DGS-1216T-DX-MIB

All MIBs › DGS-1216T-DX-MIB

Category: VLAN and Bridging, Vendor: D-Link

Description: Manages D-Link DGS-1216T 16-port Gigabit smart switch configuration and port management (DX).

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DGS-1216T-DX-MIB?

DGS-1216T-DX-MIB is a D-Link vendor MIB for the DGS-1216T 16-port Gigabit smart switch (DX hardware revision), part of D-Link's small-business Gigabit smart switch line, managing switch configuration and port-level settings. Though no sample objects were extracted, based on its product class it would expose port configuration/status, VLAN settings, and basic switch system information typical of D-Link smart switches. For monitoring it would be used to track hardware/software status such as per-port link state and speed/duplex, switch system uptime, and configuration state, giving administrators visibility into a compact desktop/rack switch's health. It is a proprietary enterprise MIB layered on standard MIB-II system and interface groups, following the pattern common to D-Link's smart switch MIB family. It is deployed on DGS-1216T-DX switches in small office, branch, or SMB network environments. Engineers can download the DGS-1216T-DX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DGS-1216T-DX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DGS-1216T-DX 16-port Gigabit smart switch

Monitoring Examples

An admin would poll standard-style port objects for this switch to confirm each of the 16 Gigabit ports shows the expected link speed/duplex and operational status, flagging a port that has unexpectedly dropped to a lower negotiated speed. System-level objects would be checked to confirm uptime and firmware version match expectations after a scheduled maintenance window. As a smart switch, monitoring here is typically simpler than on fully managed switches, focusing on basic port health and VLAN configuration correctness.

What Can Be Monitored

per-port link status and speed/duplex
VLAN configuration
system uptime
switch configuration state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
mib-2

