CentricStorFS-MIB

All MIBs › CentricStorFS-MIB

Category: Storage

Description: Monitors CentricStor virtual tape library file system status and storage performance metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CentricStorFS-MIB?

This is a vendor-specific MIB from Fujitsu's CentricStor virtual tape library (VTL) storage platform, focused on the file system and storage-cluster layer of the product rather than tape drive emulation itself. It exposes data organized around a product identity branch, a cluster branch, a system-statistics (Sysstat) branch, and an NFS branch, indicating coverage of storage cluster configuration, general system/performance statistics, and NFS-based storage access. Its monitoring value centers on hardware/software status of the storage backend: cluster health and system statistics reflect the operational state of the VTL's underlying storage nodes, while the NFS branch lets an administrator confirm network-attached storage exports backing the virtual tape file system remain reachable and performant. No explicit external MIB dependency is indicated in the available text, though it likely follows standard SNMPv2-SMI enterprise MIB conventions. It is typically deployed in enterprise backup environments where CentricStorFS-MIB SNMP monitoring is used to ensure the storage cluster and its NFS-based file system remain healthy for ongoing backup and restore operations.

IPNetwork Monitor allows you to monitor SNMP objects defined in CentricStorFS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu CentricStor virtual tape library (VTL)

Monitoring Examples

An administrator would poll centricStorFSCluster to check overall storage cluster status and centricStorFSSysstat for system performance statistics such as throughput or utilization on the CentricStor VTL, alongside centricStorFSNFS to verify NFS-based storage connectivity is functioning. A degraded value under centricStorFSCluster combined with rising latency in centricStorFSSysstat would suggest a storage node or NFS export problem that could impact ongoing backup jobs. centricStorFSProduct would typically be checked once to confirm the product/version identity of the monitored VTL.

What Can Be Monitored

storage cluster status
system performance statistics
NFS export connectivity
product/version identity

