All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPEchoAdminTargetAddress
crttMonIPEchoAdminTargetAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTargetAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.1.1.2
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: A string which specifies the address of the target. This object, in conjunction with the crttMonIPEchoAdminTargetAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonEchoAdminTargetAddress object, which may only specify an IPv4 address. In case the target is a V4 IP address then both crttMonIPEchoAdminTargetAddrType/ crttMonIPEchoAdminTargetAddress AND rttMonEchoAdminTargetAddress may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonEchoAdminTargetAddress OR crttMonIPEchoAdminTargetAddrType/ crttMonIPEchoAdminTargetAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPEchoAdminTargetAddrType/ crttMonIPEchoAdminTargetAddress must be used and rttMonEchoAdminTargetAddress may not be instantiated or may have a zero length string.
What is crttMonIPEchoAdminTargetAddress?
A configurable string specifying the destination address (IPv4 or IPv6) that an IP SLA ICMP echo probe targets, working alongside the address-type object as an extension to the original IPv4-only target address object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTargetAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTargetAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.572.1.1.1.2.1 s <value>
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTargetAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1 | crttMonIPEchoAdminTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1 | crttMonIPEchoAdminEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1.2 | crttMonIPEchoAdminTargetAddress | CISCO-RTTMON-IP-EXT-MIB |