcvErrors	1.3.6.1.4.1.32761.3.8.1.3.1.1.39	Counter32	read-only	Number of received packets with invalid Integrity Check Value.
C32 dlbRdo3RxKeyNotValid	1.3.6.1.4.1.32761.3.8.1.3.1.1.41	Counter32	read-only	Number of received packets with encryption key errors.
C32 dlbRdo3RxL2Pad	1.3.6.1.4.1.32761.3.8.1.3.1.1.67	Counter32	read-only	Number of packets received with padding between header and payload.
I32 dlbRdo3RxLastSigLevel0	1.3.6.1.4.1.32761.3.8.1.3.1.1.75	Integer32	read-only	Reception signal level on antenna 0.
I32 dlbRdo3RxLastSigLevel1	1.3.6.1.4.1.32761.3.8.1.3.1.1.76	Integer32	read-only	Reception signal level on antenna 1.
I32 dlbRdo3RxLastSigLevel2	1.3.6.1.4.1.32761.3.8.1.3.1.1.77	Integer32	read-only	Reception signal level on antenna 2.
I32 dlbRdo3RxLastSnr0	1.3.6.1.4.1.32761.3.8.1.3.1.1.79	Integer32	read-only	Last registered signal-to-noise level on antenna 0.
I32 dlbRdo3RxLastSnr1	1.3.6.1.4.1.32761.3.8.1.3.1.1.80	Integer32	read-only	Last registered signal-to-noise level on antenna 1.
C32 dlbRdo3RxManagement	1.3.6.1.4.1.32761.3.8.1.3.1.1.43	Counter32	read-only	Number of received management packets.
C32 dlbRdo3RxMicErrors	1.3.6.1.4.1.32761.3.8.1.3.1.1.40	Counter32	read-only	Number of received packets failing Message Integrity Code check.
C32 dlbRdo3RxMpduBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.58	Counter32	read-only	Number of bytes received in MAC Protocol Data Units.
C32 dlbRdo3RxMulticast	1.3.6.1.4.1.32761.3.8.1.3.1.1.49	Counter32	read-only	Number of received multicast packets.
I32 dlbRdo3RxNoise	1.3.6.1.4.1.32761.3.8.1.3.1.1.78	Integer32	read-only	Reception noise.
C32 dlbRdo3RxNullData	1.3.6.1.4.1.32761.3.8.1.3.1.1.47	Counter32	read-only	Number of received NULL DATA frames.
C32 dlbRdo3RxOfdm	1.3.6.1.4.1.32761.3.8.1.3.1.1.52	Counter32	read-only	Number of packets received using Orthogonal Frequency-Division Multiplexing modulation.
C32 dlbRdo3RxPackets	1.3.6.1.4.1.32761.3.8.1.3.1.1.35	Counter32	read-only	Number of received packets.
C32 dlbRdo3RxPacketsInAmsdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.56	Counter32	read-only	Number of packets received in aggregated MAC Service Data Units.
OCT dlbRdo3RxPacketsPerMcs	1.3.6.1.4.1.32761.3.8.1.3.1.1.74	OCTET STRING	read-only	Number of packets received using each of Modulation and Coding Schemes.
C32 dlbRdo3RxRoBufBuffered	1.3.6.1.4.1.32761.3.8.1.3.1.1.63	Counter32	read-only	Number of packets held in reordering buffer.
C32 dlbRdo3RxRoBufDup	1.3.6.1.4.1.32761.3.8.1.3.1.1.61	Counter32	read-only	Number of duplicate packets in reordering buffer.
C32 dlbRdo3RxRoBufExpired	1.3.6.1.4.1.32761.3.8.1.3.1.1.62	Counter32	read-only	Number of expired packets in reordering buffer.
C32 dlbRdo3RxRoBufFlushed	1.3.6.1.4.1.32761.3.8.1.3.1.1.65	Counter32	read-only	Number of packets flushed from reordering buffer.
C32 dlbRdo3RxRoBufInSeq	1.3.6.1.4.1.32761.3.8.1.3.1.1.60	Counter32	read-only	Number of packets in reordering buffer which are in sequence.
C32 dlbRdo3RxRoBufReordered	1.3.6.1.4.1.32761.3.8.1.3.1.1.64	Counter32	read-only	Number of packets reordered in reordering buffer.
C32 dlbRdo3RxRoBufTooBig	1.3.6.1.4.1.32761.3.8.1.3.1.1.66	Counter32	read-only	Number of oversized packets dropped from reordering buffer.
C32 dlbRdo3RxRoBufTotal	1.3.6.1.4.1.32761.3.8.1.3.1.1.59	Counter32	read-only	Total number of received packets moved into reordering buffer.
C32 dlbRdo3RxShortGuardInt	1.3.6.1.4.1.32761.3.8.1.3.1.1.71	Counter32	read-only	Number of packets received with Short Guard Interval.
C32 dlbRdo3RxStbc	1.3.6.1.4.1.32761.3.8.1.3.1.1.70	Counter32	read-only	Number of packets received using Space-Time Block Coding technique.
C32 dlbRdo3RxUnicast	1.3.6.1.4.1.32761.3.8.1.3.1.1.50	Counter32	read-only	Number of received unicast packets.
C32 dlbRdo3RxUnknown	1.3.6.1.4.1.32761.3.8.1.3.1.1.46	Counter32	read-only	Number of received packets of unknown type.
dlbRdo3StatsEntry	1.3.6.1.4.1.32761.3.8.1.3.1.1		not-accessible	Radio driver's information and network traffic statistics table entry.
