All MIBs › DKSF-48-4-X-X-1 › npRelayStartReset
npRelayStartReset
Module: DKSF-48-4-X-X-1
OID (symbolic): DKSF-48-4-X-X-1::npRelayStartReset
OID (numeric): 1.3.6.1.4.1.25728.5500.5.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Write 1 to start reset (switch relay off for some time)
What is npRelayStartReset?
Writing 1 to this control switches the relay off briefly and then back on, giving an admin a way to power-cycle whatever equipment is plugged into that outlet without touching the mode setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.5500.5.1.3 snmpwalk -v2c -c public <target> DKSF-48-4-X-X-1::npRelayStartReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.5500.5.1.3.1 snmpget -v2c -c public <target> DKSF-48-4-X-X-1::npRelayStartReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.5500.5.1.3.1 i <value>
Start monitoring NetPing DKSF-48 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-48-4-X-X-1::npRelayStartReset OID value, configure state conditions and alerts, and monitor any NetPing DKSF-48 remote sensing/relay device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.5500 | npRelay | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.5500.5 | npRelayTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.5500.5.1 | npRelayEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.5500.5.1.3 | npRelayStartReset | DKSF-48-4-X-X-1 |