All MIBs › CISCO-RTTMON-MIB › rttMonJitterStatsSum2NegativesSDHigh
rttMonJitterStatsSum2NegativesSDHigh
Module: CISCO-RTTMON-MIB
OID (symbolic): CISCO-RTTMON-MIB::rttMonJitterStatsSum2NegativesSDHigh
OID (numeric): 1.3.6.1.4.1.9.9.42.1.3.5.1.21
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
The sum of square of RTT's of all negative jitter values from packets sent from source to destination (high order 32 bits).
What is rttMonJitterStatsSum2NegativesSDHigh?
This object records the high-order 32 bits of the sum of squares of all negative jitter RTT values from packets traveling from source to destination in a Cisco IP SLA operation. It is used in 64-bit jitter variance calculations when summed with a low-order counter. An operator uses this to evaluate jitter severity and network latency variations during end-to-end path analysis.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.42.1.3.5.1.21 snmpwalk -v2c -c public <target> CISCO-RTTMON-MIB::rttMonJitterStatsSum2NegativesSDHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.42.1.3.5.1.21.1 snmpget -v2c -c public <target> CISCO-RTTMON-MIB::rttMonJitterStatsSum2NegativesSDHigh.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1 | ciscoRttMonObjects | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.3 | rttMonStats | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.3.5 | rttMonJitterStatsTable | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.3.5.1 | rttMonJitterStatsEntry | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.3.5.1.21 | rttMonJitterStatsSum2NegativesSDHigh | CISCO-RTTMON-MIB |