All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPStatsCollectAddress
crttMonIPStatsCollectAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPStatsCollectAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.4.1.2
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: A string which specifies the address of the collection target. This object, in conjunction with the crttMonIPStatsCollectAddressType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonStatsCollectAddress object, which can only specify an IPv4 address. In case the target is a V4 IP address then both crttMonIPStatsCollectAddressType/ crttMonIPStatsCollectAddress AND rttMonStatsCollectAddress may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonStatsCollectAddress OR crttMonIPStatsCollectAddressType/ crttMonIPStatsCollectAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPStatsCollectAddressType/ crttMonIPStatsCollectAddress must be used and rttMonStatsCollectAddress may not be instantiated or may have a zero length string.
What is crttMonIPStatsCollectAddress?
Read-only string reporting the target address (IPv4 or IPv6) for which IP SLA operation statistics were collected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.4.1.2 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPStatsCollectAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.4.1.2.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPStatsCollectAddress.1
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPStatsCollectAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.4 | crttMonIPStatsCollectTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.4.1 | crttMonIPStatsCollectEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.4.1.2 | crttMonIPStatsCollectAddress | CISCO-RTTMON-IP-EXT-MIB |