All MIBs › CISCO-WAN-ATM-PARTY-MIB › cwapUploadCounter
cwapUploadCounter
Module: CISCO-WAN-ATM-PARTY-MIB
OID (symbolic): CISCO-WAN-ATM-PARTY-MIB::cwapUploadCounter
OID (numeric): 1.3.6.1.4.1.9.9.99998.1.1.1.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This counter is used by the management station to determine if a party had been modified and requires further action from management station.
The use of this variable is implementation specific.
This functionality is conventionally achieved by time stamping using a time-of-day clock. However, in switches where time-of-day clock is not available, the following scheme is used:
The upload counter is incremented, when:
* assignment of a party to a cwapIdentifier. This happens when a party is added and assigned this cwapIdentifier. * de-assignment of connection from a cwapIdentifier. This happens when a connection is deleted. * When there is a status change done to this party.
What is cwapUploadCounter?
This read-only object is used by a management station to detect whether a party has been modified and requires further action, incrementing on certain party changes as a substitute for a time-of-day timestamp on switches lacking a real-time clock. An admin's management station would poll this counter periodically and, on seeing it increase, know to re-fetch the party's current configuration rather than relying on cached data. This lets a management application efficiently detect changed parties without needing synchronized clocks across switches.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.99998.1.1.1.1.11 snmpwalk -v2c -c public <target> CISCO-WAN-ATM-PARTY-MIB::cwapUploadCounter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.99998.1.1.1.1.11.1 snmpget -v2c -c public <target> CISCO-WAN-ATM-PARTY-MIB::cwapUploadCounter.1
Start monitoring Cisco WAN switches (ATM point-to-multipoint SPVC, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-ATM-PARTY-MIB::cwapUploadCounter OID value, configure state conditions and alerts, and monitor any Cisco WAN switches (ATM point-to-multipoint SPVC, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.99998 | ciscoWanAtmPartyMIB | CISCO-WAN-ATM-PARTY-MIB |
| 1.3.6.1.4.1.9.9.99998.1 | ciscoWanAtmPartyMIBObjects | CISCO-WAN-ATM-PARTY-MIB |
| 1.3.6.1.4.1.9.9.99998.1.1 | cwapConfig | CISCO-WAN-ATM-PARTY-MIB |
| 1.3.6.1.4.1.9.9.99998.1.1.1 | cwapConfigTable | CISCO-WAN-ATM-PARTY-MIB |
| 1.3.6.1.4.1.9.9.99998.1.1.1.1 | cwapConfigEntry | CISCO-WAN-ATM-PARTY-MIB |
| 1.3.6.1.4.1.9.9.99998.1.1.1.1.11 | cwapUploadCounter | CISCO-WAN-ATM-PARTY-MIB |