From SNMPv2-SMI

Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
d_link	1.3.6.1.4.1.171
dlink_products	1.3.6.1.4.1.171.10
dlink_DGS12XXTSeriesProd	1.3.6.1.4.1.171.10.76
dgs_1216tdx	1.3.6.1.4.1.171.10.76.4
NTF swFiberInsert	1.3.6.1.4.1.171.10.76.4.0.1			Fiber insert trap.
NTF swFiberRemove	1.3.6.1.4.1.171.10.76.4.0.2			Fiber remove trap.
NTF swFiberAbnormalRXError	1.3.6.1.4.1.171.10.76.4.0.3			Fiber abnormal rx error trap.
NTF swFiberAbnormalTXError	1.3.6.1.4.1.171.10.76.4.0.4			Fiber abnormal tx error trap.
NTF swTPAbnormalRXError	1.3.6.1.4.1.171.10.76.4.0.5			Twisted Pair abnormal rx error trap.
NTF swTPAbnormalTXError	1.3.6.1.4.1.171.10.76.4.0.6			Twisted Pair abnormal tx error trap.
companyCommGroup	1.3.6.1.4.1.171.10.76.4.1
commSetTable	1.3.6.1.4.1.171.10.76.4.1.1		not-accessible	A list of SNMP Set Community Entries.
commSetEntry	1.3.6.1.4.1.171.10.76.4.1.1.1		not-accessible	A list of SNMP Set Community properties.
INT commSetIndex	1.3.6.1.4.1.171.10.76.4.1.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
STR commSetName	1.3.6.1.4.1.171.10.76.4.1.1.1.2	DisplayString	read-write	The name of this SNMP Set Community Entry.
ROW commSetStatus	1.3.6.1.4.1.171.10.76.4.1.1.1.3	RowStatus	read-write	The RowStatus for the Set Community entry.
commGetTable	1.3.6.1.4.1.171.10.76.4.1.2		not-accessible	A list of SNMP Get Community Entries.
commGetEntry	1.3.6.1.4.1.171.10.76.4.1.2.1		not-accessible	A list of SNMP Get Community properties.
INT commGetIndex	1.3.6.1.4.1.171.10.76.4.1.2.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
STR commGetName	1.3.6.1.4.1.171.10.76.4.1.2.1.2	DisplayString	read-write	The name of this SNMP Get Community Entry.
ROW commGetStatus	1.3.6.1.4.1.171.10.76.4.1.2.1.3	RowStatus	read-write	The RowStatus for the Get Community entry.
commTrapTable	1.3.6.1.4.1.171.10.76.4.1.3		not-accessible	A list of SNMP Trap Community Entries.
commTrapEntry	1.3.6.1.4.1.171.10.76.4.1.3.1		not-accessible	A list of SNMP Trap Community properties.
INT commTrapIndex	1.3.6.1.4.1.171.10.76.4.1.3.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
STR commTrapName	1.3.6.1.4.1.171.10.76.4.1.3.1.2	DisplayString	read-write	The name of this SNMP Trap Community Entry.
IP commTrapIpAddress	1.3.6.1.4.1.171.10.76.4.1.3.1.3	IpAddress	read-write	The IP Address of this SNMP Trap Community Entry.
INT commTrapSNMPBootup	1.3.6.1.4.1.171.10.76.4.1.3.1.5	INTEGER	read-write	Bootup trap
INT commTrapSNMPTPLinkUpDown	1.3.6.1.4.1.171.10.76.4.1.3.1.6	INTEGER	read-write	Twisted Pair link up / link down trap.
INT commTrapSNMPFiberLinkUpDown	1.3.6.1.4.1.171.10.76.4.1.3.1.7	INTEGER	read-write	Fiber link up / link down trap.
INT commTrapTrapAbnormalTPRXError	1.3.6.1.4.1.171.10.76.4.1.3.1.9	INTEGER	read-write	Twisted Pair abnormal receive error trap.
INT commTrapTrapAbnormalTPTXError	1.3.6.1.4.1.171.10.76.4.1.3.1.10	INTEGER	read-write	Twisted Pair abnormal transmit error trap.
INT commTrapTrapAbnormalFiberRXError	1.3.6.1.4.1.171.10.76.4.1.3.1.11	INTEGER	read-write	Fiber abnormal receive error trap.
INT commTrapTrapAbnormalFiberTXError	1.3.6.1.4.1.171.10.76.4.1.3.1.12	INTEGER	read-write	Fiber abnormal transmit error trap.
ROW commTrapStatus	1.3.6.1.4.1.171.10.76.4.1.3.1.13	RowStatus	read-write	The RowStatus for the Trap Community entry.
companyMiscGroup	1.3.6.1.4.1.171.10.76.4.3
INT miscReset	1.3.6.1.4.1.171.10.76.4.3.2	INTEGER	read-write	Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing.
INT miscStatisticsReset	1.3.6.1.4.1.171.10.76.4.3.3	INTEGER	read-write	Resets the units statistics. A (1) resets the unit, a (2) does nothing.
companySpanGroup	1.3.6.1.4.1.171.10.76.4.4
INT spanOnOff	1.3.6.1.4.1.171.10.76.4.4.1	INTEGER	read-write	Enable/Disable Spanning Tree. A (1) enables, a (2) disables.
