All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPLpdGrpStatsTargetPEAddr
crttMonIPLpdGrpStatsTargetPEAddr
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPLpdGrpStatsTargetPEAddr
OID (numeric): 1.3.6.1.4.1.9.9.572.1.5.1.2
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: A string which specifies the address of the target PE. This object, in conjunction with the crttMonIPLpdGrpStatsTargetPEAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonLpdGrpStatsTargetPE object, which can only specify an IPv4 address. In case the target is a V4 IP address then both crttMonIPLpdGrpStatsTargetPEAddrType/ crttMonIPLpdGrpStatsTargetPEAddr AND rttMonLpdGrpStatsTargetPE may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonLpdGrpStatsTargetPE OR crttMonIPLpdGrpStatsTargetPEAddrType/ crttMonIPLpdGrpStatsTargetPEAddr may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPLpdGrpStatsTargetPEAddrType/ crttMonIPLpdGrpStatsTargetPEAddr must be used and rttMonLpdGrpStatsTargetPE may not be instantiated or may have a zero length string.
What is crttMonIPLpdGrpStatsTargetPEAddr?
Read-only string reporting the target PE router's address (IPv4 or IPv6) for a group's LSP path discovery statistics.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.5.1.2 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPLpdGrpStatsTargetPEAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.5.1.2.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPLpdGrpStatsTargetPEAddr.1
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPLpdGrpStatsTargetPEAddr OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.5 | crttMonIPLpdGrpStatsTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.5.1 | crttMonIPLpdGrpStatsEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.5.1.2 | crttMonIPLpdGrpStatsTargetPEAddr | CISCO-RTTMON-IP-EXT-MIB |