CISCO-RTTMON-MIB :: rttMonLpdGrpStatsGroupStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-RTTMON-MIBrttMonLpdGrpStatsGroupStatus

rttMonLpdGrpStatsGroupStatus

Module: CISCO-RTTMON-MIB

OID (symbolic): CISCO-RTTMON-MIB::rttMonLpdGrpStatsGroupStatus

OID (numeric): 1.3.6.1.4.1.9.9.42.1.3.7.1.16

Node type: OBJECT-TYPE

Type: RttMplsVpnMonLpdGrpStatus

Access: read-only

Description: This object identifies the LPD Group status.

When the LPD Group status changes and rttMplsVpnMonReactLpdNotifyType is set to 'lpdGroupStatus' or 'lpdAll' a rttMonLpdGrpStatusNotification will be generated.

When the LPD Group status value is 'unknown' or changes to 'unknown' this notification will not be generated.

When LSP Path Discovery is enabled for a particular row in rttMplsVpnMonCtrlTable, 'single probes' in the 'lspGroup' probe cannot generate notifications independently but will be generating depending on the state of the group. Notifications are only generated if the failure/restoration of an individual probe causes the state of the LPD Group to change.

This object will be set to 'unknown' on reset.

What is rttMonLpdGrpStatsGroupStatus?

Reports the current status of the LPD group's path discovery, and can trigger an rttMonLpdGrpStatusNotification when it changes or becomes unknown, depending on the configured reaction type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.42.1.3.7.1.16
snmpwalk -v2c -c public <target> CISCO-RTTMON-MIB::rttMonLpdGrpStatsGroupStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.42.1.3.7.1.16.1
snmpget -v2c -c public <target> CISCO-RTTMON-MIB::rttMonLpdGrpStatsGroupStatus.1

Start monitoring Cisco Catalyst 9300 series switch (IP SLA/RTTMON) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-MIB::rttMonLpdGrpStatsGroupStatus OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 9300 series switch (IP SLA/RTTMON) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.42ciscoRttMonMIBCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1ciscoRttMonObjectsCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1.3rttMonStatsCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1.3.7rttMonLpdGrpStatsTableCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1.3.7.1rttMonLpdGrpStatsEntryCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1.3.7.1.16rttMonLpdGrpStatsGroupStatusCISCO-RTTMON-MIB