All MIBs › DKSF-70-3-X-X-1 › npRelHumSafeRangeLow
npRelHumSafeRangeLow
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npRelHumSafeRangeLow
OID (numeric): 1.3.6.1.4.1.25728.8400.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Relative Humidity safe range, bottom margin, %RH
What is npRelHumSafeRangeLow?
This read-only INTEGER (0-100) is the configured bottom margin, in percent relative humidity, of the humidity sensor's safe range. An admin uses this as the floor below which npRelHumSensorStatusH reports belowSafeRange(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.8 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSafeRangeLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.8.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSafeRangeLow.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npRelHumSafeRangeLow OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8400.2.8 | npRelHumSafeRangeLow | DKSF-70-3-X-X-1 |