| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoWanAtmPartyMIB | 1.3.6.1.4.1.9.9.99998 | | | A management station can use this MIB to provision,
manage or delete one or more 'parties' on an ATM
point-to-multipoint Soft PVCC(SPVC) connection.
The user must add a root endpoint to the managed system
before proceed to add one or more 'parties' to the root.
The provision and management of a 'root' endpoint is
beyond the scope of this MIB. Please refer to
CISCO-WAN-ATM-CONN-MIB.my for the provisioning and
management of a 'root' endpoint.
This MIB is based on 'ITU-T recommendation Q.2971 (10/95)
BROADBAND INTEGRATED SERVICES DIGITAL NETWORK (B-ISDN)
- DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 2 (DSS 2) -
USER-NETWORK INTERFACE LAYER 3 SPECIFICATION FOR POINT-
TO-MULTIPOINT CALL/CONNECTION CONTROL |
| ciscoWanAtmPartyMIBNotifs | 1.3.6.1.4.1.9.9.99998.0 | | | |
| ciscoWanAtmPartyMIBObjects | 1.3.6.1.4.1.9.9.99998.1 | | | |
| cwapConfig | 1.3.6.1.4.1.9.9.99998.1.1 | | | |
| cwapConfigTable | 1.3.6.1.4.1.9.9.99998.1.1.1 | | not-accessible | This table contains mandatory 'party' configuration
for all ATM point-to-multipoint Soft Permanent Virtual
Channel Connections (SPVC). |
| cwapConfigEntry | 1.3.6.1.4.1.9.9.99998.1.1.1.1 | | not-accessible | An entry in the 'cwapConfigTable'. Each entry
corresponds to one party of a point-to-multipoint
connection.
(1) To add an entry, the management
application must first provision a 'root' endpoint.
(2) While adding an entry, the variables
'cwapNSAPAddress', 'cwapVpi' and 'cwapVci' are
mandatory. The 'cwapNSAPAddress', 'csapVpi'
and 'cwapVci' are not required to be unique.
(3) The row creation will fail if the root endpoint does
not exist.
(4) The following management operations are permitted on
a row when the 'cwapRowStatus' is 'active':
a) row deletion.
b) toggling of the administrative status of a 'party'
via the 'cwapAdminStatus' object.
c) triggering a reroute via the 'cwapReroute' object.
(5) The table index 'ifIndex' refers to that of the root.
The 'ifIndex' identifies an ATM Virtual Interface
('ifType' atmVirtual(149)). |
| I32 cwapRootVpi | 1.3.6.1.4.1.9.9.99998.1.1.1.1.1 | Integer32 | not-accessible | This object identifies the Virtual Path
Identifier(VPI) of the root endpoint
this party is associated with. |
| I32 cwapRootVci | 1.3.6.1.4.1.9.9.99998.1.1.1.1.2 | Integer32 | not-accessible | This object identifies the Virtual
Channel Identifier (VCI) of the root
endpoint this party is associated with. |
| I32 cwapReference | 1.3.6.1.4.1.9.9.99998.1.1.1.1.3 | Integer32 | not-accessible | An arbitrary integer which serves to distinguish
between the multiple parties attached to a root of
a point-to-multipoint SPVC. |
| ADR cwapNSAPAddress | 1.3.6.1.4.1.9.9.99998.1.1.1.1.4 | WanNsapAtmAddress | read-create | The ATM NSAP address of this party. |
| I32 cwapVpi | 1.3.6.1.4.1.9.9.99998.1.1.1.1.5 | Integer32 | read-create | The VPI value of this party. |
| I32 cwapVci | 1.3.6.1.4.1.9.9.99998.1.1.1.1.6 | Integer32 | read-create | The VCI value of this party. |
| T/F cwapReroute | 1.3.6.1.4.1.9.9.99998.1.1.1.1.7 | TruthValue | read-create | The management station uses this object to trigger the
re-routing of the party.
* Rerouting takes effect, when this object is set to true(1).
When set to false(2), no action is taken.
* The value 'false' will always be returned on snmp query
to this variable.
* During reroute operation, the 'cwapOperStatus' will contain
the value 'fail'. Upon successful completion of reroute,
the 'cwapOperStatus' will change to the value 'ok'. If the
reroute operation failed, the 'cwapOperStatus' will stay in
'fail'. The management station should query the
'cwapOperStatus' to decide if a reroute request is
successful or not. |
| WAN cwapAdminStatus | 1.3.6.1.4.1.9.9.99998.1.1.1.1.8 | WanPartyAdminStatus | read-create | The 'administrative status' of this party. |
| WAN cwapOperStatus | 1.3.6.1.4.1.9.9.99998.1.1.1.1.9 | WanPartyOperStatus | read-only | The 'operational status' of this party. |
| U32 cwapIdentifier | 1.3.6.1.4.1.9.9.99998.1.1.1.1.10 | Unsigned32 | read-only | An arbitrary integer which serves to
distinguish all parties on a node.
This value is assigned by the managed
system when a party is added.
The use of this variable is implementation specific. |
| U32 cwapUploadCounter | 1.3.6.1.4.1.9.9.99998.1.1.1.1.11 | Unsigned32 | read-only | This counter is used by the management station to
determine if a party had been modified and requires
further action from management station.
The use of this variable is implementation specific.
This functionality is conventionally achieved by time
stamping using a time-of-day clock. However, in switches
where time-of-day clock is not available, the following
scheme is used:
The upload counter is incremented, when:
* assignment of a party to a cwapIdentifier. This
happens when a party is added and assigned this
cwapIdentifier.
* de-assignment of connection from a cwapIdentifier. This
happens when a connection is deleted.
* When there is a status change done to this party. |
| STR cwapRootPhysicalId | 1.3.6.1.4.1.9.9.99998.1.1.1.1.12 | DisplayString | read-only | This object contains physical description of the
physical interface the root resides. The presentation of
this object is implementation specific. |
| ROW cwapRowStatus | 1.3.6.1.4.1.9.9.99998.1.1.1.1.13 | RowStatus | read-create | This object is used to create, modify or delete an entry
in the ciscoWanAtmPartyTable.
* A row may be created using the 'CreateAndGo' option. When
the row is successfully created, the RowStatus would be
set to 'active' by the agent.
* A row may be deleted by setting the RowStatus to 'destroy'. |
| ciscoWanAtmPartyMIBConform | 1.3.6.1.4.1.9.9.99998.2 | | | |
| ciscoWanAtmPartyMIBCompliances | 1.3.6.1.4.1.9.9.99998.2.1 | | | |
| ciscoWanAtmPartyMIBCompliance | 1.3.6.1.4.1.9.9.99998.2.1.1 | | | The compliance statement for SNMPv2 entities which
implement one or more parties of an ATM point-to-
multi-point connection. |
| ciscoWanAtmPartyMIBGroups | 1.3.6.1.4.1.9.9.99998.2.2 | | | |
| ciscoWanAtmPartyGroup | 1.3.6.1.4.1.9.9.99998.2.2.2 | | | This group contains the information of a
'party' per each SPVC point-to-multipoint
connection. |
