All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPHistoryCollectionAddress
crttMonIPHistoryCollectionAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPHistoryCollectionAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.6.1.2
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: A string which specifies the address of the target. This object, in conjunction with the crttMonIPHistoryCollectionAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonHistoryCollectionAddress object, which can only specify an IPv4 address. In case the target is a V4 IP address then both crttMonIPHistoryCollectionAddrType/ crttMonIPHistoryCollectionAddress AND rttMonHistoryCollectionAddress may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonHistoryCollectionAddress OR crttMonIPHistoryCollectionAddrType/ crttMonIPHistoryCollectionAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPHistoryCollectionAddrType/ crttMonIPHistoryCollectionAddress must be used and rttMonHistoryCollectionAddress may not be instantiated or may have a zero length string.
What is crttMonIPHistoryCollectionAddress?
Read-only string reporting the target address (IPv4 or IPv6) recorded in a historical IP SLA operation record.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.6.1.2 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPHistoryCollectionAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.6.1.2.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPHistoryCollectionAddress.1
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPHistoryCollectionAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.6 | crttMonIPHistoryCollectionTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.6.1 | crttMonIPHistoryCollectionEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.6.1.2 | crttMonIPHistoryCollectionAddress | CISCO-RTTMON-IP-EXT-MIB |