Imported Objects

From RFC-1215

TRAP-TYPE

From SNMPv2-MIB

sysName

OBJECT-TYPE

From SNMPv2-SMI

Counter
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
centricStorFS	1.3.6.1.4.1.8010
NTF centricStorFSCluOK	1.3.6.1.4.1.8010.0.1			This trap will be sent any time the condition of the cluster becomes ok.
NTF centricStorFSCluDegraded	1.3.6.1.4.1.8010.0.2			This trap will be sent any time the condition of the cluster becomes degraded.
NTF centricStorFSCluFailed	1.3.6.1.4.1.8010.0.3			This trap will be sent any time the condition of the cluster becomes failed.
NTF centricStorFSCluNodeOK	1.3.6.1.4.1.8010.0.4			This trap will be sent any time the condition of a node in the cluster becomes ok.
NTF centricStorFSCluNodeDegraded	1.3.6.1.4.1.8010.0.5			This trap will be sent any time the condition of a node in the cluster becomes degraded. User Action: Make a note of the cluster node name then check the node for the cause of the degraded condition.
NTF centricStorFSCluNodeFailed	1.3.6.1.4.1.8010.0.6			This trap will be sent any time the condition of a node in the cluster becomes failed. User Action: Make a note of the cluster node name then check the node for the cause of the failure.
NTF centricStorFSCluResourceOK	1.3.6.1.4.1.8010.0.7			This trap will be sent any time the condition of a cluster resource becomes ok.
NTF centricStorFSCluResourceDegraded	1.3.6.1.4.1.8010.0.8			This trap will be sent any time the condition of a cluster resource becomes degraded. User Action: Make a note of the cluster resource name then check the resource for the cause of the degraded condition.
NTF centricStorFSCluResourceFailed	1.3.6.1.4.1.8010.0.9			This trap will be sent any time the condition of a cluster resource becomes failed. User Action: Make a note of the cluster resource name then check the resource for the cause of the failure.
NTF centricStorFSGenNormalEvent	1.3.6.1.4.1.8010.0.14			This trap will be sent for normal events.
NTF centricStorFSGenMinorEvent	1.3.6.1.4.1.8010.0.15			This trap will be sent for minor events.
NTF centricStorFSGenMajorEvent	1.3.6.1.4.1.8010.0.16			This trap will be sent for major events.
NTF centricStorFSGenCriticalEvent	1.3.6.1.4.1.8010.0.17			This trap will be sent for critical events.
NTF centricStorFSAntiVirusEvent	1.3.6.1.4.1.8010.0.18			The antivirus software on or connected to system detected a virus.
centricStorFSProduct	1.3.6.1.4.1.8010.1
STR centricStorFSProdType	1.3.6.1.4.1.8010.1.1	DisplayString	read-only	The product type.
STR centricStorFSProdVer	1.3.6.1.4.1.8010.1.2	DisplayString	read-only	The Product Version.
STR centricStorFSProdInstallDate	1.3.6.1.4.1.8010.1.3	DisplayString	read-only	The time the product was installed.
STR centricStorFSSystemURL	1.3.6.1.4.1.8010.1.4	DisplayString	read-only	The top-level URL of the system.
centricStorFSCluster	1.3.6.1.4.1.8010.2
STR centricStorFSCluName	1.3.6.1.4.1.8010.2.1	DisplayString	read-write	The name of the cluster.
INT centricStorFSCluCond	1.3.6.1.4.1.8010.2.2	INTEGER	read-only	The cluster condition as reported by this node. other(1) The cluster condition can not be determined. ok(2) The cluster condition is functioning normally. Every one of the nodes are up. degraded(3) The cluster condition is degraded if only one node from a pair of nodes is failed or degraded. failed(4) The cluster condition is failed if at least two nodes in a pair are failed
INT centricStorFSCluTotResourceCond	1.3.6.1.4.1.8010.2.3	INTEGER	read-only	The cluster resource aggregate condition as reported by this node. This condition is derived directly from each and every Cluster resource condition as defined later in the Cluster Resource group. other(1) The condition can not be determined, which equates to each and every resource condition as undetermined. ok(2) The condition is functioning normally, which equates to each and every resource condition as ok. degraded(3) The condition is degraded if at least one resource condition is degraded. failed(4) The condition is failed if at least one resource condition is failed.
centricStorFSCluNodeTable	1.3.6.1.4.1.8010.2.4		not-accessible	A list of the cluster nodes entries.
centricStorFSCluNodeEntry	1.3.6.1.4.1.8010.2.4.1		not-accessible	A centricStorFSCluNode entry contains general and conditional information about one node in the cluster.
INT centricStorFSCluNodeIdx	1.3.6.1.4.1.8010.2.4.1.1	INTEGER	read-only	A unique index for this node entry.
STR centricStorFSCluNodeName	1.3.6.1.4.1.8010.2.4.1.2	DisplayString	read-only	The name of the node.
INT centricStorFSCluNodeStatus	1.3.6.1.4.1.8010.2.4.1.3	INTEGER	read-only	The current status of the node. The following values are defined: other(1) - Indicates that an error has occurred and the exact state of the node could not be determined, or the node status is unavailable. nodeUp(2) - The node is operating as an active member of a cluster. A node that is up responds to updates to the cluster database, can host and manage groups, and can maintain communication with other nodes in the cluster. nodeDown(3) - The node is trying to form or rejoin a cluster or is down. A node that is down is not an active cluster member and it may or may not be running. The Cluster Service may have started and then failed, or may have failed to start completely. nodeAdminMode(4) - The node is down for maintenance: the administrator initiated a node failure.
