All MIBs › DKSF-70-3-X-X-1 › npRelHumSafeRangeHigh
npRelHumSafeRangeHigh
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npRelHumSafeRangeHigh
OID (numeric): 1.3.6.1.4.1.25728.8400.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Relative Humidity safe range, top margin, %RH
What is npRelHumSafeRangeHigh?
This read-only INTEGER (0-100) is the configured top margin, in percent relative humidity, of the humidity sensor's safe range. An admin uses this as the ceiling above which npRelHumSensorStatusH reports aboveSafeRange(3).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.7 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSafeRangeHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.7.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSafeRangeHigh.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npRelHumSafeRangeHigh OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8400.2.7 | npRelHumSafeRangeHigh | DKSF-70-3-X-X-1 |