companyConfigGroup	1.3.6.1.4.1.171.10.76.4.11
STR configVerSwPrimary	1.3.6.1.4.1.171.10.76.4.11.1	DisplayString	read-only	The software image version string.
STR configVerHwChipSet	1.3.6.1.4.1.171.10.76.4.11.2	DisplayString	read-only	The hardware chipset version string.
INT configBootTftpOperation	1.3.6.1.4.1.171.10.76.4.11.3	INTEGER	read-write	The tftp operation to perform downloading the boot image to the unit. This object is used in conjunction with configBootTftpServerIp and configBootImageFileName.
IP configBootTftpServerIp	1.3.6.1.4.1.171.10.76.4.11.4	IpAddress	read-write	The TFTP server's IP address used for downloading the boot image.
STR configBootImageFileName	1.3.6.1.4.1.171.10.76.4.11.5	DisplayString	read-write	The filename of the boot image to download.
configPortTable	1.3.6.1.4.1.171.10.76.4.11.6		not-accessible	A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces.
configPortEntry	1.3.6.1.4.1.171.10.76.4.11.6.1		not-accessible	An enterprise specific interface entry.
INT configPort	1.3.6.1.4.1.171.10.76.4.11.6.1.1	INTEGER	read-only	A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
INT configPortSpeed	1.3.6.1.4.1.171.10.76.4.11.6.1.2	INTEGER	read-write	The port's speed desired state.
INT configPortOperStatus	1.3.6.1.4.1.171.10.76.4.11.6.1.3	INTEGER	read-only	The port's operating speed state.
INT configPortFlowControl	1.3.6.1.4.1.171.10.76.4.11.6.1.4	INTEGER	read-write	The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled.
INT configPortFlowControlOper	1.3.6.1.4.1.171.10.76.4.11.6.1.5	INTEGER	read-only	The port's operating flow control state.
INT configVLANMode	1.3.6.1.4.1.171.10.76.4.11.7	INTEGER	read-write	Determines the VLAN mode.
configMirrorTable	1.3.6.1.4.1.171.10.76.4.11.8		not-accessible	A list of the Mirror
configMirrorEntry	1.3.6.1.4.1.171.10.76.4.11.8.1		not-accessible	A Mirror entry containing the Mirror id and mode.
INT configMirrorId	1.3.6.1.4.1.171.10.76.4.11.8.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Mirror Table. One entries are currently supported.
INT configMirrorMon	1.3.6.1.4.1.171.10.76.4.11.8.1.2	INTEGER	read-write	When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
POR configMirrorTXSrc	1.3.6.1.4.1.171.10.76.4.11.8.1.3	PortList	read-write	When mirroring is enabled , this identifies the TX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
POR configMirrorRXSrc	1.3.6.1.4.1.171.10.76.4.11.8.1.4	PortList	read-write	When mirroring is enabled , this identifies the RX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
ROW configMirrorStatus	1.3.6.1.4.1.171.10.76.4.11.8.1.5	RowStatus	read-write	The RowStatus for the Mirror entry.
INT configSNMPEnable	1.3.6.1.4.1.171.10.76.4.11.9	INTEGER	read-write	Enable/Disable SNMP function. A (1) enables, a (2) disables.
INT configIpAssignmentMode	1.3.6.1.4.1.171.10.76.4.11.12	INTEGER	read-write	Indicates whether the device address is assigned by the user (manual), or DHCP, or Others(BootP).
MAC configPhysAddress	1.3.6.1.4.1.171.10.76.4.11.13	MacAddress	read-only	The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
STR configPasswordAdmin	1.3.6.1.4.1.171.10.76.4.11.15	DisplayString	write-only	The adminstrator password
IP configIpAddress	1.3.6.1.4.1.171.10.76.4.11.16	IpAddress	read-write	The IP Address for the RDU box.
IP configNetMask	1.3.6.1.4.1.171.10.76.4.11.17	IpAddress	read-write	The network mask for the RDU box.
IP configGateway	1.3.6.1.4.1.171.10.76.4.11.18	IpAddress	read-write	The Gatway Address for the unit.
INT configSave	1.3.6.1.4.1.171.10.76.4.11.19	INTEGER	read-write	Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing.
