All MIBs › CISCO-RTTMON-MIB › rttMonReactThresholdType
rttMonReactThresholdType
Module: CISCO-RTTMON-MIB
OID (symbolic): CISCO-RTTMON-MIB::rttMonReactThresholdType
OID (numeric): 1.3.6.1.4.1.9.9.42.1.2.19.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
This object specifies the conditions under which the notification ( trap ) is sent.
never - rttMonReactOccurred is never set
immediate - rttMonReactOccurred is set to 'true' when the value of parameter for which reaction is configured ( e.g rtt, jitterAvg, packetLossSD, mos etc ) violates the threshold. Conversely, rttMonReactOccurred is set to 'false' when the parameter ( e.g rtt, jitterAvg, packetLossSD, mos etc ) is below the threshold limits.
consecutive - rttMonReactOccurred is set to true when the value of parameter for which reaction is configured ( e.g rtt, jitterAvg, packetLossSD, mos etc ) violates the threshold for configured consecutive times. Conversely, rttMonReactOccurred is set to false when the value of parameter ( e.g rtt, jitterAvg packetLossSD, mos etc ) is below the threshold limits for the same number of consecutive operations.
xOfy - rttMonReactOccurred is set to true when x ( as specified by rttMonReactThresholdCountX ) out of the last y ( as specified by rttMonReacthresholdCountY ) times the value of parameter for which the reaction is configured ( e.g rtt, jitterAvg, packetLossSD, mos etc ) violates the threshold. Conversely, it is set to false when x, out of the last y times the value of parameter ( e.g rtt, jitterAvg, packetLossSD, mos ) is below the threshold limits. NOTE: When x > y, the probe will never generate a reaction.
average - rttMonReactOccurred is set to true when the average ( rttMonReactThresholdCountX times ) value of parameter for which reaction is configured ( e.g rtt, jitterAvg, packetLossSD, mos etc ) violates the threshold condition. Conversely, it is set to false when the average value of parameter ( e.g rtt, jitterAvg, packetLossSD, mos etc ) is below the threshold limits.
If this value is changed by a management station, rttMonReactOccurred is set to false, but no reaction is generated if the prior value of rttMonReactOccurred was true.
What is rttMonReactThresholdType?
This OID specifies how the device should react when network response time exceeds a threshold (alert, restart service, trigger action, etc.). It determines what happens when a measured latency crosses your warning limits. An operator would configure this to define whether a slow response generates a warning email, a page, or automatic service restart.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1 | ciscoRttMonObjects | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2 | rttMonCtrl | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.19 | rttMonReactTable | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.19.1 | rttMonReactEntry | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.19.1.3 | rttMonReactThresholdType | CISCO-RTTMON-MIB |