CISCO-WLAN-VLAN-MIB :: cwvlWlanDot1qEncapEnabled

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WLAN-VLAN-MIB › cwvlWlanDot1qEncapEnabled

cwvlWlanDot1qEncapEnabled

Module: CISCO-WLAN-VLAN-MIB

OID (symbolic): CISCO-WLAN-VLAN-MIB::cwvlWlanDot1qEncapEnabled

OID (numeric): 1.3.6.1.4.1.9.9.268.1.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object enables and disables IEEE 802.1Q type encapsulation for all VLANs. If this object is set to 'false', then the 802.1Q encapsulation is disabled on all interfaces. If this object is set to 'true', then the 802.1Q encapsulation is enabled on all interfaces.

What is cwvlWlanDot1qEncapEnabled?

This read-write object globally enables or disables IEEE 802.1Q VLAN tag encapsulation across all interfaces on the device: true(1) turns it on everywhere, false(2) turns it off everywhere. It's a device-wide switch an admin sets when deciding whether the wireless unit should participate in a tagged-VLAN trunk topology at all. For example, connecting a wireless bridge to an access-layer switch trunk carrying multiple VLANs would require setting cwvlWlanDot1qEncapEnabled to true so the 802.1Q tags are preserved across all its interfaces.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.268.1.1.1
snmpwalk -v2c -c public <target> CISCO-WLAN-VLAN-MIB::cwvlWlanDot1qEncapEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.268.1.1.1.1
snmpget -v2c -c public <target> CISCO-WLAN-VLAN-MIB::cwvlWlanDot1qEncapEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.268.1.1.1.1 s <value>

Start monitoring Cisco wireless LAN infrastructure (802.11 APs/controllers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WLAN-VLAN-MIB::cwvlWlanDot1qEncapEnabled OID value, configure state conditions and alerts, and monitor any Cisco wireless LAN infrastructure (802.11 APs/controllers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.268ciscoWlanVlanMIBCISCO-WLAN-VLAN-MIB
1.3.6.1.4.1.9.9.268.1ciscoWlanVlanMIBObjectsCISCO-WLAN-VLAN-MIB
1.3.6.1.4.1.9.9.268.1.1cwvlRoamDomainConfigCISCO-WLAN-VLAN-MIB
1.3.6.1.4.1.9.9.268.1.1.1cwvlWlanDot1qEncapEnabledCISCO-WLAN-VLAN-MIB