INT configRestoreDefaults	1.3.6.1.4.1.171.10.76.4.11.22	INTEGER	read-write	Restores the configuration of the unit to the original settings.
IP configTftpServerIpAddress	1.3.6.1.4.1.171.10.76.4.11.32	IpAddress	read-write	The TFTP server's IP address used to upload or download configuration file.
STR configTftpServerFileName	1.3.6.1.4.1.171.10.76.4.11.33	DisplayString	read-write	The filename used to store or retrieve the configuration file from the tftp server.
INT configTftpOperation	1.3.6.1.4.1.171.10.76.4.11.34	INTEGER	read-write	The tftp operation to perform either downloading the configuration file to the unit or uploading the current configuration file to the tftp server. This object is used in conjunction with configTftpServerIpAddress and configTftpServerFileName.
INT configJumboEnable	1.3.6.1.4.1.171.10.76.4.11.43	INTEGER	read-write	Enable/Disable Jumbo Frame function. Maximum Length of jumbo frame is 10240 bytes.
INT configSafeguardEnable	1.3.6.1.4.1.171.10.76.4.11.44	INTEGER	read-write	Enable/Disable Safeguard Engine. D-Link Safeguard Engine is a robust and innovative technology developed by D-Link, which will automatically throttle the impact of packet flooding into the switch's CPU. It will keep D-Link Switches better protected from being too frequently interrupted by malicious viruses or worm attacks.
INT configPowerSavingEnable	1.3.6.1.4.1.171.10.76.4.11.45	INTEGER	read-write	Enable/Disable Power Saving function. The Power Saving mode is capable of reducing power consumption automatically when connected devices are switched off. By reducing power consumption, less heat is produced, resulting in extended product life and lower operating costs. By default, the Power Saving mode is enabled.
companyTVlanGroup	1.3.6.1.4.1.171.10.76.4.13
tvlanTable	1.3.6.1.4.1.171.10.76.4.13.1		not-accessible	A list of the VLANs
tvlanEntry	1.3.6.1.4.1.171.10.76.4.13.1.1		not-accessible	A VLAN entry containing the VLAN id and name.
INT tvlanId	1.3.6.1.4.1.171.10.76.4.13.1.1.1	INTEGER	read-only	The VLAN identifier. A maximum of 256 VLANs is supported. The value must be from 1 to 4094.
STR tvlanName	1.3.6.1.4.1.171.10.76.4.13.1.1.2	DisplayString	read-write	The VLAN name.Length must between 1 and 20.
POR tvlanMember	1.3.6.1.4.1.171.10.76.4.13.1.1.3	PortList	read-write	The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
POR tvlanUntaggedPorts	1.3.6.1.4.1.171.10.76.4.13.1.1.4	PortList	read-write	If that bit has a value of '1' the outgoing frame on the egress port is untagged. If that bit has a value of '0' the outgoing frame on the egress port is tagged.
INT tvlanStatus	1.3.6.1.4.1.171.10.76.4.13.1.1.5	INTEGER	read-write	The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
INT tvlanManagementOnOff	1.3.6.1.4.1.171.10.76.4.13.2	INTEGER	read-write	Enable/Disable management VLAN mechanism.
INT tvlanManagementid	1.3.6.1.4.1.171.10.76.4.13.3	INTEGER	read-write	The management VLAN ID which allow to forward to CPU.
tvlanPortTable	1.3.6.1.4.1.171.10.76.4.13.4		not-accessible	A list of ports and their associated VLAN.
tvlanPortEntry	1.3.6.1.4.1.171.10.76.4.13.4.1		not-accessible	Information pertaining to an individual port regarding to which VLAN it belongs.
INT tvlanPortPortId	1.3.6.1.4.1.171.10.76.4.13.4.1.1	INTEGER	read-only	A port identifier that is in the range of 1 to ifNumber.
INT tvlanPortVlanId	1.3.6.1.4.1.171.10.76.4.13.4.1.2	INTEGER	read-write	The default VLAN identifier, PVID. The value must be from 1 to 4094.
INT tvlanAsyOnOff	1.3.6.1.4.1.171.10.76.4.13.5	INTEGER	read-write	Enable/Disable IEEE 802.1Q Asymmetric VLAN
companyPortTrunkGroup	1.3.6.1.4.1.171.10.76.4.14
portTrunkTable	1.3.6.1.4.1.171.10.76.4.14.1		not-accessible	A list of port trunks and their associated members.
