All MIBs › DKSF-201-9-X-X-1 › npRelHumSensorStatusH
npRelHumSensorStatusH
Module: DKSF-201-9-X-X-1
OID (symbolic): DKSF-201-9-X-X-1::npRelHumSensorStatusH
OID (numeric): 1.3.6.1.4.1.25728.8400.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of Relative Humiduty
What is npRelHumSensorStatusH?
This OID reports the humidity status as sensor-failed, below the configured safe range, within the safe range, or above the safe range. An admin uses this as a quick alarm flag without manually comparing the raw humidity percentage to the configured thresholds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.5 snmpwalk -v2c -c public <target> DKSF-201-9-X-X-1::npRelHumSensorStatusH
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.5.1 snmpget -v2c -c public <target> DKSF-201-9-X-X-1::npRelHumSensorStatusH.1
Start monitoring NetPing DKSF-201 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-201-9-X-X-1::npRelHumSensorStatusH OID value, configure state conditions and alerts, and monitor any NetPing DKSF-201 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2.5 | npRelHumSensorStatusH | DKSF-201-9-X-X-1 |