DGS-1216T-DX-MIB :: configJumboEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-1216T-DX-MIB › configJumboEnable

configJumboEnable

Module: DGS-1216T-DX-MIB

OID (symbolic): DGS-1216T-DX-MIB::configJumboEnable

OID (numeric): 1.3.6.1.4.1.171.10.76.4.11.43

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable/Disable Jumbo Frame function. Maximum Length of jumbo frame is 10240 bytes.

What is configJumboEnable?

Enables or disables jumbo-frame support, allowing this switch to forward frames up to 10240 bytes; an admin enables this to support applications like storage replication or large-payload video streams that rely on oversized frames.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.4.11.43
snmpwalk -v2c -c public <target> DGS-1216T-DX-MIB::configJumboEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.4.11.43.1
snmpget -v2c -c public <target> DGS-1216T-DX-MIB::configJumboEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.4.11.43.1 i <value>

Start monitoring D-Link Gigabit smart switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1216T-DX-MIB::configJumboEnable OID value, configure state conditions and alerts, and monitor any D-Link Gigabit smart switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.76dlink_DGS12XXTSeriesProdDGS-1216T-DX-MIB
1.3.6.1.4.1.171.10.76.4dgs_1216tdxDGS-1216T-DX-MIB
1.3.6.1.4.1.171.10.76.4.11companyConfigGroupDGS-1216T-DX-MIB
1.3.6.1.4.1.171.10.76.4.11.43configJumboEnableDGS-1216T-DX-MIB