portTrunkEntry	1.3.6.1.4.1.171.10.76.4.14.1.1		not-accessible	A port trunk entry containing the trunk id and trunk members.
INT portTrunkId	1.3.6.1.4.1.171.10.76.4.14.1.1.1	INTEGER	read-only	The port trunk identifier. The current range is from 1 to 6.
STR portTrunkName	1.3.6.1.4.1.171.10.76.4.14.1.1.2	DisplayString	read-write	The Trunk name.Length must between 1 and 20.
POR portTrunkMember	1.3.6.1.4.1.171.10.76.4.14.1.1.3	PortList	read-write	A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
companyStaticGroup	1.3.6.1.4.1.171.10.76.4.21
INT staticOnOff	1.3.6.1.4.1.171.10.76.4.21.1	INTEGER	read-write	Enable/Disable Static MAC. Currently it doesn't support 'disabled' function.
POR staticAutoLearning	1.3.6.1.4.1.171.10.76.4.21.2	PortList	read-write	The set of the device's member ports that belong to the Static MAC auto learning enable/disable. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is in auto learning enable state; the port is not in auto learning state if its bit has a value of '0'.
staticTable	1.3.6.1.4.1.171.10.76.4.21.3		not-accessible	A list of the Static MACs
staticEntry	1.3.6.1.4.1.171.10.76.4.21.3.1		not-accessible	A Static MAC entry containing the mac and forwarding port.
INT staticId	1.3.6.1.4.1.171.10.76.4.21.3.1.1	INTEGER	read-only	The Static MAC identifier. A maximum of 60 Static MACs is supported. The value must be from 1 to 60
MAC staticMac	1.3.6.1.4.1.171.10.76.4.21.3.1.2	MacAddress	read-write	The Static MAC associated with the Id.
INT staticPort	1.3.6.1.4.1.171.10.76.4.21.3.1.3	INTEGER	read-write	The Static MAC forwarding port with the ID.
INT staticVlanID	1.3.6.1.4.1.171.10.76.4.21.3.1.4	INTEGER	read-write	The Static MAC VLAN ID with the ID.
INT staticStatus	1.3.6.1.4.1.171.10.76.4.21.3.1.5	INTEGER	read-write	The status of an entry in the Static MAC Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
companyIgsGroup	1.3.6.1.4.1.171.10.76.4.22
igsSystem	1.3.6.1.4.1.171.10.76.4.22.1
INT igsStatus	1.3.6.1.4.1.171.10.76.4.22.1.2	INTEGER	read-write	Enables or disables IGMP snooping in the system.
INT igsv3Processing	1.3.6.1.4.1.171.10.76.4.22.1.3	INTEGER	read-only	To enable processing of IGMPv3 messages and to operate in IGMPv3 mode, this object must be set to enabled, when set as disabled the operation will be in IGMPv2 mode.
INT igsRouterPortPurgeInterval	1.3.6.1.4.1.171.10.76.4.22.1.4	INTEGER	read-write	This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged.
INT igsHostPortPurgeInterval	1.3.6.1.4.1.171.10.76.4.22.1.5	INTEGER	read-only	This is the interval (in seconds) after which a learnt host port entry will be purged. For each host port learnt, a 'PortPurgeTimer' runs for 'HostPortPurgeInterval'. This timer will be restarted whenever a report message from host is received over that port. If no report mssages are received for 'HostPortPurgeInterval' time, the learnt host entry will be purged from the multicast group.
INT igsReportForwardInterval	1.3.6.1.4.1.171.10.76.4.22.1.6	INTEGER	read-only	This is the interval (in seconds) within which the next report messages for the same multicast group will not be forwarded out. The purpose of this timer is to avoid multiple report messages for the same group being forwarded out. So that unnecessary multicast packets in the network can be avoided. The 'ReportForwardTimer' is per multicast group. This timer is started as soon as a report message for that group is forwarded out. Within this 'ReportForwardInterval' if another report for the same group arrives, that report will not be forwarded. The first report message which is received for this group after the 'ReportForwardInterval' only will be forwarded out. When set as '0' , this timer will not be started and all the report messages will be forwarded as and when they are received.