INT centricStorFSCluTotResourcesPerNode	1.3.6.1.4.1.8010.2.4.1.4	INTEGER	read-only	This node resource aggregate condition. This condition is derived directly from each and every resource condition reported on this node. other(1) The condition can not be determined, which equates to each and every resource condition as undetermined. ok(2) The condition is functioning normally, which equates to each and every resource condition as ok. degraded(3) The condition is degraded if a both-mode resource on one node is failed. failed(4) The condition is failed if a resource doesn't work on BOTH nodes in one redundancy group or.
centricStorFSCluResourceTable	1.3.6.1.4.1.8010.2.5		not-accessible	A table of resources managed by the cluster reported by this MIB.
centricStorFSCluResourceEntry	1.3.6.1.4.1.8010.2.5.1		not-accessible	The properties describing a resource managed by the cluster.
INT centricStorFSCluResourceIdx	1.3.6.1.4.1.8010.2.5.1.1	INTEGER	read-only	A unique index for this resource entry.
STR centricStorFSCluResourceName	1.3.6.1.4.1.8010.2.5.1.2	DisplayString	read-only	The name of the resource. It must be unique within the cluster.
STR centricStorFSCluResourceOwnerNode	1.3.6.1.4.1.8010.2.5.1.4	DisplayString	read-only	The node in the cluster where the group of the resource is currently online.
STR centricStorFSCluResourceSubCluster	1.3.6.1.4.1.8010.2.5.1.5	DisplayString	read-only	The sub-cluster where the group of the resource is currently online.
STR centricStorFSCluResourceStatus	1.3.6.1.4.1.8010.2.5.1.6	DisplayString	read-only	The resource's current state. The following values are defined: other(1) - Indicates that an error has occurred and the exact state of the resource could not be determined or the resource state is unavailable. resourceStart(2) - The resource is up and functioning normally. resourceStop(3) - The resource is down - it has failed and does not functioning. resourceTakeover(4) - The resource has performed take over. resourceStandby(5) - The resource is in standby state - ready to start running.
centricStorFSSysstat	1.3.6.1.4.1.8010.3
centricStorFSCpuTable	1.3.6.1.4.1.8010.3.1		not-accessible	A table of information about the cpu.
centricStorFSCpuEntry	1.3.6.1.4.1.8010.3.1.1		not-accessible	Statistics about the cpu utilization on each node .
INT centricStorFSCpuNodeIdx	1.3.6.1.4.1.8010.3.1.1.1	INTEGER	read-only	A unique index for this node.
STR centricStorFSCpuNodeName	1.3.6.1.4.1.8010.3.1.1.2	DisplayString	read-only	A unique name for this node.
INT centricStorFSCpuIdle	1.3.6.1.4.1.8010.3.1.1.3	INTEGER	read-only	The CPU idle.
INT centricStorFSCpuUserTimePct	1.3.6.1.4.1.8010.3.1.1.4	INTEGER	read-only	The percentage of CPU (or CPUs) utilization that occurred while executing at the user mode (application)
INT centricStorFSCpuKernelTimePct	1.3.6.1.4.1.8010.3.1.1.5	INTEGER	read-only	The percentage of CPU (or CPUs) utilization that occurred while executing at the system mode (kernel)
centricStorFSIOStat	1.3.6.1.4.1.8010.3.2
CTR centricStorFSIOReadOps	1.3.6.1.4.1.8010.3.2.1	Counter	read-only	The total number of read type IO ops done.
CTR centricStorFSIOWriteOps	1.3.6.1.4.1.8010.3.2.2	Counter	read-only	The total number of write type IO ops done.
centricStorFSNFS	1.3.6.1.4.1.8010.7
centricStorFSNFSOps	1.3.6.1.4.1.8010.7.1
centricStorFSNFSV2Ops	1.3.6.1.4.1.8010.7.1.1
CTR centricStorFSNFSV2O	1.3.6.1.4.1.8010.7.1.1.1	Counter	read-only	The number of NFS Version 2 calls received, since the last boot.
CTR centricStorFSNFSV2ORead	1.3.6.1.4.1.8010.7.1.1.8	Counter	read-only	The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last boot.
CTR centricStorFSNFSV2OWrite	1.3.6.1.4.1.8010.7.1.1.10	Counter	read-only	The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last boot.
centricStorFSNFSV3Ops	1.3.6.1.4.1.8010.7.1.2
CTR centricStorFSNFSV3O	1.3.6.1.4.1.8010.7.1.2.1	Counter	read-only	The number of NFS Version 3 calls received, since the last boot.
CTR centricStorFSNFSV3ORead	1.3.6.1.4.1.8010.7.1.2.8	Counter	read-only	The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last boot.
CTR centricStorFSNFSV3OWrite	1.3.6.1.4.1.8010.7.1.2.9	Counter	read-only	The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last boot.
centricStorFSNFSPct	1.3.6.1.4.1.8010.7.2
centricStorFSNFSV2Pct	1.3.6.1.4.1.8010.7.2.1
INT centricStorFSNFSV2PRead	1.3.6.1.4.1.8010.7.2.1.7	INTEGER	read-only	The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure since the last boot, as a percentage of total RPC calls.
INT centricStorFSNFSV2PWrite	1.3.6.1.4.1.8010.7.2.1.9	INTEGER	read-only	The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure since the last boot, as a percentage of total RPC calls.
centricStorFSNFSV3Pct	1.3.6.1.4.1.8010.7.2.2
INT centricStorFSNFSV3PRead	1.3.6.1.4.1.8010.7.2.2.7	INTEGER	read-only	The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure since the last boot, as a percentage of total RPC calls.
INT centricStorFSNFSV3PWrite	1.3.6.1.4.1.8010.7.2.2.8	INTEGER	read-only	The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure since the last boot, as a percentage of total RPC calls.
centricStorFSNFSKB	1.3.6.1.4.1.8010.7.3
CTR centricStorFSNFSKBIn	1.3.6.1.4.1.8010.7.3.1	Counter	read-only	The amount of read operations in KB recived by the cluster.
CTR centricStorFSNFSKBOut	1.3.6.1.4.1.8010.7.3.2	Counter	read-only	The amount of write operations in KB recived by the cluster.
STR centricStorFSGenEventDesc	1.3.6.1.4.1.8010.10	DisplayString	read-only	A string describing the general event.
STR centricStorFSFileName	1.3.6.1.4.1.8010.11	DisplayString	read-only	The file name

RFC description

CentricStor filesystem cluster product information and NFS system statistics.

Start monitoring Fujitsu CentricStor virtual tape library (VTL, file system/cluster layer) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CentricStorFS-MIB

What Is CentricStorFS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description