DKSF-60-4-X-X-X :: npPwrResetsCounter

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-60-4-X-X-XnpPwrResetsCounter

npPwrResetsCounter

Module: DKSF-60-4-X-X-X

OID (symbolic): DKSF-60-4-X-X-X::npPwrResetsCounter

OID (numeric): 1.3.6.1.4.1.25728.5800.3.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Counter of watchdog resets Write 0 to clear.

What is npPwrResetsCounter?

This read-write INTEGER counts how many times the watchdog has forced a power reset on this channel since the counter was last cleared. An admin checks it to gauge how often an attached device has been unresponsive enough to need a watchdog reset, and writes 0 to reset the count after investigating.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.5800.3.1.4
snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npPwrResetsCounter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.5800.3.1.4.1
snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npPwrResetsCounter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.5800.3.1.4.1 i <value>

Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npPwrResetsCounter OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5800npPwrDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5800.3npPwrTableDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5800.3.1npPwrEntryDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.5800.3.1.4npPwrResetsCounterDKSF-60-4-X-X-X