INT igsLeaveProcessInterval	1.3.6.1.4.1.171.10.76.4.22.1.7	INTEGER	read-write	This is the interval (in seconds) after which a Leave message is forwarded on either router port(if present) or on all ports of a bridge (if no router port present). when a leave message from a host for a group is received by the bridge, The bridge will form a group-specific query and sends it on the port on which the leave message is received. A timer is started by a bridge with a time interval equal to IgsLeaveProcessInterval. If a report message is received before above timer expires, Leave message is dropped.Otherwise Leave message is either forwarded on all ports of the bridge or only on router port depending upon the case.
INT igsMcastEntryAgeingInterval	1.3.6.1.4.1.171.10.76.4.22.1.8	INTEGER	read-only	This is the interval (in seconds) after which the target will be checked for Multicast data hit for the entry This timer will be started for every (S, G) in the control plane.
INT igsSharedSegmentAggregationInterval	1.3.6.1.4.1.171.10.76.4.22.1.9	INTEGER	read-only	This is the interval (in seconds) for which reports of IGMPv3 messages on a shared segment will be aggregated for a group. This timer will be started only when multiple hosts are identified on a port for the Multicast group. The timer will be stopped when all but one host is left on the port for the Multicast group. This timer will be re-started on its expiry and Multicast forwarding table will be updated.
INT igsGblReportFwdOnAllPorts	1.3.6.1.4.1.171.10.76.4.22.1.10	INTEGER	read-only	IGMP snooping module will forward reports only on router ports by default, to enable forwarding on all other ports the object must be set to allports.
INT igsNextMcastFwdMode	1.3.6.1.4.1.171.10.76.4.22.1.13	INTEGER	read-only	This field describes the multicast forwarding mode that will be used upon restart of the ISS Switch.
INT igsQueryInterval	1.3.6.1.4.1.171.10.76.4.22.1.14	INTEGER	read-write	The frequency at which IGMP Host-Query packets are transmitted on this interface.
INT igsQueryMaxResponseTime	1.3.6.1.4.1.171.10.76.4.22.1.15	INTEGER	read-write	The maximum query response time advertised in IGMPv2 queries on this interface.
INT igsRobustnessValue	1.3.6.1.4.1.171.10.76.4.22.1.16	INTEGER	read-write	The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
INT igsLastMembQueryInterval	1.3.6.1.4.1.171.10.76.4.22.1.17	INTEGER	read-write	The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1.
INT igsQuerierStateOnOff	1.3.6.1.4.1.171.10.76.4.22.1.18	INTEGER	read-write	To enable transmitting IGMP Query packets or to disable.
igsVlan	1.3.6.1.4.1.171.10.76.4.22.3
igsVlanMcastFwdTable	1.3.6.1.4.1.171.10.76.4.22.3.1		not-accessible	This table contains VLAN based multicast forwarding information learnt when VLAN is ENABLED in the system.
igsVlanMcastFwdEntry	1.3.6.1.4.1.171.10.76.4.22.3.1.1		not-accessible	This table contains VlanId, multicast group address and the list of ports who have members for the multicast group.
INT igsVlanMcastFwdVlanIdMac	1.3.6.1.4.1.171.10.76.4.22.3.1.1.1	INTEGER	not-accessible	Vlan Id pertaining to the Multicast forwarding entry.
MAC igsVlanMcastFwdGroupAddress	1.3.6.1.4.1.171.10.76.4.22.3.1.1.2	MacAddress	not-accessible	MAC multicast group address.
POR igsVlanMcastFwdPortListMac	1.3.6.1.4.1.171.10.76.4.22.3.1.1.3	PortList	read-only	List of ports who have members for the MAC multicast group and the Vlan Id.
igsVlanRouterPortListTable	1.3.6.1.4.1.171.10.76.4.22.3.3		not-accessible	This table contains list of bridge ports through which a router, in a particular VLAN, is reachable.
igsVlanRouterPortListEntry	1.3.6.1.4.1.171.10.76.4.22.3.3.1		not-accessible	Contains VlanId of router , list of reachable router ports.
