All MIBs › CISCO-RTTMON-MIB › rttMonEchoAdminProtocol
rttMonEchoAdminProtocol
Module: CISCO-RTTMON-MIB
OID (symbolic): CISCO-RTTMON-MIB::rttMonEchoAdminProtocol
OID (numeric): 1.3.6.1.4.1.9.9.42.1.2.2.1.1
Node type: OBJECT-TYPE
Type: RttMonProtocol
Access: read-create
Description:
Specifies the protocol to be used to perform the RTT operation. The following list defines what protocol should be used for each probe type:
echo, pathEcho - ipIcmpEcho / mplsLspPingAppl udpEcho - ipUdpEchoAppl tcpConnect - ipTcpConn http - httpAppl jitter - jitterAppl dlsw - dlswAppl dhcp - dhcpAppl ftp - ftpAppl mplsLspPing - mplsLspPingAppl voip - voipAppl video - videoAppl
When this protocol does not support the type, a 'badValue' error will be returned.
What is rttMonEchoAdminProtocol?
Specifies which underlying protocol (e.g. ICMP echo, UDP echo, TCP connect) the RTT probe uses to perform its measurement, based on the probe type.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1 | ciscoRttMonObjects | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2 | rttMonCtrl | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.2 | rttMonEchoAdminTable | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.2.1 | rttMonEchoAdminEntry | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.1 | rttMonEchoAdminProtocol | CISCO-RTTMON-MIB |