DKSF-60-4-X-X-X :: npRelayStartReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-60-4-X-X-XnpRelayStartReset

npRelayStartReset

Module: DKSF-60-4-X-X-X

OID (symbolic): DKSF-60-4-X-X-X::npRelayStartReset

OID (numeric): 1.3.6.1.4.1.25728.5500.5.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Write 1 to start reset (switch relay off for some time)

What is npRelayStartReset?

This read-write INTEGER is a command register: writing 1 tells the device to switch the relay off briefly and back on, power-cycling whatever is plugged into that outlet. An admin uses it to force a remote reset of a hung device (like a router or camera) without visiting the site.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.5500.5.1.3
snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npRelayStartReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.5500.5.1.3.1
snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npRelayStartReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.5500.5.1.3.1 i <value>

Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npRelayStartReset OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5500npRelayDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5500.5npRelayTableDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5500.5.1npRelayEntryDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.5500.5.1.3npRelayStartResetDKSF-60-4-X-X-X