INT igsVlanRouterPortListVlanId	1.3.6.1.4.1.171.10.76.4.22.3.3.1.1	INTEGER	not-accessible	Vlan Id of the ports through which router is reachable.
POR igsVlanRouterPortList	1.3.6.1.4.1.171.10.76.4.22.3.3.1.2	PortList	read-only	Contains list of bridge ports through which a router, in a particular VLAN, is reachable. These router ports are learnt through control messages received from routers, and can also be configured statically.
igsVlanFilterTable	1.3.6.1.4.1.171.10.76.4.22.3.4		not-accessible	This table contains configuration to disable IGMP snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.
igsVlanFilterEntry	1.3.6.1.4.1.171.10.76.4.22.3.4.1		not-accessible	Contains Vlan Id , Vlan Filter Status.
INT igsVlanId	1.3.6.1.4.1.171.10.76.4.22.3.4.1.1	INTEGER	not-accessible	Vlan Id for which IGMP snooping feature is to be disabled.
INT igsVlanFilterStatus	1.3.6.1.4.1.171.10.76.4.22.3.4.1.2	INTEGER	read-write	When status is set as enabled, IGMP snooping feature is disabled for that Vlan Id. When status is set as disabled, the entry stands invalid. In that case IGMP snooping feature remains enabled for that Vlan.
companyDot1xGroup	1.3.6.1.4.1.171.10.76.4.23
radius	1.3.6.1.4.1.171.10.76.4.23.1
IP radiusServerAddress	1.3.6.1.4.1.171.10.76.4.23.1.1	IpAddress	read-write	The IP address of the RADIUS server.
INT radiusServerPort	1.3.6.1.4.1.171.10.76.4.23.1.2	INTEGER	read-write	The Port of the RADIUS server.
STR radiusServerSharedSecret	1.3.6.1.4.1.171.10.76.4.23.1.3	DisplayString	read-write	The secret string which is shared between Server and Client.
dot1xAuth	1.3.6.1.4.1.171.10.76.4.23.2
INT dot1xAuthSystemControl	1.3.6.1.4.1.171.10.76.4.23.2.1	INTEGER	read-write	Enable/Disable Static 802.1x. A (1) enables, a (2) disables.
INT dot1xAuthQuietPeriod	1.3.6.1.4.1.171.10.76.4.23.2.2	INTEGER	read-write	The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
INT dot1xAuthTxPeriod	1.3.6.1.4.1.171.10.76.4.23.2.3	INTEGER	read-write	The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
INT dot1xAuthSuppTimeout	1.3.6.1.4.1.171.10.76.4.23.2.4	INTEGER	read-write	The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.
INT dot1xAuthServerTimeout	1.3.6.1.4.1.171.10.76.4.23.2.5	INTEGER	read-write	The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
INT dot1xAuthMaxReq	1.3.6.1.4.1.171.10.76.4.23.2.6	INTEGER	read-write	The value of the maxReq constant currently in use by the Backend Authentication state machine.
U32 dot1xAuthReAuthPeriod	1.3.6.1.4.1.171.10.76.4.23.2.7	Unsigned32	read-write	The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
INT dot1xAuthReAuthEnabled	1.3.6.1.4.1.171.10.76.4.23.2.8	INTEGER	read-write	The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1).
dot1xAuthConfigPortTable	1.3.6.1.4.1.171.10.76.4.23.2.9		not-accessible	A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
dot1xAuthConfigPortEntry	1.3.6.1.4.1.171.10.76.4.23.2.9.1		not-accessible	The configuration information for an Authenticator Port.
INT dot1xAuthConfigPortNumber	1.3.6.1.4.1.171.10.76.4.23.2.9.1.1	INTEGER	read-only	A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
INT dot1xAuthConfigPortControl	1.3.6.1.4.1.171.10.76.4.23.2.9.1.2	INTEGER	read-write	The current value of the controlled Port control parameter for the Port.
INT dot1xAuthConfigPortStatus	1.3.6.1.4.1.171.10.76.4.23.2.9.1.3	INTEGER	read-only	The current value of the controlled Port status parameter for the Port.
TIK dot1xAuthConfigPortSessionTime	1.3.6.1.4.1.171.10.76.4.23.2.9.1.4	TimeTicks	read-only	The duration of the session in seconds.
STR dot1xAuthConfigPortSessionUserName	1.3.6.1.4.1.171.10.76.4.23.2.9.1.5	DisplayString	read-only	The User-Name representing the identity of the Supplicant PAE.
