All MIBs › DKSF-50-11-X-X-X › npRelHumSafeRangeLow
npRelHumSafeRangeLow
Module: DKSF-50-11-X-X-X
OID (symbolic): DKSF-50-11-X-X-X::npRelHumSafeRangeLow
OID (numeric): 1.3.6.1.4.1.25728.8400.2.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Relative Humidity safe range, bottom margin, %RH
What is npRelHumSafeRangeLow?
This is the configured lower bound of the acceptable relative-humidity range, in %RH; npRelHumSensorStatusH reports belowSafeRange(1) once the reading drops below it. Set it above the point where static-discharge risk becomes a concern in dry conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.8 snmpwalk -v2c -c public <target> DKSF-50-11-X-X-X::npRelHumSafeRangeLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.8.1 snmpget -v2c -c public <target> DKSF-50-11-X-X-X::npRelHumSafeRangeLow.1
Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-11-X-X-X::npRelHumSafeRangeLow OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8400.2.8 | npRelHumSafeRangeLow | DKSF-50-11-X-X-X |