All MIBs › CISCO-RTTMON-MIB › rttMplsVpnMonCtrlDelScanFactor
rttMplsVpnMonCtrlDelScanFactor
Module: CISCO-RTTMON-MIB
OID (symbolic): CISCO-RTTMON-MIB::rttMplsVpnMonCtrlDelScanFactor
OID (numeric): 1.3.6.1.4.1.9.9.42.1.2.15.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
Specifies the frequency at which the automatic PE deletion should take place.
This object specifies the number of times of rttMonMplslmCtrlScanInterval (rttMplsVpnMonCtrlDelScanFactor * rttMplsVpnMonCtrlScanInterval) to wait before removing the PEs. This object doesn't directly specify the explicit value to wait before removing the PEs that were down.
If this object set 0 the entries will never removed.
What is rttMplsVpnMonCtrlDelScanFactor?
A multiplier on the scan interval that determines how many scan cycles must pass with a PE router absent before its automatically created RTT operation is removed.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1 | ciscoRttMonObjects | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2 | rttMonCtrl | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.15 | rttMplsVpnMonCtrlTable | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.15.1 | rttMplsVpnMonCtrlEntry | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.8 | rttMplsVpnMonCtrlDelScanFactor | CISCO-RTTMON-MIB |