All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPEchoPathAdminHopAddress
crttMonIPEchoPathAdminHopAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoPathAdminHopAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.3.1.2
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: A string which specifies the address of the hop. This object, together with the crttMonIPEchoPathAdminHopAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonEchoPathAdminHopAddress object, which can only specify an IPv4 address. In case the target is a V4 IP address then both crttMonIPEchoPathAdminHopAddrType/ crttMonIPEchoPathAdminHopAddress AND rttMonEchoPathAdminHopAddress may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonEchoPathAdminHopAddress OR crttMonIPEchoPathAdminHopAddrType/ crttMonIPEchoPathAdminHopAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPEchoPathAdminHopAddrType/ crttMonIPEchoPathAdminHopAddress must be used and rttMonEchoPathAdminHopAddress may not be instantiated or may have a zero length string.
What is crttMonIPEchoPathAdminHopAddress?
Read-write string specifying the address (IPv4 or IPv6) of an intermediate hop that an IP SLA path-echo operation should traverse or probe.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.3.1.2 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoPathAdminHopAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.3.1.2.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoPathAdminHopAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.572.1.3.1.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> crttMonIPEchoPathAdminHopAddress.1
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoPathAdminHopAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.3 | crttMonIPEchoPathAdminTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.3.1 | crttMonIPEchoPathAdminEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.3.1.2 | crttMonIPEchoPathAdminHopAddress | CISCO-RTTMON-IP-EXT-MIB |