All MIBs › CISCO-RTTMON-MIB › rttMonEchoAdminLSPSelector
rttMonEchoAdminLSPSelector
Module: CISCO-RTTMON-MIB
OID (symbolic): CISCO-RTTMON-MIB::rttMonEchoAdminLSPSelector
OID (numeric): 1.3.6.1.4.1.9.9.42.1.2.2.1.33
Node type: OBJECT-TYPE
Type: RttMonTargetAddress
Access: read-create
Description:
A string which specifies a valid 127/8 address. This address is of the form 127.x.y.z. This address is not used to route the MPLS echo packet to the destination but is used for load balancing in cases where the IP payload's destination address is used for load balancing.
What is rttMonEchoAdminLSPSelector?
This object specifies a loopback address (127.x.y.z format) used for load-balancing MPLS echo test packets in scenarios where the IP payload destination address is used to select paths. The loopback address guides which Label-Switched Path (LSP) is selected for testing without affecting the actual packet forwarding. Network engineers use this to direct MPLS echo tests toward specific paths when testing MPLS traffic engineering or equal-cost multipath routing.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1 | ciscoRttMonObjects | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2 | rttMonCtrl | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.2 | rttMonEchoAdminTable | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.2.1 | rttMonEchoAdminEntry | CISCO-RTTMON-MIB |
| 1.3.6.1.4.1.9.9.42.1.2.2.1.33 | rttMonEchoAdminLSPSelector | CISCO-RTTMON-MIB |