dlbRdo3StatsTable	1.3.6.1.4.1.32761.3.8.1.3.1		not-accessible	Radio driver's information and network traffic statistics table.
C32 dlbRdo3TxAckRequired	1.3.6.1.4.1.32761.3.8.1.3.1.1.22	Counter32	read-only	Number of packets transmitted which required acknowledgment.
C32 dlbRdo3TxAltRate	1.3.6.1.4.1.32761.3.8.1.3.1.1.24	Counter32	read-only	Number of data rate alterations.
C32 dlbRdo3TxAmsduBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.30	Counter32	read-only	Number of bytes transmitted in aggregated MAC Service Data Units.
C32 dlbRdo3TxAmsdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.28	Counter32	read-only	Number of transmitted aggregated MAC Service Data Units.
C32 dlbRdo3TxBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.11	Counter32	read-only	Number of transmitted bytes.
C32 dlbRdo3TxFailed	1.3.6.1.4.1.32761.3.8.1.3.1.1.16	Counter32	read-only	Number of transmission failures.
C32 dlbRdo3TxFragBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.34	Counter32	read-only	Number of bytes transmitted in fragmented packets.
C32 dlbRdo3TxFragmented	1.3.6.1.4.1.32761.3.8.1.3.1.1.33	Counter32	read-only	Number of transmitted fragmented packets.
C32 dlbRdo3TxLegacy	1.3.6.1.4.1.32761.3.8.1.3.1.1.26	Counter32	read-only	Number of transmitted legacy packets.
C32 dlbRdo3TxLegacyBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.27	Counter32	read-only	Number of bytes transmitted in legacy mode.
C32 dlbRdo3TxManagement	1.3.6.1.4.1.32761.3.8.1.3.1.1.25	Counter32	read-only	Number of transmitted management frames.
C32 dlbRdo3TxMpduBytes	1.3.6.1.4.1.32761.3.8.1.3.1.1.32	Counter32	read-only	Number of bytes transmitted in MAC Protocol Data Units.
C32 dlbRdo3TxMpdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.31	Counter32	read-only	Number of transmitted MAC Protocol Data Units.
C32 dlbRdo3TxMsdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.20	Counter32	read-only	Number of transmitted MAC Service Data Units.
C32 dlbRdo3TxNoAckRequired	1.3.6.1.4.1.32761.3.8.1.3.1.1.23	Counter32	read-only	Number of packets transmitted which did not require acknowledgment.
C32 dlbRdo3TxNotAggregated	1.3.6.1.4.1.32761.3.8.1.3.1.1.21	Counter32	read-only	Number of packets transmitted without aggregation.
C32 dlbRdo3TxNotRetried	1.3.6.1.4.1.32761.3.8.1.3.1.1.18	Counter32	read-only	Number of packets sent without retries.
C32 dlbRdo3TxOverruns	1.3.6.1.4.1.32761.3.8.1.3.1.1.14	Counter32	read-only	Number of transmission overruns.
C32 dlbRdo3TxPacketsEx	1.3.6.1.4.1.32761.3.8.1.3.1.1.10	Counter32	read-only	Number of transmitted packets.
OCT dlbRdo3TxPacketsPerMcs	1.3.6.1.4.1.32761.3.8.1.3.1.1.19	OCTET STRING	read-only	Number of packets sent using each of Modulation and Coding Schemes.
C32 dlbRdo3TxPktsInAmsdus	1.3.6.1.4.1.32761.3.8.1.3.1.1.29	Counter32	read-only	Number of packets contained in transmitted aggregated MAC Service Data Units.
G32 dlbRdo3TxPower	1.3.6.1.4.1.32761.3.8.1.3.1.1.9	Gauge32	read-only	Transmission power.
C32 dlbRdo3TxRetried	1.3.6.1.4.1.32761.3.8.1.3.1.1.17	Counter32	read-only	Number of transmission retries.
NTF dlbRdo3TxRetriesThreshold	1.3.6.1.4.1.32761.3.8.1.0.2			This notification is sent when percentage of transmission retries in relation to number of frames transmitted over the same time period reaches the threshold.
C32 dlbRdo3TxSuccess	1.3.6.1.4.1.32761.3.8.1.3.1.1.15	Counter32	read-only	Number of successfully transmitted packets.
C32 dlbRdo3TxXmitDropped	1.3.6.1.4.1.32761.3.8.1.3.1.1.13	Counter32	read-only	Number of packets dropped because radio was offline or in reset state.
C32 dlbRdo3TxXmitFailed	1.3.6.1.4.1.32761.3.8.1.3.1.1.12	Counter32	read-only	Number of packets failing initial checks before sending them to radio hardware.

RFC description

Management Information Base for DLB Radio3 driver and radio frequency control. Provides objects for monitoring and managing radio interface parameters on DLB wireless networking equipment.

Start monitoring Deliberant 3-series outdoor wireless radio/bridge with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLB-RADIO3-DRV-MIB