companyQoSGroup	1.3.6.1.4.1.171.10.76.4.26
INT qosMode	1.3.6.1.4.1.171.10.76.4.26.1	INTEGER	read-write	Settings of Qos mode: IEEE 802.1p QoS or DSCP QoS.
INT queuingMechanism	1.3.6.1.4.1.171.10.76.4.26.2	INTEGER	read-write	Queuing mechanism. strictPriority(1) : Strict Priority wrr(2) : Weighted Round Robin
dot1pPortTable	1.3.6.1.4.1.171.10.76.4.26.3		not-accessible	A list of 802.1p port default priority Entries.
dot1pPortEntry	1.3.6.1.4.1.171.10.76.4.26.3.1		not-accessible	A list of 802.1p port default priority priorities.
INT dot1pPortIndex	1.3.6.1.4.1.171.10.76.4.26.3.1.1	INTEGER	read-only	A port identifier that is in the range of 1 to ifNumber.
INT dot1pPortPriority	1.3.6.1.4.1.171.10.76.4.26.3.1.2	INTEGER	read-write	For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues.
dscpTable	1.3.6.1.4.1.171.10.76.4.26.4		not-accessible	A list of DSCP Entries.
dscpEntry	1.3.6.1.4.1.171.10.76.4.26.4.1		not-accessible	A list of DSCP properties.
INT dscpIndex	1.3.6.1.4.1.171.10.76.4.26.4.1.1	INTEGER	read-only	DSCP value. For ingress IP packets, the DiffServ field of IP packets provide DSCP-based traffic prioritization information to switches. D-Link Smart Switches will refer to the value of DiffServ filed information and prioritize them with 4 different priority queues.
INT dscpPriority	1.3.6.1.4.1.171.10.76.4.26.4.1.2	INTEGER	read-write	The queuing priority mapping to DSCP value.
companyTrafficMgmt	1.3.6.1.4.1.171.10.76.4.27
broadcastStormCtrlSettings	1.3.6.1.4.1.171.10.76.4.27.3
INT broadcastStormCtrlGlobalOnOff	1.3.6.1.4.1.171.10.76.4.27.3.1	INTEGER	read-write	This object indicates storm control function is enabled or disabled for device. When you enable broadcast storm control function, D-Link Smart Switches will allowed you to limit the number of broadcast packets per second going through device.
INT broadcastStormGlobalThreshold	1.3.6.1.4.1.171.10.76.4.27.3.2	INTEGER	read-write	The threshold value in unit of thousand bytes per second for broadcast traffic of the specific port.
companySecurity	1.3.6.1.4.1.171.10.76.4.28
trustedHostSettings	1.3.6.1.4.1.171.10.76.4.28.1
INT trustedHostOnOff	1.3.6.1.4.1.171.10.76.4.28.1.1	INTEGER	read-write	This object indicates trusted host function is enabled or disabled. When trusted host function is enabled, D-Link Smart Switches will only allow hosts which you trust to access and control the switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection.
trustedHostTable	1.3.6.1.4.1.171.10.76.4.28.1.2		not-accessible	A list of Trusted Host Entries.
trustedHostEntry	1.3.6.1.4.1.171.10.76.4.28.1.2.1		not-accessible	A list of Trusted Host properties.
INT trustedHostID	1.3.6.1.4.1.171.10.76.4.28.1.2.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Trusted Host Table. Three entries are currently supported.
IP trustedHostIpAddress	1.3.6.1.4.1.171.10.76.4.28.1.2.1.2	IpAddress	read-write	The IP address of host you allow to access to D-Link Smart Switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection.
IP trustedHostIpMask	1.3.6.1.4.1.171.10.76.4.28.1.2.1.3	IpAddress	read-write	Used to mask with IP address, it allow you set a subnet as a trusted host entry.
INT trustedHostStatus	1.3.6.1.4.1.171.10.76.4.28.1.2.1.4	INTEGER	read-write	The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.

RFC description

D-Link vendor-private MIB for the DGS-1216T-DX managed switch, covering SNMP management of switching, VLANs, QoS, and related features.

Start monitoring D-Link Gigabit smart switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DGS-1216T-DX-MIB

What Is DGS-1216T-DX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description