All MIBs › CISCO-RTTMON-IP-EXT-MIB › crttMonIPEchoAdminSourceAddress
crttMonIPEchoAdminSourceAddress
Module: CISCO-RTTMON-IP-EXT-MIB
OID (symbolic): CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminSourceAddress
OID (numeric): 1.3.6.1.4.1.9.9.572.1.1.1.4
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: A string which specifies the address of the target. This object, together with the crttMonIPEchoAdminSourceAddrType object, may be used to specify either an IPv6 or an IPv4 address and is an alternative to the rttMonEchoAdminSourceAddress object, which may only specify an IPv4 address. In case the target is a V4 IP address then both crttMonIPEchoAdminSourceAddrType/ crttMonIPEchoAdminSourceAddress AND rttMonEchoAdminSourceAddress may be used to specify it so long as both try to specify the same V4 IP address. Alternatively only one of rttMonEchoAdminSourceAddress OR crttMonIPEchoAdminSourceAddrType/ crttMonIPEchoAdminSourceAddress may be used to specify the V4 IP address, in which case the other may either not be instantiated or contain a zero length string. In case the the target is a V6 IP address then only crttMonIPEchoAdminSourceAddrType/ crttMonIPEchoAdminSourceAddress must be used and rttMonEchoAdminSourceAddress may not be instantiated or may have a zero length string.
What is crttMonIPEchoAdminSourceAddress?
Read-write string holding the configured source address (IPv4 or IPv6) that an IP SLA echo operation uses to originate its test probes, extending the older IPv4-only source address object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminSourceAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.572.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminSourceAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.572.1.1.1.4.1 s <value>
Start monitoring Cisco routers/switches running IP SLA with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminSourceAddress OID value, configure state conditions and alerts, and monitor any Cisco routers/switches running IP SLA from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1 | crttMonIPExtObjects | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1 | crttMonIPEchoAdminTable | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1 | crttMonIPEchoAdminEntry | CISCO-RTTMON-IP-EXT-MIB |
| 1.3.6.1.4.1.9.9.572.1.1.1.4 | crttMonIPEchoAdminSourceAddress | CISCO-RTTMON-IP-EXT-MIB |